From: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
To: Grant Grundler <grundler@chromium.org>
Cc: Oleksij Rempel <linux@rempel-privat.de>,
Pavel Skripkin <paskripkin@gmail.com>,
Lukas Wunner <lukas@wunner.de>,
Eizan Miyamoto <eizan@chromium.org>,
Jakub Kicinski <kuba@kernel.org>, netdev <netdev@vger.kernel.org>,
"David S . Miller" <davem@davemloft.net>,
LKML <linux-kernel@vger.kernel.org>,
Anton Lundin <glance@acc.umu.se>
Subject: Re: [PATCHv4 net] net: asix: fix modprobe "sysfs: cannot create duplicate filename"
Date: Tue, 14 Mar 2023 14:22:37 +0100 [thread overview]
Message-ID: <ZBB1HR3ow/sGigFB@localhost.localdomain> (raw)
In-Reply-To: <20230314055410.3329480-1-grundler@chromium.org>
On Mon, Mar 13, 2023 at 10:54:10PM -0700, Grant Grundler wrote:
> "modprobe asix ; rmmod asix ; modprobe asix" fails with:
> sysfs: cannot create duplicate filename \
> '/devices/virtual/mdio_bus/usb-003:004'
>
> Issue was originally reported by Anton Lundin on 2022-06-22 (link below).
>
> Chrome OS team hit the same issue in Feb, 2023 when trying to find
> work arounds for other issues with AX88172 devices.
>
> The use of devm_mdiobus_register() with usbnet devices results in the
> MDIO data being associated with the USB device. When the asix driver
> is unloaded, the USB device continues to exist and the corresponding
> "mdiobus_unregister()" is NOT called until the USB device is unplugged
> or unauthorized. So the next "modprobe asix" will fail because the MDIO
> phy sysfs attributes still exist.
>
> The 'easy' (from a design PoV) fix is to use the non-devm variants of
> mdiobus_* functions and explicitly manage this use in the asix_bind
> and asix_unbind function calls. I've not explored trying to fix usbnet
> initialization so devm_* stuff will work.
>
> Fixes: e532a096be0e5 ("net: usb: asix: ax88772: add phylib support")
> Reported-by: Anton Lundin <glance@acc.umu.se>
> Link: https://lore.kernel.org/netdev/20220623063649.GD23685@pengutronix.de/T/
> Tested-by: Eizan Miyamoto <eizan@chromium.org>
> Signed-off-by: Grant Grundler <grundler@chromium.org>
>
> ---
> drivers/net/usb/asix_devices.c | 33 ++++++++++++++++++++++++++++-----
> 1 file changed, 28 insertions(+), 5 deletions(-)
>
> V4: add mdio_unregister to ax88172_bind() error handling paths
>
> V3: rebase against netdev/net.git
> remove "TEST" prefix in subject line
> added Link: tag for Reported-by tag
>
> V2: moved mdiobus_get_phy() call back into ax88772_init_phy()
> (Lukas Wunner is entirely correct this patch is much easier
> to backport without this patch hunk.)
> Added "Fixes:" tag per request from Florian Fainelli
>
> diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
> index 743cbf5d662c..b758010bab36 100644
> --- a/drivers/net/usb/asix_devices.c
> +++ b/drivers/net/usb/asix_devices.c
> @@ -666,8 +666,9 @@ static int asix_resume(struct usb_interface *intf)
> static int ax88772_init_mdio(struct usbnet *dev)
> {
> struct asix_common_private *priv = dev->driver_priv;
> + int ret;
>
> - priv->mdio = devm_mdiobus_alloc(&dev->udev->dev);
Hi,
Patch looks good, one question, are the devm_mdiobus_alloc() and
devm_mdiobus_register functions used anywhere after removing? Maybe it
is worth to remove also the implementation if it isn't used.
Otherwise
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
> + priv->mdio = mdiobus_alloc();
> if (!priv->mdio)
> return -ENOMEM;
>
> @@ -679,7 +680,20 @@ static int ax88772_init_mdio(struct usbnet *dev)
> snprintf(priv->mdio->id, MII_BUS_ID_SIZE, "usb-%03d:%03d",
> dev->udev->bus->busnum, dev->udev->devnum);
>
> - return devm_mdiobus_register(&dev->udev->dev, priv->mdio);
> + ret = mdiobus_register(priv->mdio);
> + if (ret) {
> + netdev_err(dev->net, "Could not register MDIO bus (err %d)\n", ret);
> + mdiobus_free(priv->mdio);
> + priv->mdio = NULL;
> + }
> +
> + return ret;
> +}
> +
> +static void ax88772_mdio_unregister(struct asix_common_private *priv)
> +{
> + mdiobus_unregister(priv->mdio);
> + mdiobus_free(priv->mdio);
> }
>
> static int ax88772_init_phy(struct usbnet *dev)
> @@ -690,6 +704,7 @@ static int ax88772_init_phy(struct usbnet *dev)
> priv->phydev = mdiobus_get_phy(priv->mdio, priv->phy_addr);
> if (!priv->phydev) {
> netdev_err(dev->net, "Could not find PHY\n");
> + ax88772_mdio_unregister(priv);
> return -ENODEV;
> }
>
> @@ -896,16 +911,23 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
>
> ret = ax88772_init_mdio(dev);
> if (ret)
> - return ret;
> + goto mdio_err;
>
> ret = ax88772_phylink_setup(dev);
> if (ret)
> - return ret;
> + goto phylink_err;
>
> ret = ax88772_init_phy(dev);
> if (ret)
> - phylink_destroy(priv->phylink);
> + goto initphy_err;
>
> + return 0;
> +
> +initphy_err:
> + phylink_destroy(priv->phylink);
> +phylink_err:
> + ax88772_mdio_unregister(priv);
> +mdio_err:
> return ret;
> }
>
> @@ -926,6 +948,7 @@ static void ax88772_unbind(struct usbnet *dev, struct usb_interface *intf)
> phylink_disconnect_phy(priv->phylink);
> rtnl_unlock();
> phylink_destroy(priv->phylink);
> + ax88772_mdio_unregister(priv);
> asix_rx_fixup_common_free(dev->driver_priv);
> }
>
> --
> 2.40.0.rc1.284.g88254d51c5-goog
>
next prev parent reply other threads:[~2023-03-14 13:26 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-14 5:54 [PATCHv4 net] net: asix: fix modprobe "sysfs: cannot create duplicate filename" Grant Grundler
2023-03-14 13:22 ` Michal Swiatkowski [this message]
2023-03-16 5:08 ` Jakub Kicinski
2023-03-17 17:58 ` Grant Grundler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZBB1HR3ow/sGigFB@localhost.localdomain \
--to=michal.swiatkowski@linux.intel.com \
--cc=davem@davemloft.net \
--cc=eizan@chromium.org \
--cc=glance@acc.umu.se \
--cc=grundler@chromium.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@rempel-privat.de \
--cc=lukas@wunner.de \
--cc=netdev@vger.kernel.org \
--cc=paskripkin@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).