Re: [RFC net-next PATCH 1/3] dsa: Add ability to handle RMU frames.

[Andrew Lunn <andrew@lunn.ch>]

> +static int dsa_inband_rcv_ll(struct sk_buff *skb, struct net_device *dev)
> +{
> +	int source_device, source_port;
> +	struct dsa_switch *ds;
> +	u8 *dsa_header;
> +	int rcv_seqno;
> +	int ret = 0;
> +
> +	if (!dev || !dev->dsa_ptr)
> +		return 0;
> +
> +	ds = dev->dsa_ptr->ds;
> +
> +	dsa_header = skb->data - 2;
> +
> +	source_device = dsa_header[0] & 0x1f;
> +	source_port = (dsa_header[1] >> 3) & 0x1f;
> +	ds = dsa_switch_find(ds->dst->index, source_device);

You should never trust anything you receive from the network. Always
validate it. ds could be a NULL pointer here, if source_device is
bad. source_port could also be invalid. Hum, source port is not
actually used?

We send RMU frames with a specific destination MAC address. Can we
validate the destination address for frames we receive.

> +
> +	/* Get rcv seqno */
> +	rcv_seqno = dsa_header[3];
> +
> +	skb_pull(skb, DSA_HLEN);
> +
> +	if (ds->ops && ds->ops->inband_receive(ds, skb, rcv_seqno))
> +		netdev_err(dev, "DSA inband: error decoding packet");

rate limit this print, so as to avoid the possibility of a DoS.

     Andrew