[PATCH net-next 0/3] mlxsw: Use static trip points for transceiver modules

[PATCH net-next 0/3] mlxsw: Use static trip points for transceiver modules

[Petr Machata]

Ido Schimmel writes:

See patch #1 for motivation and implementation details.

Patches #2-#3 are simple cleanups as a result of the changes in the
first patch.

Ido Schimmel (3):
  mlxsw: core_thermal: Use static trip points for transceiver modules
  mlxsw: core_thermal: Make mlxsw_thermal_module_init() void
  mlxsw: core_thermal: Simplify transceiver module get_temp() callback

 .../ethernet/mellanox/mlxsw/core_thermal.c    | 165 ++++--------------
 1 file changed, 36 insertions(+), 129 deletions(-)

-- 
2.39.0

[PATCH net-next 1/3] mlxsw: core_thermal: Use static trip points for transceiver modules

[Petr Machata]

From: Ido Schimmel <idosch@nvidia.com>

The driver registers a thermal zone for each transceiver module and
tries to set the trip point temperatures according to the thresholds
read from the transceiver. If a threshold cannot be read or if a
transceiver is unplugged, the trip point temperature is set to zero,
which means that it is disabled as far as the thermal subsystem is
concerned.

A recent change in the thermal core made it so that such trip points are
no longer marked as disabled, which lead the thermal subsystem to
incorrectly set the associated cooling devices to the their maximum
state [1]. A fix to restore this behavior was merged in commit
f1b80a3878b2 ("thermal: core: Restore behavior regarding invalid trip
points"). However, the thermal maintainer suggested to not rely on this
behavior and instead always register a valid array of trip points [2].

Therefore, create a static array of trip points with sane defaults
(suggested by Vadim) and register it with the thermal zone of each
transceiver module. User space can choose to override these defaults
using the thermal zone sysfs interface since these files are writeable.

Before:

 $ cat /sys/class/thermal/thermal_zone11/type
 mlxsw-module11
 $ cat /sys/class/thermal/thermal_zone11/trip_point_*_temp
 65000
 75000
 80000

After:

 $ cat /sys/class/thermal/thermal_zone11/type
 mlxsw-module11
 $ cat /sys/class/thermal/thermal_zone11/trip_point_*_temp
 55000
 65000
 80000

Also tested by reverting commit f1b80a3878b2 ("thermal: core: Restore
behavior regarding invalid trip points") and making sure that the
associated cooling devices are not set to their maximum state.

[1] https://lore.kernel.org/linux-pm/ZA3CFNhU4AbtsP4G@shredder/
[2] https://lore.kernel.org/linux-pm/f78e6b70-a963-c0ca-a4b2-0d4c6aeef1fb@linaro.org/

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
---
 .../ethernet/mellanox/mlxsw/core_thermal.c    | 110 ++++--------------
 1 file changed, 25 insertions(+), 85 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
index 09ed6e5fa6c3..ece5075b7dbf 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
@@ -19,6 +19,9 @@
 #define MLXSW_THERMAL_ASIC_TEMP_NORM	75000	/* 75C */
 #define MLXSW_THERMAL_ASIC_TEMP_HIGH	85000	/* 85C */
 #define MLXSW_THERMAL_ASIC_TEMP_HOT	105000	/* 105C */
+#define MLXSW_THERMAL_MODULE_TEMP_NORM	55000	/* 55C */
+#define MLXSW_THERMAL_MODULE_TEMP_HIGH	65000	/* 65C */
+#define MLXSW_THERMAL_MODULE_TEMP_HOT	80000	/* 80C */
 #define MLXSW_THERMAL_HYSTERESIS_TEMP	5000	/* 5C */
 #define MLXSW_THERMAL_MODULE_TEMP_SHIFT	(MLXSW_THERMAL_HYSTERESIS_TEMP * 2)
 #define MLXSW_THERMAL_MAX_STATE	10
@@ -30,12 +33,6 @@ static char * const mlxsw_thermal_external_allowed_cdev[] = {
 	"mlxreg_fan",
 };
 
-enum mlxsw_thermal_trips {
-	MLXSW_THERMAL_TEMP_TRIP_NORM,
-	MLXSW_THERMAL_TEMP_TRIP_HIGH,
-	MLXSW_THERMAL_TEMP_TRIP_HOT,
-};
-
 struct mlxsw_cooling_states {
 	int	min_state;
 	int	max_state;
@@ -59,6 +56,24 @@ static const struct thermal_trip default_thermal_trips[] = {
 	},
 };
 
+static const struct thermal_trip default_thermal_module_trips[] = {
+	{	/* In range - 0-40% PWM */
+		.type		= THERMAL_TRIP_ACTIVE,
+		.temperature	= MLXSW_THERMAL_MODULE_TEMP_NORM,
+		.hysteresis	= MLXSW_THERMAL_HYSTERESIS_TEMP,
+	},
+	{
+		/* In range - 40-100% PWM */
+		.type		= THERMAL_TRIP_ACTIVE,
+		.temperature	= MLXSW_THERMAL_MODULE_TEMP_HIGH,
+		.hysteresis	= MLXSW_THERMAL_HYSTERESIS_TEMP,
+	},
+	{	/* Warning */
+		.type		= THERMAL_TRIP_HOT,
+		.temperature	= MLXSW_THERMAL_MODULE_TEMP_HOT,
+	},
+};
+
 static const struct mlxsw_cooling_states default_cooling_states[] = {
 	{
 		.min_state	= 0,
@@ -140,63 +155,6 @@ static int mlxsw_get_cooling_device_idx(struct mlxsw_thermal *thermal,
 	return -ENODEV;
 }
 
-static void
-mlxsw_thermal_module_trips_reset(struct mlxsw_thermal_module *tz)
-{
-	tz->trips[MLXSW_THERMAL_TEMP_TRIP_NORM].temperature = 0;
-	tz->trips[MLXSW_THERMAL_TEMP_TRIP_HIGH].temperature = 0;
-	tz->trips[MLXSW_THERMAL_TEMP_TRIP_HOT].temperature = 0;
-}
-
-static int
-mlxsw_thermal_module_trips_update(struct device *dev, struct mlxsw_core *core,
-				  struct mlxsw_thermal_module *tz,
-				  int crit_temp, int emerg_temp)
-{
-	int err;
-
-	/* Do not try to query temperature thresholds directly from the module's
-	 * EEPROM if we got valid thresholds from MTMP.
-	 */
-	if (!emerg_temp || !crit_temp) {
-		err = mlxsw_env_module_temp_thresholds_get(core, tz->slot_index,
-							   tz->module,
-							   SFP_TEMP_HIGH_WARN,
-							   &crit_temp);
-		if (err)
-			return err;
-
-		err = mlxsw_env_module_temp_thresholds_get(core, tz->slot_index,
-							   tz->module,
-							   SFP_TEMP_HIGH_ALARM,
-							   &emerg_temp);
-		if (err)
-			return err;
-	}
-
-	if (crit_temp > emerg_temp) {
-		dev_warn(dev, "%s : Critical threshold %d is above emergency threshold %d\n",
-			 tz->tzdev->type, crit_temp, emerg_temp);
-		return 0;
-	}
-
-	/* According to the system thermal requirements, the thermal zones are
-	 * defined with three trip points. The critical and emergency
-	 * temperature thresholds, provided by QSFP module are set as "active"
-	 * and "hot" trip points, "normal" trip point is derived from "active"
-	 * by subtracting double hysteresis value.
-	 */
-	if (crit_temp >= MLXSW_THERMAL_MODULE_TEMP_SHIFT)
-		tz->trips[MLXSW_THERMAL_TEMP_TRIP_NORM].temperature = crit_temp -
-					MLXSW_THERMAL_MODULE_TEMP_SHIFT;
-	else
-		tz->trips[MLXSW_THERMAL_TEMP_TRIP_NORM].temperature = crit_temp;
-	tz->trips[MLXSW_THERMAL_TEMP_TRIP_HIGH].temperature = crit_temp;
-	tz->trips[MLXSW_THERMAL_TEMP_TRIP_HOT].temperature = emerg_temp;
-
-	return 0;
-}
-
 static int mlxsw_thermal_bind(struct thermal_zone_device *tzdev,
 			      struct thermal_cooling_device *cdev)
 {
@@ -358,10 +316,8 @@ static int mlxsw_thermal_module_temp_get(struct thermal_zone_device *tzdev,
 	struct mlxsw_thermal_module *tz = tzdev->devdata;
 	struct mlxsw_thermal *thermal = tz->parent;
 	int temp, crit_temp, emerg_temp;
-	struct device *dev;
 	u16 sensor_index;
 
-	dev = thermal->bus_info->dev;
 	sensor_index = MLXSW_REG_MTMP_MODULE_INDEX_MIN + tz->module;
 
 	/* Read module temperature and thresholds. */
@@ -371,13 +327,6 @@ static int mlxsw_thermal_module_temp_get(struct thermal_zone_device *tzdev,
 						     &crit_temp, &emerg_temp);
 	*p_temp = temp;
 
-	if (!temp)
-		return 0;
-
-	/* Update trip points. */
-	mlxsw_thermal_module_trips_update(dev, thermal->core, tz,
-					  crit_temp, emerg_temp);
-
 	return 0;
 }
 
@@ -527,10 +476,7 @@ mlxsw_thermal_module_init(struct device *dev, struct mlxsw_core *core,
 			  struct mlxsw_thermal_area *area, u8 module)
 {
 	struct mlxsw_thermal_module *module_tz;
-	int dummy_temp, crit_temp, emerg_temp;
-	u16 sensor_index;
 
-	sensor_index = MLXSW_REG_MTMP_MODULE_INDEX_MIN + module;
 	module_tz = &area->tz_module_arr[module];
 	/* Skip if parent is already set (case of port split). */
 	if (module_tz->parent)
@@ -538,19 +484,13 @@ mlxsw_thermal_module_init(struct device *dev, struct mlxsw_core *core,
 	module_tz->module = module;
 	module_tz->slot_index = area->slot_index;
 	module_tz->parent = thermal;
-	memcpy(module_tz->trips, default_thermal_trips,
+	BUILD_BUG_ON(ARRAY_SIZE(default_thermal_module_trips) !=
+		     MLXSW_THERMAL_NUM_TRIPS);
+	memcpy(module_tz->trips, default_thermal_module_trips,
 	       sizeof(thermal->trips));
 	memcpy(module_tz->cooling_states, default_cooling_states,
 	       sizeof(thermal->cooling_states));
-	/* Initialize all trip point. */
-	mlxsw_thermal_module_trips_reset(module_tz);
-	/* Read module temperature and thresholds. */
-	mlxsw_thermal_module_temp_and_thresholds_get(core, area->slot_index,
-						     sensor_index, &dummy_temp,
-						     &crit_temp, &emerg_temp);
-	/* Update trip point according to the module data. */
-	return mlxsw_thermal_module_trips_update(dev, core, module_tz,
-						 crit_temp, emerg_temp);
+	return 0;
 }
 
 static void mlxsw_thermal_module_fini(struct mlxsw_thermal_module *module_tz)
-- 
2.39.0

Re: [PATCH net-next 1/3] mlxsw: core_thermal: Use static trip points for transceiver modules

[Daniel Lezcano]

On 31/03/2023 16:17, Petr Machata wrote:
> From: Ido Schimmel <idosch@nvidia.com>
> 
> The driver registers a thermal zone for each transceiver module and
> tries to set the trip point temperatures according to the thresholds
> read from the transceiver. If a threshold cannot be read or if a
> transceiver is unplugged, the trip point temperature is set to zero,
> which means that it is disabled as far as the thermal subsystem is
> concerned.
> 
> A recent change in the thermal core made it so that such trip points are
> no longer marked as disabled, which lead the thermal subsystem to
> incorrectly set the associated cooling devices to the their maximum
> state [1]. A fix to restore this behavior was merged in commit
> f1b80a3878b2 ("thermal: core: Restore behavior regarding invalid trip
> points"). However, the thermal maintainer suggested to not rely on this
> behavior and instead always register a valid array of trip points [2].
> 
> Therefore, create a static array of trip points with sane defaults
> (suggested by Vadim) and register it with the thermal zone of each
> transceiver module. User space can choose to override these defaults
> using the thermal zone sysfs interface since these files are writeable.
> 
> Before:
> 
>   $ cat /sys/class/thermal/thermal_zone11/type
>   mlxsw-module11
>   $ cat /sys/class/thermal/thermal_zone11/trip_point_*_temp
>   65000
>   75000
>   80000
> 
> After:
> 
>   $ cat /sys/class/thermal/thermal_zone11/type
>   mlxsw-module11
>   $ cat /sys/class/thermal/thermal_zone11/trip_point_*_temp
>   55000
>   65000
>   80000
> 
> Also tested by reverting commit f1b80a3878b2 ("thermal: core: Restore
> behavior regarding invalid trip points") and making sure that the
> associated cooling devices are not set to their maximum state.
> 
> [1] https://lore.kernel.org/linux-pm/ZA3CFNhU4AbtsP4G@shredder/
> [2] https://lore.kernel.org/linux-pm/f78e6b70-a963-c0ca-a4b2-0d4c6aeef1fb@linaro.org/
> 
> Signed-off-by: Ido Schimmel <idosch@nvidia.com>
> Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
> Signed-off-by: Petr Machata <petrm@nvidia.com>
> ---

Sounds like the changes result in a nice cleanup :)

Thanks for taking care of doing these changes

   -- Daniel

>   .../ethernet/mellanox/mlxsw/core_thermal.c    | 110 ++++--------------
>   1 file changed, 25 insertions(+), 85 deletions(-)
> 
> diff --git a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
> index 09ed6e5fa6c3..ece5075b7dbf 100644
> --- a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
> +++ b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
> @@ -19,6 +19,9 @@
>   #define MLXSW_THERMAL_ASIC_TEMP_NORM	75000	/* 75C */
>   #define MLXSW_THERMAL_ASIC_TEMP_HIGH	85000	/* 85C */
>   #define MLXSW_THERMAL_ASIC_TEMP_HOT	105000	/* 105C */
> +#define MLXSW_THERMAL_MODULE_TEMP_NORM	55000	/* 55C */
> +#define MLXSW_THERMAL_MODULE_TEMP_HIGH	65000	/* 65C */
> +#define MLXSW_THERMAL_MODULE_TEMP_HOT	80000	/* 80C */
>   #define MLXSW_THERMAL_HYSTERESIS_TEMP	5000	/* 5C */
>   #define MLXSW_THERMAL_MODULE_TEMP_SHIFT	(MLXSW_THERMAL_HYSTERESIS_TEMP * 2)
>   #define MLXSW_THERMAL_MAX_STATE	10
> @@ -30,12 +33,6 @@ static char * const mlxsw_thermal_external_allowed_cdev[] = {
>   	"mlxreg_fan",
>   };
>   
> -enum mlxsw_thermal_trips {
> -	MLXSW_THERMAL_TEMP_TRIP_NORM,
> -	MLXSW_THERMAL_TEMP_TRIP_HIGH,
> -	MLXSW_THERMAL_TEMP_TRIP_HOT,
> -};
> -
>   struct mlxsw_cooling_states {
>   	int	min_state;
>   	int	max_state;
> @@ -59,6 +56,24 @@ static const struct thermal_trip default_thermal_trips[] = {
>   	},
>   };
>   
> +static const struct thermal_trip default_thermal_module_trips[] = {
> +	{	/* In range - 0-40% PWM */
> +		.type		= THERMAL_TRIP_ACTIVE,
> +		.temperature	= MLXSW_THERMAL_MODULE_TEMP_NORM,
> +		.hysteresis	= MLXSW_THERMAL_HYSTERESIS_TEMP,
> +	},
> +	{
> +		/* In range - 40-100% PWM */
> +		.type		= THERMAL_TRIP_ACTIVE,
> +		.temperature	= MLXSW_THERMAL_MODULE_TEMP_HIGH,
> +		.hysteresis	= MLXSW_THERMAL_HYSTERESIS_TEMP,
> +	},
> +	{	/* Warning */
> +		.type		= THERMAL_TRIP_HOT,
> +		.temperature	= MLXSW_THERMAL_MODULE_TEMP_HOT,
> +	},
> +};
> +
>   static const struct mlxsw_cooling_states default_cooling_states[] = {
>   	{
>   		.min_state	= 0,
> @@ -140,63 +155,6 @@ static int mlxsw_get_cooling_device_idx(struct mlxsw_thermal *thermal,
>   	return -ENODEV;
>   }
>   
> -static void
> -mlxsw_thermal_module_trips_reset(struct mlxsw_thermal_module *tz)
> -{
> -	tz->trips[MLXSW_THERMAL_TEMP_TRIP_NORM].temperature = 0;
> -	tz->trips[MLXSW_THERMAL_TEMP_TRIP_HIGH].temperature = 0;
> -	tz->trips[MLXSW_THERMAL_TEMP_TRIP_HOT].temperature = 0;
> -}
> -
> -static int
> -mlxsw_thermal_module_trips_update(struct device *dev, struct mlxsw_core *core,
> -				  struct mlxsw_thermal_module *tz,
> -				  int crit_temp, int emerg_temp)
> -{
> -	int err;
> -
> -	/* Do not try to query temperature thresholds directly from the module's
> -	 * EEPROM if we got valid thresholds from MTMP.
> -	 */
> -	if (!emerg_temp || !crit_temp) {
> -		err = mlxsw_env_module_temp_thresholds_get(core, tz->slot_index,
> -							   tz->module,
> -							   SFP_TEMP_HIGH_WARN,
> -							   &crit_temp);
> -		if (err)
> -			return err;
> -
> -		err = mlxsw_env_module_temp_thresholds_get(core, tz->slot_index,
> -							   tz->module,
> -							   SFP_TEMP_HIGH_ALARM,
> -							   &emerg_temp);
> -		if (err)
> -			return err;
> -	}
> -
> -	if (crit_temp > emerg_temp) {
> -		dev_warn(dev, "%s : Critical threshold %d is above emergency threshold %d\n",
> -			 tz->tzdev->type, crit_temp, emerg_temp);
> -		return 0;
> -	}
> -
> -	/* According to the system thermal requirements, the thermal zones are
> -	 * defined with three trip points. The critical and emergency
> -	 * temperature thresholds, provided by QSFP module are set as "active"
> -	 * and "hot" trip points, "normal" trip point is derived from "active"
> -	 * by subtracting double hysteresis value.
> -	 */
> -	if (crit_temp >= MLXSW_THERMAL_MODULE_TEMP_SHIFT)
> -		tz->trips[MLXSW_THERMAL_TEMP_TRIP_NORM].temperature = crit_temp -
> -					MLXSW_THERMAL_MODULE_TEMP_SHIFT;
> -	else
> -		tz->trips[MLXSW_THERMAL_TEMP_TRIP_NORM].temperature = crit_temp;
> -	tz->trips[MLXSW_THERMAL_TEMP_TRIP_HIGH].temperature = crit_temp;
> -	tz->trips[MLXSW_THERMAL_TEMP_TRIP_HOT].temperature = emerg_temp;
> -
> -	return 0;
> -}
> -
>   static int mlxsw_thermal_bind(struct thermal_zone_device *tzdev,
>   			      struct thermal_cooling_device *cdev)
>   {
> @@ -358,10 +316,8 @@ static int mlxsw_thermal_module_temp_get(struct thermal_zone_device *tzdev,
>   	struct mlxsw_thermal_module *tz = tzdev->devdata;
>   	struct mlxsw_thermal *thermal = tz->parent;
>   	int temp, crit_temp, emerg_temp;
> -	struct device *dev;
>   	u16 sensor_index;
>   
> -	dev = thermal->bus_info->dev;
>   	sensor_index = MLXSW_REG_MTMP_MODULE_INDEX_MIN + tz->module;
>   
>   	/* Read module temperature and thresholds. */
> @@ -371,13 +327,6 @@ static int mlxsw_thermal_module_temp_get(struct thermal_zone_device *tzdev,
>   						     &crit_temp, &emerg_temp);
>   	*p_temp = temp;
>   
> -	if (!temp)
> -		return 0;
> -
> -	/* Update trip points. */
> -	mlxsw_thermal_module_trips_update(dev, thermal->core, tz,
> -					  crit_temp, emerg_temp);
> -
>   	return 0;
>   }
>   
> @@ -527,10 +476,7 @@ mlxsw_thermal_module_init(struct device *dev, struct mlxsw_core *core,
>   			  struct mlxsw_thermal_area *area, u8 module)
>   {
>   	struct mlxsw_thermal_module *module_tz;
> -	int dummy_temp, crit_temp, emerg_temp;
> -	u16 sensor_index;
>   
> -	sensor_index = MLXSW_REG_MTMP_MODULE_INDEX_MIN + module;
>   	module_tz = &area->tz_module_arr[module];
>   	/* Skip if parent is already set (case of port split). */
>   	if (module_tz->parent)
> @@ -538,19 +484,13 @@ mlxsw_thermal_module_init(struct device *dev, struct mlxsw_core *core,
>   	module_tz->module = module;
>   	module_tz->slot_index = area->slot_index;
>   	module_tz->parent = thermal;
> -	memcpy(module_tz->trips, default_thermal_trips,
> +	BUILD_BUG_ON(ARRAY_SIZE(default_thermal_module_trips) !=
> +		     MLXSW_THERMAL_NUM_TRIPS);
> +	memcpy(module_tz->trips, default_thermal_module_trips,
>   	       sizeof(thermal->trips));
>   	memcpy(module_tz->cooling_states, default_cooling_states,
>   	       sizeof(thermal->cooling_states));
> -	/* Initialize all trip point. */
> -	mlxsw_thermal_module_trips_reset(module_tz);
> -	/* Read module temperature and thresholds. */
> -	mlxsw_thermal_module_temp_and_thresholds_get(core, area->slot_index,
> -						     sensor_index, &dummy_temp,
> -						     &crit_temp, &emerg_temp);
> -	/* Update trip point according to the module data. */
> -	return mlxsw_thermal_module_trips_update(dev, core, module_tz,
> -						 crit_temp, emerg_temp);
> +	return 0;
>   }
>   
>   static void mlxsw_thermal_module_fini(struct mlxsw_thermal_module *module_tz)

-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

Re: [PATCH net-next 1/3] mlxsw: core_thermal: Use static trip points for transceiver modules

[Simon Horman]

On Fri, Mar 31, 2023 at 04:17:30PM +0200, Petr Machata wrote:
> From: Ido Schimmel <idosch@nvidia.com>
> 
> The driver registers a thermal zone for each transceiver module and
> tries to set the trip point temperatures according to the thresholds
> read from the transceiver. If a threshold cannot be read or if a
> transceiver is unplugged, the trip point temperature is set to zero,
> which means that it is disabled as far as the thermal subsystem is
> concerned.
> 
> A recent change in the thermal core made it so that such trip points are
> no longer marked as disabled, which lead the thermal subsystem to
> incorrectly set the associated cooling devices to the their maximum
> state [1]. A fix to restore this behavior was merged in commit
> f1b80a3878b2 ("thermal: core: Restore behavior regarding invalid trip
> points"). However, the thermal maintainer suggested to not rely on this
> behavior and instead always register a valid array of trip points [2].
> 
> Therefore, create a static array of trip points with sane defaults
> (suggested by Vadim) and register it with the thermal zone of each
> transceiver module. User space can choose to override these defaults
> using the thermal zone sysfs interface since these files are writeable.
> 
> Before:
> 
>  $ cat /sys/class/thermal/thermal_zone11/type
>  mlxsw-module11
>  $ cat /sys/class/thermal/thermal_zone11/trip_point_*_temp
>  65000
>  75000
>  80000
> 
> After:
> 
>  $ cat /sys/class/thermal/thermal_zone11/type
>  mlxsw-module11
>  $ cat /sys/class/thermal/thermal_zone11/trip_point_*_temp
>  55000
>  65000
>  80000
> 
> Also tested by reverting commit f1b80a3878b2 ("thermal: core: Restore
> behavior regarding invalid trip points") and making sure that the
> associated cooling devices are not set to their maximum state.
> 
> [1] https://lore.kernel.org/linux-pm/ZA3CFNhU4AbtsP4G@shredder/
> [2] https://lore.kernel.org/linux-pm/f78e6b70-a963-c0ca-a4b2-0d4c6aeef1fb@linaro.org/
> 
> Signed-off-by: Ido Schimmel <idosch@nvidia.com>
> Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
> Signed-off-by: Petr Machata <petrm@nvidia.com>

Reviewed-by: Simon Horman <simon.horman@corigine.com>

[PATCH net-next 2/3] mlxsw: core_thermal: Make mlxsw_thermal_module_init() void

[Petr Machata]

From: Ido Schimmel <idosch@nvidia.com>

The function can no longer fail so make it void and remove the
associated error path.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
---
 drivers/net/ethernet/mellanox/mlxsw/core_thermal.c | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
index ece5075b7dbf..f0c5a2c59075 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
@@ -470,7 +470,7 @@ static void mlxsw_thermal_module_tz_fini(struct thermal_zone_device *tzdev)
 	thermal_zone_device_unregister(tzdev);
 }
 
-static int
+static void
 mlxsw_thermal_module_init(struct device *dev, struct mlxsw_core *core,
 			  struct mlxsw_thermal *thermal,
 			  struct mlxsw_thermal_area *area, u8 module)
@@ -480,7 +480,7 @@ mlxsw_thermal_module_init(struct device *dev, struct mlxsw_core *core,
 	module_tz = &area->tz_module_arr[module];
 	/* Skip if parent is already set (case of port split). */
 	if (module_tz->parent)
-		return 0;
+		return;
 	module_tz->module = module;
 	module_tz->slot_index = area->slot_index;
 	module_tz->parent = thermal;
@@ -490,7 +490,6 @@ mlxsw_thermal_module_init(struct device *dev, struct mlxsw_core *core,
 	       sizeof(thermal->trips));
 	memcpy(module_tz->cooling_states, default_cooling_states,
 	       sizeof(thermal->cooling_states));
-	return 0;
 }
 
 static void mlxsw_thermal_module_fini(struct mlxsw_thermal_module *module_tz)
@@ -529,11 +528,8 @@ mlxsw_thermal_modules_init(struct device *dev, struct mlxsw_core *core,
 	if (!area->tz_module_arr)
 		return -ENOMEM;
 
-	for (i = 0; i < area->tz_module_num; i++) {
-		err = mlxsw_thermal_module_init(dev, core, thermal, area, i);
-		if (err)
-			goto err_thermal_module_init;
-	}
+	for (i = 0; i < area->tz_module_num; i++)
+		mlxsw_thermal_module_init(dev, core, thermal, area, i);
 
 	for (i = 0; i < area->tz_module_num; i++) {
 		module_tz = &area->tz_module_arr[i];
@@ -547,7 +543,6 @@ mlxsw_thermal_modules_init(struct device *dev, struct mlxsw_core *core,
 	return 0;
 
 err_thermal_module_tz_init:
-err_thermal_module_init:
 	for (i = area->tz_module_num - 1; i >= 0; i--)
 		mlxsw_thermal_module_fini(&area->tz_module_arr[i]);
 	kfree(area->tz_module_arr);
-- 
2.39.0

Re: [PATCH net-next 2/3] mlxsw: core_thermal: Make mlxsw_thermal_module_init() void

[Simon Horman]

On Fri, Mar 31, 2023 at 04:17:31PM +0200, Petr Machata wrote:
> From: Ido Schimmel <idosch@nvidia.com>
> 
> The function can no longer fail so make it void and remove the
> associated error path.
> 
> Signed-off-by: Ido Schimmel <idosch@nvidia.com>
> Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
> Signed-off-by: Petr Machata <petrm@nvidia.com>

Reviewed-by: Simon Horman <simon.horman@corigine.com>

[PATCH net-next 3/3] mlxsw: core_thermal: Simplify transceiver module get_temp() callback

[Petr Machata]

From: Ido Schimmel <idosch@nvidia.com>

The get_temp() callback of a thermal zone associated with a transceiver
module no longer needs to read the temperature thresholds of the module.
Therefore, simplify the callback by only reading the temperature.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
---
 .../ethernet/mellanox/mlxsw/core_thermal.c    | 44 ++++---------------
 1 file changed, 8 insertions(+), 36 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
index f0c5a2c59075..deac4bced98c 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
@@ -283,50 +283,22 @@ static int mlxsw_thermal_module_unbind(struct thermal_zone_device *tzdev,
 	return err;
 }
 
-static void
-mlxsw_thermal_module_temp_and_thresholds_get(struct mlxsw_core *core,
-					     u8 slot_index, u16 sensor_index,
-					     int *p_temp, int *p_crit_temp,
-					     int *p_emerg_temp)
-{
-	char mtmp_pl[MLXSW_REG_MTMP_LEN];
-	int err;
-
-	/* Read module temperature and thresholds. */
-	mlxsw_reg_mtmp_pack(mtmp_pl, slot_index, sensor_index,
-			    false, false);
-	err = mlxsw_reg_query(core, MLXSW_REG(mtmp), mtmp_pl);
-	if (err) {
-		/* Set temperature and thresholds to zero to avoid passing
-		 * uninitialized data back to the caller.
-		 */
-		*p_temp = 0;
-		*p_crit_temp = 0;
-		*p_emerg_temp = 0;
-
-		return;
-	}
-	mlxsw_reg_mtmp_unpack(mtmp_pl, p_temp, NULL, p_crit_temp, p_emerg_temp,
-			      NULL);
-}
-
 static int mlxsw_thermal_module_temp_get(struct thermal_zone_device *tzdev,
 					 int *p_temp)
 {
 	struct mlxsw_thermal_module *tz = tzdev->devdata;
 	struct mlxsw_thermal *thermal = tz->parent;
-	int temp, crit_temp, emerg_temp;
+	char mtmp_pl[MLXSW_REG_MTMP_LEN];
 	u16 sensor_index;
+	int err;
 
 	sensor_index = MLXSW_REG_MTMP_MODULE_INDEX_MIN + tz->module;
-
-	/* Read module temperature and thresholds. */
-	mlxsw_thermal_module_temp_and_thresholds_get(thermal->core,
-						     tz->slot_index,
-						     sensor_index, &temp,
-						     &crit_temp, &emerg_temp);
-	*p_temp = temp;
-
+	mlxsw_reg_mtmp_pack(mtmp_pl, tz->slot_index, sensor_index,
+			    false, false);
+	err = mlxsw_reg_query(thermal->core, MLXSW_REG(mtmp), mtmp_pl);
+	if (err)
+		return err;
+	mlxsw_reg_mtmp_unpack(mtmp_pl, p_temp, NULL, NULL, NULL, NULL);
 	return 0;
 }
 
-- 
2.39.0

Re: [PATCH net-next 3/3] mlxsw: core_thermal: Simplify transceiver module get_temp() callback

[Simon Horman]

On Fri, Mar 31, 2023 at 04:17:32PM +0200, Petr Machata wrote:
> From: Ido Schimmel <idosch@nvidia.com>
> 
> The get_temp() callback of a thermal zone associated with a transceiver
> module no longer needs to read the temperature thresholds of the module.
> Therefore, simplify the callback by only reading the temperature.
> 
> Signed-off-by: Ido Schimmel <idosch@nvidia.com>
> Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
> Signed-off-by: Petr Machata <petrm@nvidia.com>

Reviewed-by: Simon Horman <simon.horman@corigine.com>

Re: [PATCH net-next 0/3] mlxsw: Use static trip points for transceiver modules

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net-next.git (main)
by David S. Miller <davem@davemloft.net>:

On Fri, 31 Mar 2023 16:17:29 +0200 you wrote:
> Ido Schimmel writes:
> 
> See patch #1 for motivation and implementation details.
> 
> Patches #2-#3 are simple cleanups as a result of the changes in the
> first patch.
> 
> [...]

Here is the summary with links:
  - [net-next,1/3] mlxsw: core_thermal: Use static trip points for transceiver modules
    https://git.kernel.org/netdev/net-next/c/5601ef91fba8
  - [net-next,2/3] mlxsw: core_thermal: Make mlxsw_thermal_module_init() void
    https://git.kernel.org/netdev/net-next/c/c1536d856e18
  - [net-next,3/3] mlxsw: core_thermal: Simplify transceiver module get_temp() callback
    https://git.kernel.org/netdev/net-next/c/cc19439f703b

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html