Re: [PATCH 3/7] dt-bindings: net: dsa: mediatek,mt7530: add port bindings for MT7988

[Daniel Golle <daniel@makrotopia.org>]

On Thu, Apr 06, 2023 at 11:01:37AM +0300, arinc9.unal@gmail.com wrote:
> From: Arınç ÜNAL <arinc.unal@arinc9.com>
> 
> The switch on MT7988 has got only port 6 as a CPU port. The only phy-mode
> to be used is internal. Add this.
> 
> Some bindings are incorrect for this switch now, so move them to more
> specific places.
> 
> Address the incorrect information of which ports can be used as a user
> port. Any port can be used as a user port.
> 
> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>

Acked-by: Daniel Golle <daniel@makrotopia.org>

> ---
>  .../bindings/net/dsa/mediatek,mt7530.yaml     | 63 ++++++++++++++-----
>  1 file changed, 46 insertions(+), 17 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
> index 7045a98d9593..605888ce2bc6 100644
> --- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
> +++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
> @@ -160,22 +160,6 @@ patternProperties:
>        "^(ethernet-)?port@[0-9]+$":
>          type: object
>  
> -        properties:
> -          reg:
> -            description:
> -              Port address described must be 5 or 6 for CPU port and from 0 to 5
> -              for user ports.
> -
> -        allOf:
> -          - if:
> -              required: [ ethernet ]
> -            then:
> -              properties:
> -                reg:
> -                  enum:
> -                    - 5
> -                    - 6
> -
>  required:
>    - compatible
>    - reg
> @@ -186,9 +170,21 @@ $defs:
>        "^(ethernet-)?ports$":
>          patternProperties:
>            "^(ethernet-)?port@[0-9]+$":
> +            properties:
> +              reg:
> +                description:
> +                  Port address described must be 5 or 6 for the CPU port. User
> +                  ports can be 0 to 6.
> +
>              if:
>                required: [ ethernet ]
>              then:
> +              properties:
> +                reg:
> +                  enum:
> +                    - 5
> +                    - 6
> +
>                if:
>                  properties:
>                    reg:
> @@ -212,9 +208,21 @@ $defs:
>        "^(ethernet-)?ports$":
>          patternProperties:
>            "^(ethernet-)?port@[0-9]+$":
> +            properties:
> +              reg:
> +                description:
> +                  Port address described must be 5 or 6 for the CPU port. User
> +                  ports can be 0 to 6.
> +
>              if:
>                required: [ ethernet ]
>              then:
> +              properties:
> +                reg:
> +                  enum:
> +                    - 5
> +                    - 6
> +
>                if:
>                  properties:
>                    reg:
> @@ -235,6 +243,27 @@ $defs:
>                        - 2500base-x
>                        - sgmii
>  
> +  mt7988-dsa-port:
> +    patternProperties:
> +      "^(ethernet-)?ports$":
> +        patternProperties:
> +          "^(ethernet-)?port@[0-9]+$":
> +            properties:
> +              reg:
> +                description:
> +                  Port address described must be 6 for the CPU port. User ports
> +                  can be 0 to 3, and 6.
> +
> +            if:
> +              required: [ ethernet ]
> +            then:
> +              properties:
> +                reg:
> +                  const: 6
> +
> +                phy-mode:
> +                  const: internal
> +
>  allOf:
>    - $ref: dsa.yaml#/$defs/ethernet-ports
>    - if:
> @@ -285,7 +314,7 @@ allOf:
>          compatible:
>            const: mediatek,mt7988-switch
>      then:
> -      $ref: "#/$defs/mt7530-dsa-port"
> +      $ref: "#/$defs/mt7988-dsa-port"
>        properties:
>          gpio-controller: false
>          mediatek,mcm: false
> -- 
> 2.37.2
>