From: Sabrina Dubroca <sd@queasysnail.net>
To: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org, Vadim Fedorenko <vfedorenko@novek.ru>,
Frantisek Krenzelok <fkrenzel@redhat.com>,
Kuniyuki Iwashima <kuniyu@amazon.com>,
Apoorv Kothari <apoorvko@amazon.com>,
Boris Pismenny <borisp@nvidia.com>,
John Fastabend <john.fastabend@gmail.com>,
Shuah Khan <shuah@kernel.org>,
linux-kselftest@vger.kernel.org, Gal Pressman <gal@nvidia.com>,
Marcel Holtmann <marcel@holtmann.org>,
Simon Horman <horms@kernel.org>
Subject: Re: [PATCH net-next v4 1/6] tls: block decryption when a rekey is pending
Date: Tue, 10 Dec 2024 17:16:09 +0100 [thread overview]
Message-ID: <Z1hpSbYKgytCFiPG@hog> (raw)
In-Reply-To: <20241203194701.48e74c8e@kernel.org>
2024-12-03, 19:47:01 -0800, Jakub Kicinski wrote:
> On Thu, 14 Nov 2024 16:50:48 +0100 Sabrina Dubroca wrote:
> > +static int tls_check_pending_rekey(struct tls_context *ctx, struct sk_buff *skb)
> > +{
> > + const struct tls_msg *tlm = tls_msg(skb);
> > + const struct strp_msg *rxm = strp_msg(skb);
> > + char hs_type;
> > + int err;
> > +
> > + if (likely(tlm->control != TLS_RECORD_TYPE_HANDSHAKE))
> > + return 0;
> > +
> > + if (rxm->full_len < 1)
> > + return -EINVAL;
> > +
> > + err = skb_copy_bits(skb, rxm->offset, &hs_type, 1);
> > + if (err < 0)
> > + return err;
> > +
> > + if (hs_type == TLS_HANDSHAKE_KEYUPDATE) {
> > + struct tls_sw_context_rx *rx_ctx = ctx->priv_ctx_rx;
> > +
> > + WRITE_ONCE(rx_ctx->key_update_pending, true);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > static int tls_rx_one_record(struct sock *sk, struct msghdr *msg,
> > struct tls_decrypt_arg *darg)
> > {
> > @@ -1739,6 +1769,10 @@ static int tls_rx_one_record(struct sock *sk, struct msghdr *msg,
> > rxm->full_len -= prot->overhead_size;
> > tls_advance_record_sn(sk, prot, &tls_ctx->rx);
> >
> > + err = tls_check_pending_rekey(tls_ctx, darg->skb);
> > + if (err < 0)
> > + return err;
>
> Sorry if I already asked this, is this 100% safe to error out from here
> after we decrypted the record? Normally once we successfully decrypted
> and pulled the message header / trailer we always call tls_rx_rec_done()
This is the same thing tls_rx_one_record does when tls_decrypt_sw
fails. Return <0 immediately, let the caller deal with the fallout. In
the case where tls_padding_length fails, tls_decrypt_sw has an extra
consume_skb though.
Returning an error here will make tls_rx_one_record() also return an
error, and when that happens we always call tls_err_abort(). It's a
big hammer, but it should be safe.
> The only reason the check_pending_rekey() can fail is if the message is
> mis-formatted, I wonder if we are better off ignoring mis-formatted
> rekeys? User space will see them and break the connection, anyway.
> Alternatively - we could add a selftest for this.
Going back to tls_check_pending_rekey():
> > + if (rxm->full_len < 1)
> > + return -EINVAL;
There's no real reason to fail here, we should probably just ignore
it. It's not a rekey, and it's not a valid handshake message, but one
could say that's not the kernel's problem. I'll make that return 0
unless you want to keep -EINVAL.
Hard to write a selftest for because we'd have to do a sendmsg with
len=0, or do the crypto in the selftest.
> > + err = skb_copy_bits(skb, rxm->offset, &hs_type, 1);
> > + if (err < 0)
> > + return err;
This probably means that the skb we got from the parser was broken. If
we can't read 1B with full_len >= 1, something's wrong. Maybe worth a
DEBUG_NET_WARN_ON_ONCE?
> > + if (hs_type == TLS_HANDSHAKE_KEYUPDATE) {
Here I don't actually check if it's a correct KeyUpdate message [1],
we pause decryption and let userspace decide what to do (probably
break the connection as you said).
[1] https://datatracker.ietf.org/doc/html/rfc8446#page-25
https://datatracker.ietf.org/doc/html/rfc8446#section-4.6.3
> > + struct tls_sw_context_rx *rx_ctx = ctx->priv_ctx_rx;
> > +
> > + WRITE_ONCE(rx_ctx->key_update_pending, true);
> > + }
> > +
> > + return 0;
> > +}
--
Sabrina
next prev parent reply other threads:[~2024-12-10 16:16 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-14 15:50 [PATCH net-next v4 0/6] tls: implement key updates for TLS1.3 Sabrina Dubroca
2024-11-14 15:50 ` [PATCH net-next v4 1/6] tls: block decryption when a rekey is pending Sabrina Dubroca
2024-12-04 3:47 ` Jakub Kicinski
2024-12-10 16:16 ` Sabrina Dubroca [this message]
2024-12-10 23:33 ` Jakub Kicinski
2024-12-05 12:30 ` Parthiban.Veerasooran
2024-11-14 15:50 ` [PATCH net-next v4 2/6] tls: implement rekey for TLS1.3 Sabrina Dubroca
2024-12-04 3:58 ` Jakub Kicinski
2024-11-14 15:50 ` [PATCH net-next v4 3/6] tls: add counters for rekey Sabrina Dubroca
2024-12-04 3:54 ` Jakub Kicinski
2024-12-05 11:29 ` Sabrina Dubroca
2024-11-14 15:50 ` [PATCH net-next v4 4/6] docs: tls: document TLS1.3 key updates Sabrina Dubroca
2024-12-04 3:51 ` Jakub Kicinski
2024-12-05 11:06 ` Sabrina Dubroca
2024-12-06 0:34 ` Jakub Kicinski
2024-11-14 15:50 ` [PATCH net-next v4 5/6] selftests: tls: add key_generation argument to tls_crypto_info_init Sabrina Dubroca
2024-11-14 15:50 ` [PATCH net-next v4 6/6] selftests: tls: add rekey tests Sabrina Dubroca
2024-11-19 3:41 ` [PATCH net-next v4 0/6] tls: implement key updates for TLS1.3 Jakub Kicinski
2024-12-03 16:16 ` Sabrina Dubroca
2024-12-04 4:02 ` Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Z1hpSbYKgytCFiPG@hog \
--to=sd@queasysnail.net \
--cc=apoorvko@amazon.com \
--cc=borisp@nvidia.com \
--cc=fkrenzel@redhat.com \
--cc=gal@nvidia.com \
--cc=horms@kernel.org \
--cc=john.fastabend@gmail.com \
--cc=kuba@kernel.org \
--cc=kuniyu@amazon.com \
--cc=linux-kselftest@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=netdev@vger.kernel.org \
--cc=shuah@kernel.org \
--cc=vfedorenko@novek.ru \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).