Re: [PATCH v2 1/9] PM: domains: Delete usage of driver_deferred_probe_check_state()

[Tony Lindgren <tony@atomide.com>]

* Saravana Kannan <saravanak@google.com> [220713 00:44]:
> On Tue, Jul 12, 2022 at 12:12 AM Tony Lindgren <tony@atomide.com> wrote:
> >
> > * Tony Lindgren <tony@atomide.com> [220701 16:00]:
> > > Also, looks like both with the initcall change for prm, and the patch
> > > below, there seems to be also another problem where my test devices no
> > > longer properly idle somehow compared to reverting the your two patches
> > > in next.
> >
> > Sorry looks like was a wrong conclusion. While trying to track down this
> > issue, I cannot reproduce it. So I don't see issues idling with either
> > the initcall change or your test patch.
> >
> > Not sure what caused my earlier tests to fail though. Maybe a config
> > change to enable more debugging, or possibly some kind of warm reset vs
> > cold reset type issue.
> 
> Thanks for getting back to me about the false alarm.

FYI I'm pretty sure I had also some pending sdhci related patches applied
while testing causing extra issues.

> OK, so it looks like my patch to drivers/of/property.c fixed the issue
> for you. In that case, let me test that a bit more thoroughly on my
> end to make sure it's not breaking any existing functionality. And if
> it's not breaking, I'll land that in the kernel eventually. Might be a
> bit too late for 5.19. I'm considering temporarily reverting my series
> depending on how the rest of the issues from my series go.

OK. Seems the series is otherwise working and in case of issues, partial
revert should be enough in the worst case. But yeah, probably some more
testing is needed.

Regards,

Tony