netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Russell King (Oracle)" <linux@armlinux.org.uk>
To: Siddharth Vadapalli <s-vadapalli@ti.com>
Cc: davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
	pabeni@redhat.com, rogerq@kernel.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, srk@ti.com
Subject: Re: [PATCH net-next v2 1/3] net: ethernet: ti: am65-cpsw: Move mode specific config to mac_config()
Date: Mon, 3 Apr 2023 12:08:43 +0100	[thread overview]
Message-ID: <ZCqzuwDLGuBDMHQG@shell.armlinux.org.uk> (raw)
In-Reply-To: <20230403110106.983994-2-s-vadapalli@ti.com>

On Mon, Apr 03, 2023 at 04:31:04PM +0530, Siddharth Vadapalli wrote:
> Move the interface mode specific configuration to the mac_config()
> callback am65_cpsw_nuss_mac_config().
> 
> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
> ---
>  drivers/net/ethernet/ti/am65-cpsw-nuss.c | 10 +++++++---
>  1 file changed, 7 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/net/ethernet/ti/am65-cpsw-nuss.c b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
> index d17757ecbf42..74e099828978 100644
> --- a/drivers/net/ethernet/ti/am65-cpsw-nuss.c
> +++ b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
> @@ -1504,12 +1504,17 @@ static void am65_cpsw_nuss_mac_config(struct phylink_config *config, unsigned in
>  							  phylink_config);
>  	struct am65_cpsw_port *port = container_of(slave, struct am65_cpsw_port, slave);
>  	struct am65_cpsw_common *common = port->common;
> +	u32 mac_control = 0;
>  
>  	if (common->pdata.extra_modes & BIT(state->interface)) {
> -		if (state->interface == PHY_INTERFACE_MODE_SGMII)
> +		if (state->interface == PHY_INTERFACE_MODE_SGMII) {
> +			mac_control |= CPSW_SL_CTL_EXT_EN;
>  			writel(ADVERTISE_SGMII,
>  			       port->sgmii_base + AM65_CPSW_SGMII_MR_ADV_ABILITY_REG);
> +		}
>  
> +		if (mac_control)
> +			cpsw_sl_ctl_set(port->slave.mac_sl, mac_control);
>  		writel(AM65_CPSW_SGMII_CONTROL_MR_AN_ENABLE,
>  		       port->sgmii_base + AM65_CPSW_SGMII_CONTROL_REG);
>  	}
> @@ -1553,8 +1558,7 @@ static void am65_cpsw_nuss_mac_link_up(struct phylink_config *config, struct phy
>  
>  	if (speed == SPEED_1000)
>  		mac_control |= CPSW_SL_CTL_GIG;
> -	if (interface == PHY_INTERFACE_MODE_SGMII)
> -		mac_control |= CPSW_SL_CTL_EXT_EN;
> +	/* TODO: Verify whether in-band is necessary for 10 Mbps RGMII */
>  	if (speed == SPEED_10 && phy_interface_mode_is_rgmii(interface))
>  		/* Can be used with in band mode only */
>  		mac_control |= CPSW_SL_CTL_EXT_EN;

I'm afraid I can see you haven't thought this patch through properly.

am65_cpsw_nuss_mac_link_down() will call
cpsw_sl_ctl_reset(port->slave.mac_sl); which has the effect of clearing
to zero the entire MAC control register. This will clear
CPSW_SL_CTL_EXT_EN that was set in am65_cpsw_nuss_mac_config() which is
not what you want to be doing.

Given that we have the 10Mbps issue with RGMII, I think what you want
to be doing is:

1. Set CPSW_SL_CTL_EXT_EN in am65_cpsw_nuss_mac_config() if in SGMII
   mode, otherwise clear this bit.

2. Clear the mac_control register in am65_cpsw_nuss_mac_link_down()
   if in RMGII mode, otherwise preserve the state of
   CPSW_SL_CTL_EXT_EN but clear all other bits.

3. Set CPSW_SL_CTL_EXT_EN in am65_cpsw_nuss_mac_link_up() if in
   RGMII mode and 10Mbps.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!

  reply	other threads:[~2023-04-03 11:08 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-03 11:01 [PATCH net-next v2 0/3] Add support for J784S4 CPSW9G Siddharth Vadapalli
2023-04-03 11:01 ` [PATCH net-next v2 1/3] net: ethernet: ti: am65-cpsw: Move mode specific config to mac_config() Siddharth Vadapalli
2023-04-03 11:08   ` Russell King (Oracle) [this message]
2023-04-03 11:17     ` Siddharth Vadapalli
2023-04-03 13:01     ` Siddharth Vadapalli
2023-04-03 13:13       ` Russell King (Oracle)
2023-04-03 13:50         ` Siddharth Vadapalli
2023-04-03 13:55           ` Russell King (Oracle)
2023-04-03 14:08             ` Siddharth Vadapalli
2023-04-03 11:01 ` [PATCH net-next v2 2/3] net: ethernet: ti: am65-cpsw: Enable QSGMII for J784S4 CPSW9G Siddharth Vadapalli
2023-04-03 11:01 ` [PATCH net-next v2 3/3] net: ethernet: ti: am65-cpsw: Enable USXGMII mode " Siddharth Vadapalli
2023-04-03 11:10   ` Russell King (Oracle)
2023-04-03 11:18     ` Siddharth Vadapalli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZCqzuwDLGuBDMHQG@shell.armlinux.org.uk \
    --to=linux@armlinux.org.uk \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=rogerq@kernel.org \
    --cc=s-vadapalli@ti.com \
    --cc=srk@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).