From: Fan Ni <nifan.cxl@gmail.com>
To: alejandro.lucero-palau@amd.com
Cc: linux-cxl@vger.kernel.org, netdev@vger.kernel.org,
dan.j.williams@intel.com, martin.habets@xilinx.com,
edward.cree@amd.com, davem@davemloft.net, kuba@kernel.org,
pabeni@redhat.com, edumazet@google.com, dave.jiang@intel.com,
Alejandro Lucero <alucerop@amd.com>
Subject: Re: [PATCH v6 15/28] cxl: define a driver interface for HPA free space enumeration
Date: Fri, 6 Dec 2024 11:48:50 -0800 [thread overview]
Message-ID: <Z1NVInTC-fB9A7T8@mini> (raw)
In-Reply-To: <20241202171222.62595-16-alejandro.lucero-palau@amd.com>
On Mon, Dec 02, 2024 at 05:12:09PM +0000, alejandro.lucero-palau@amd.com wrote:
> From: Alejandro Lucero <alucerop@amd.com>
>
> CXL region creation involves allocating capacity from device DPA
> (device-physical-address space) and assigning it to decode a given HPA
> (host-physical-address space). Before determining how much DPA to
> allocate the amount of available HPA must be determined. Also, not all
> HPA is create equal, some specifically targets RAM, some target PMEM,
> some is prepared for device-memory flows like HDM-D and HDM-DB, and some
> is host-only (HDM-H).
>
> Wrap all of those concerns into an API that retrieves a root decoder
> (platform CXL window) that fits the specified constraints and the
> capacity available for a new region.
>
> Based on https://lore.kernel.org/linux-cxl/168592159290.1948938.13522227102445462976.stgit@dwillia2-xfh.jf.intel.com/
>
> Signed-off-by: Alejandro Lucero <alucerop@amd.com>
> Co-developed-by: Dan Williams <dan.j.williams@intel.com>
> ---
> drivers/cxl/core/region.c | 145 ++++++++++++++++++++++++++++++++++++++
> drivers/cxl/cxl.h | 3 +
> include/cxl/cxl.h | 8 +++
> 3 files changed, 156 insertions(+)
>
...
> + /*
> + * Walk the root decoder resource range relying on cxl_region_rwsem to
> + * preclude sibling arrival/departure and find the largest free space
> + * gap.
> + */
> + lockdep_assert_held_read(&cxl_region_rwsem);
> + max = 0;
> + res = cxlrd->res->child;
> + if (!res)
> + max = resource_size(cxlrd->res);
> + else
> + max = 0;
> +
> + for (prev = NULL; res; prev = res, res = res->sibling) {
> + struct resource *next = res->sibling;
> + resource_size_t free = 0;
> +
> + if (!prev && res->start > cxlrd->res->start) {
> + free = res->start - cxlrd->res->start;
> + max = max(free, max);
> + }
> + if (prev && res->start > prev->end + 1) {
> + free = res->start - prev->end + 1;
Should it be
free = res->start - (prev->end + 1);
?
> + max = max(free, max);
> + }
> + if (next && res->end + 1 < next->start) {
> + free = next->start - res->end + 1;
free = next->start - (res->end + 1);
Fan
> + max = max(free, max);
> + }
> + if (!next && res->end + 1 < cxlrd->res->end + 1) {
> + free = cxlrd->res->end + 1 - res->end + 1;
> + max = max(free, max);
> + }
> + }
> +
> + dev_dbg(CXLRD_DEV(cxlrd), "%s, found %pa bytes of free space\n",
> + __func__, &max);
> + if (max > ctx->max_hpa) {
> + if (ctx->cxlrd)
> + put_device(CXLRD_DEV(ctx->cxlrd));
> + get_device(CXLRD_DEV(cxlrd));
> + ctx->cxlrd = cxlrd;
> + ctx->max_hpa = max;
> + dev_dbg(CXLRD_DEV(cxlrd), "%s, found %pa bytes of free space\n",
> + __func__, &max);
> + }
> + return 0;
> +}
> +
> +/**
> + * cxl_get_hpa_freespace - find a root decoder with free capacity per constraints
> + * @endpoint: an endpoint that is mapped by the returned decoder
> + * @flags: CXL_DECODER_F flags for selecting RAM vs PMEM, and HDM-H vs HDM-D[B]
> + * @max_avail_contig: output parameter of max contiguous bytes available in the
> + * returned decoder
> + *
> + * The return tuple of a 'struct cxl_root_decoder' and 'bytes available given
> + * in (@max_avail_contig))' is a point in time snapshot. If by the time the
> + * caller goes to use this root decoder's capacity the capacity is reduced then
> + * caller needs to loop and retry.
> + *
> + * The returned root decoder has an elevated reference count that needs to be
> + * put with put_device(cxlrd_dev(cxlrd)). Locking context is with
> + * cxl_{acquire,release}_endpoint(), that ensures removal of the root decoder
> + * does not race.
> + */
> +struct cxl_root_decoder *cxl_get_hpa_freespace(struct cxl_memdev *cxlmd,
> + unsigned long flags,
> + resource_size_t *max_avail_contig)
> +{
> + struct cxl_port *endpoint = cxlmd->endpoint;
> + struct cxlrd_max_context ctx = {
> + .host_bridge = endpoint->host_bridge,
> + .flags = flags,
> + };
> + struct cxl_port *root_port;
> + struct cxl_root *root __free(put_cxl_root) = find_cxl_root(endpoint);
> +
> + if (!is_cxl_endpoint(endpoint)) {
> + dev_dbg(&endpoint->dev, "hpa requestor is not an endpoint\n");
> + return ERR_PTR(-EINVAL);
> + }
> +
> + if (!root) {
> + dev_dbg(&endpoint->dev, "endpoint can not be related to a root port\n");
> + return ERR_PTR(-ENXIO);
> + }
> +
> + root_port = &root->port;
> + down_read(&cxl_region_rwsem);
> + device_for_each_child(&root_port->dev, &ctx, find_max_hpa);
> + up_read(&cxl_region_rwsem);
> +
> + if (!ctx.cxlrd)
> + return ERR_PTR(-ENOMEM);
> +
> + *max_avail_contig = ctx.max_hpa;
> + return ctx.cxlrd;
> +}
> +EXPORT_SYMBOL_NS_GPL(cxl_get_hpa_freespace, CXL);
> +
> static ssize_t size_store(struct device *dev, struct device_attribute *attr,
> const char *buf, size_t len)
> {
> diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
> index 22e787748d79..57d6dda3fb4a 100644
> --- a/drivers/cxl/cxl.h
> +++ b/drivers/cxl/cxl.h
> @@ -785,6 +785,9 @@ static inline void cxl_dport_init_ras_reporting(struct cxl_dport *dport,
> struct cxl_decoder *to_cxl_decoder(struct device *dev);
> struct cxl_root_decoder *to_cxl_root_decoder(struct device *dev);
> struct cxl_switch_decoder *to_cxl_switch_decoder(struct device *dev);
> +
> +#define CXLRD_DEV(cxlrd) (&(cxlrd)->cxlsd.cxld.dev)
> +
> struct cxl_endpoint_decoder *to_cxl_endpoint_decoder(struct device *dev);
> bool is_root_decoder(struct device *dev);
> bool is_switch_decoder(struct device *dev);
> diff --git a/include/cxl/cxl.h b/include/cxl/cxl.h
> index 26d7735b5f31..eacd5e5e6fe8 100644
> --- a/include/cxl/cxl.h
> +++ b/include/cxl/cxl.h
> @@ -7,6 +7,10 @@
> #include <linux/ioport.h>
> #include <linux/pci.h>
>
> +#define CXL_DECODER_F_RAM BIT(0)
> +#define CXL_DECODER_F_PMEM BIT(1)
> +#define CXL_DECODER_F_TYPE2 BIT(2)
> +
> enum cxl_resource {
> CXL_RES_DPA,
> CXL_RES_RAM,
> @@ -47,4 +51,8 @@ int cxl_release_resource(struct cxl_dev_state *cxlds, enum cxl_resource type);
> void cxl_set_media_ready(struct cxl_dev_state *cxlds);
> struct cxl_memdev *devm_cxl_add_memdev(struct device *host,
> struct cxl_dev_state *cxlds);
> +struct cxl_port;
> +struct cxl_root_decoder *cxl_get_hpa_freespace(struct cxl_memdev *cxlmd,
> + unsigned long flags,
> + resource_size_t *max);
> #endif
> --
> 2.17.1
>
next prev parent reply other threads:[~2024-12-06 19:48 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-02 17:11 [PATCH v6 00/28] cxl: add type2 device basic support alejandro.lucero-palau
2024-12-02 17:11 ` [PATCH v6 01/28] " alejandro.lucero-palau
2024-12-02 17:11 ` [PATCH v6 02/28] sfc: add cxl support using new CXL API alejandro.lucero-palau
2024-12-03 14:21 ` Martin Habets
2024-12-03 20:33 ` Edward Cree
2024-12-04 9:30 ` Alejandro Lucero Palau
2024-12-02 17:11 ` [PATCH v6 03/28] cxl: add capabilities field to cxl_dev_state and cxl_port alejandro.lucero-palau
2024-12-03 4:50 ` kernel test robot
2024-12-03 22:24 ` Fan Ni
2024-12-02 17:11 ` [PATCH v6 04/28] cxl/pci: add check for validating capabilities alejandro.lucero-palau
2024-12-03 18:37 ` Zhi Wang
2024-12-03 18:55 ` Alejandro Lucero Palau
2024-12-03 22:55 ` Fan Ni
2024-12-04 8:58 ` Alejandro Lucero Palau
2024-12-02 17:11 ` [PATCH v6 05/28] cxl: move pci generic code alejandro.lucero-palau
2024-12-03 22:59 ` Fan Ni
2024-12-02 17:12 ` [PATCH v6 06/28] cxl: add function for type2 cxl regs setup alejandro.lucero-palau
2024-12-04 2:27 ` Fan Ni
2024-12-02 17:12 ` [PATCH v6 07/28] sfc: use cxl api for regs setup and checking alejandro.lucero-palau
2024-12-03 14:24 ` Martin Habets
2024-12-03 18:41 ` Zhi Wang
2024-12-02 17:12 ` [PATCH v6 08/28] cxl: add functions for resource request/release by a driver alejandro.lucero-palau
2024-12-03 18:42 ` Zhi Wang
2024-12-06 3:35 ` Fan Ni
2024-12-06 4:00 ` Kalesh Anakkur Purayil
2024-12-09 9:07 ` Alejandro Lucero Palau
2024-12-02 17:12 ` [PATCH v6 09/28] sfc: request cxl ram resource alejandro.lucero-palau
2024-12-03 14:25 ` Martin Habets
2024-12-06 4:10 ` Fan Ni
2024-12-06 4:28 ` Kalesh Anakkur Purayil
2024-12-09 9:12 ` Alejandro Lucero Palau
2024-12-02 17:12 ` [PATCH v6 10/28] cxl: harden resource_contains checks to handle zero size resources alejandro.lucero-palau
2024-12-02 17:12 ` [PATCH v6 11/28] cxl: add function for setting media ready by a driver alejandro.lucero-palau
2024-12-02 17:12 ` [PATCH v6 12/28] sfc: set cxl media ready alejandro.lucero-palau
2024-12-03 14:26 ` Martin Habets
2024-12-02 17:12 ` [PATCH v6 13/28] cxl: prepare memdev creation for type2 alejandro.lucero-palau
2024-12-06 16:56 ` Fan Ni
2024-12-09 9:14 ` Alejandro Lucero Palau
2024-12-02 17:12 ` [PATCH v6 14/28] sfc: create type2 cxl memdev alejandro.lucero-palau
2024-12-03 14:27 ` Martin Habets
2024-12-06 17:12 ` Fan Ni
2024-12-02 17:12 ` [PATCH v6 15/28] cxl: define a driver interface for HPA free space enumeration alejandro.lucero-palau
2024-12-03 9:44 ` kernel test robot
2024-12-06 19:48 ` Fan Ni [this message]
2024-12-09 9:22 ` Alejandro Lucero Palau
2024-12-02 17:12 ` [PATCH v6 16/28] sfc: obtain root decoder with enough HPA free space alejandro.lucero-palau
2024-12-03 2:34 ` kernel test robot
2024-12-03 14:34 ` Martin Habets
2024-12-03 15:24 ` Alejandro Lucero Palau
2024-12-06 21:36 ` Fan Ni
2024-12-09 9:24 ` Alejandro Lucero Palau
2024-12-02 17:12 ` [PATCH v6 17/28] cxl: define a driver interface for DPA allocation alejandro.lucero-palau
2024-12-02 17:12 ` [PATCH v6 18/28] sfc: get endpoint decoder alejandro.lucero-palau
2024-12-03 14:35 ` Martin Habets
2024-12-09 17:39 ` Fan Ni
2024-12-02 17:12 ` [PATCH v6 19/28] cxl: make region type based on endpoint type alejandro.lucero-palau
2024-12-09 18:03 ` Fan Ni
2024-12-02 17:12 ` [PATCH v6 20/28] cxl/region: factor out interleave ways setup alejandro.lucero-palau
2024-12-02 17:12 ` [PATCH v6 21/28] cxl/region: factor out interleave granularity setup alejandro.lucero-palau
2024-12-02 17:12 ` [PATCH v6 22/28] cxl: allow region creation by type2 drivers alejandro.lucero-palau
2024-12-02 17:12 ` [PATCH v6 23/28] sfc: create cxl region alejandro.lucero-palau
2024-12-03 14:37 ` Martin Habets
2024-12-03 15:25 ` Alejandro Lucero Palau
2024-12-04 8:33 ` Martin Habets
2024-12-02 17:12 ` [PATCH v6 24/28] cxl: add region flag for precluding a device memory to be used for dax alejandro.lucero-palau
2024-12-03 18:50 ` Zhi Wang
2024-12-02 17:12 ` [PATCH v6 25/28] sfc: specify no dax when cxl region is created alejandro.lucero-palau
2024-12-03 14:38 ` Martin Habets
2024-12-02 17:12 ` [PATCH v6 26/28] cxl: add function for obtaining region range alejandro.lucero-palau
2024-12-03 18:53 ` Zhi Wang
2024-12-09 9:48 ` Alejandro Lucero Palau
2024-12-09 16:29 ` Zhi Wang
2024-12-09 17:47 ` Alejandro Lucero Palau
2024-12-02 17:12 ` [PATCH v6 27/28] sfc: update MCDI protocol headers alejandro.lucero-palau
2024-12-03 14:41 ` Martin Habets
2024-12-03 17:38 ` Edward Cree
2024-12-02 17:12 ` [PATCH v6 28/28] sfc: support pio mapping based on cxl alejandro.lucero-palau
2024-12-03 14:52 ` Martin Habets
2024-12-03 15:30 ` Alejandro Lucero Palau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Z1NVInTC-fB9A7T8@mini \
--to=nifan.cxl@gmail.com \
--cc=alejandro.lucero-palau@amd.com \
--cc=alucerop@amd.com \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=edward.cree@amd.com \
--cc=kuba@kernel.org \
--cc=linux-cxl@vger.kernel.org \
--cc=martin.habets@xilinx.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).