[PATCH] net: sfp: add qurik enabling 2500Base-x for HG MXPD-483II

[PATCH] net: sfp: add qurik enabling 2500Base-x for HG MXPD-483II

[Daniel Golle]

The HG MXPD-483II 1310nm SFP module is meant to operate with 2500Base-X,
however, in their EEPROM they incorrectly specify:
    Transceiver type                          : Ethernet: 1000BASE-LX
    ...
    BR, Nominal                               : 2600MBd

Use sfp_quirk_2500basex for this module to allow 2500Base-X mode anyway.

https://forum.banana-pi.org/t/bpi-r3-sfp-module-compatibility/14573/60

Reported-by: chowtom <chowtom@gmail.com>
Tested-by: chowtom <chowtom@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
 drivers/net/phy/sfp.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index f0fcb06fbe829..5e515165ceab7 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -406,6 +406,10 @@ static const struct sfp_quirk sfp_quirks[] = {
 
 	SFP_QUIRK_F("HALNy", "HL-GSFP", sfp_fixup_halny_gsfp),
 
+	// HG MXPD-483II-F 2.5G supports 2500Base-X, but incorrectly reports
+	// 2600MBd in their EERPOM
+	SFP_QUIRK_M("HG GENUINE", "MXPD-483II", sfp_quirk_2500basex),
+
 	// Huawei MA5671A can operate at 2500base-X, but report 1.2GBd NRZ in
 	// their EEPROM
 	SFP_QUIRK("HUAWEI", "MA5671A", sfp_quirk_2500basex,

base-commit: d74aab2ca19842d16815a97d4dd605deaae73c69
-- 
2.40.0

Re: [PATCH] net: sfp: add qurik enabling 2500Base-x for HG MXPD-483II

[Russell King (Oracle)]

On Sun, Apr 02, 2023 at 12:44:37PM +0100, Daniel Golle wrote:
> The HG MXPD-483II 1310nm SFP module is meant to operate with 2500Base-X,
> however, in their EEPROM they incorrectly specify:
>     Transceiver type                          : Ethernet: 1000BASE-LX
>     ...
>     BR, Nominal                               : 2600MBd
> 
> Use sfp_quirk_2500basex for this module to allow 2500Base-X mode anyway.
> 
> https://forum.banana-pi.org/t/bpi-r3-sfp-module-compatibility/14573/60

Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

Please could you also arrange for the reporter to capture the ethtool
information via:

	ethtool -m ethX raw on > sfp-name.bin

and send me the binary file?

Thanks!

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!

Aw: [PATCH] net: sfp: add qurik enabling 2500Base-x for HG MXPD-483II

[Frank Wunderlich]

> Gesendet: Sonntag, 02. April 2023 um 13:44 Uhr
> Von: "Daniel Golle" <daniel@makrotopia.org>
> Betreff: [PATCH] net: sfp: add qurik enabling 2500Base-x for HG MXPD-483II

just noted a small typo...s/qurik/quirk/

regards Frank

Re: [PATCH] net: sfp: add qurik enabling 2500Base-x for HG MXPD-483II

[patchwork-bot+netdevbpf]

Hello:

This patch was applied to netdev/net.git (main)
by David S. Miller <davem@davemloft.net>:

On Sun, 2 Apr 2023 12:44:37 +0100 you wrote:
> The HG MXPD-483II 1310nm SFP module is meant to operate with 2500Base-X,
> however, in their EEPROM they incorrectly specify:
>     Transceiver type                          : Ethernet: 1000BASE-LX
>     ...
>     BR, Nominal                               : 2600MBd
> 
> Use sfp_quirk_2500basex for this module to allow 2500Base-X mode anyway.
> 
> [...]

Here is the summary with links:
  - net: sfp: add qurik enabling 2500Base-x for HG MXPD-483II
    https://git.kernel.org/netdev/net/c/ad651d68cee7

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html