Re: [PATCH RFC net-next 06/10] net: mvpp2: add EEE implementation

["Russell King (Oracle)" <linux@armlinux.org.uk>]

On Wed, Jan 15, 2025 at 03:53:54PM +0100, Maxime Chevallier wrote:
> Hello Russell,
> 
> On Tue, 14 Jan 2025 14:02:29 +0000
> "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk> wrote:
> 
> > Add EEE support for mvpp2, using phylink's EEE implementation, which
> > means we just need to implement the two methods for LPI control, and
> > with the initial configuration. Only SGMII mode is supported, so only
> > 100M and 1G speeds.
> > 
> > Disabling LPI requires clearing a single bit. Enabling LPI needs a full
> > configuration of several values, as the timer values are dependent on
> > the MAC operating speed.
> > 
> > Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
> > --
> > v3: split LPI timer limit and validation into separate patches
> > ---
> >  drivers/net/ethernet/marvell/mvpp2/mvpp2.h    |  5 ++
> >  .../net/ethernet/marvell/mvpp2/mvpp2_main.c   | 86 +++++++++++++++++++
> >  2 files changed, 91 insertions(+)
> > 
> > diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
> > index 9e02e4367bec..364d038da7ea 100644
> > --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
> > +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
> > @@ -481,6 +481,11 @@
> >  #define MVPP22_GMAC_INT_SUM_MASK		0xa4
> >  #define     MVPP22_GMAC_INT_SUM_MASK_LINK_STAT	BIT(1)
> >  #define	    MVPP22_GMAC_INT_SUM_MASK_PTP	BIT(2)
> > +#define MVPP2_GMAC_LPI_CTRL0			0xc0
> > +#define     MVPP2_GMAC_LPI_CTRL0_TS_MASK	GENMASK(8, 8)
> 
> I think this should be GENMASK(15, 8) :)

Bah.

Thanks for spotting... and people say GENMASK() is better than using
hex. I've disagreed with that, but tried to conform, but I keep making
mistakes with GENMASK(), but never have with hex notation. Maybe I'm
just different from most people, having been programming computers in
assembly since the 1980s, where the choices were decimal or hex!

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!