From: "Russell King (Oracle)" <linux@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>, Heiner Kallweit <hkallweit1@gmail.com>
Cc: Eric Woudstra <ericwouds@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
netdev@vger.kernel.org
Subject: Re: [PATCH RFC net-next] net: phylink: always do a major config when attaching a SFP PHY
Date: Wed, 15 Jan 2025 23:19:39 +0000 [thread overview]
Message-ID: <Z4hCiwfLL2q2rIMM@shell.armlinux.org.uk> (raw)
In-Reply-To: <E1tXhIJ-000me6-SA@rmk-PC.armlinux.org.uk>
Hi Eric,
I'd like to get a tested-by from you before sending this for merging,
as this should fix your reported issue.
Thanks.
On Tue, Jan 14, 2025 at 01:49:23PM +0000, Russell King (Oracle) wrote:
> Background: https://lore.kernel.org/r/20250107123615.161095-1-ericwouds@gmail.com
>
> Since adding negotiation of in-band capabilities, it is no longer
> sufficient to just look at the MLO_AN_xxx mode and PHY interface to
> decide whether to do a major configuration, since the result now
> depends on the capabilities of the attaching PHY.
>
> Always trigger a major configuration in this case.
>
> Reported-by: Eric Woudstra <ericwouds@gmail.com>
> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
> ---
> This follows on from https://lore.kernel.org/r/Z4TbR93B-X8A8iHe@shell.armlinux.org.uk "net: phylink: fix PCS without autoneg"
>
> drivers/net/phy/phylink.c | 11 +++++------
> 1 file changed, 5 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
> index ff0efb52189f..7d64182cf802 100644
> --- a/drivers/net/phy/phylink.c
> +++ b/drivers/net/phy/phylink.c
> @@ -3412,12 +3412,11 @@ static phy_interface_t phylink_choose_sfp_interface(struct phylink *pl,
> return interface;
> }
>
> -static void phylink_sfp_set_config(struct phylink *pl,
> - unsigned long *supported,
> - struct phylink_link_state *state)
> +static void phylink_sfp_set_config(struct phylink *pl, unsigned long *supported,
> + struct phylink_link_state *state,
> + bool changed)
> {
> u8 mode = MLO_AN_INBAND;
> - bool changed = false;
>
> phylink_dbg(pl, "requesting link mode %s/%s with support %*pb\n",
> phylink_an_mode_str(mode), phy_modes(state->interface),
> @@ -3494,7 +3493,7 @@ static int phylink_sfp_config_phy(struct phylink *pl, struct phy_device *phy)
>
> pl->link_port = pl->sfp_port;
>
> - phylink_sfp_set_config(pl, support, &config);
> + phylink_sfp_set_config(pl, support, &config, true);
>
> return 0;
> }
> @@ -3569,7 +3568,7 @@ static int phylink_sfp_config_optical(struct phylink *pl)
>
> pl->link_port = pl->sfp_port;
>
> - phylink_sfp_set_config(pl, pl->sfp_support, &config);
> + phylink_sfp_set_config(pl, pl->sfp_support, &config, false);
>
> return 0;
> }
> --
> 2.30.2
>
>
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
next prev parent reply other threads:[~2025-01-15 23:19 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-14 13:49 [PATCH RFC net-next] net: phylink: always do a major config when attaching a SFP PHY Russell King (Oracle)
2025-01-15 23:19 ` Russell King (Oracle) [this message]
2025-01-16 18:46 ` Eric Woudstra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Z4hCiwfLL2q2rIMM@shell.armlinux.org.uk \
--to=linux@armlinux.org.uk \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=ericwouds@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).