Re: [net-next Patch v9 0/6] octeontx2-pf: HTB offload support

[Simon Horman <simon.horman@corigine.com>]

On Tue, Apr 11, 2023 at 02:33:53PM +0530, Hariprasad Kelam wrote:
> octeontx2 silicon and CN10K transmit interface consists of five
> transmit levels starting from MDQ, TL4 to TL1. Once packets are
> submitted to MDQ, hardware picks all active MDQs using strict
> priority, and MDQs having the same priority level are chosen using
> round robin. Each packet will traverse MDQ, TL4 to TL1 levels.
> Each level contains an array of queues to support scheduling and
> shaping.
> 
> As HTB supports classful queuing mechanism by supporting rate and
> ceil and allow the user to control the absolute bandwidth to
> particular classes of traffic the same can be achieved by
> configuring shapers and schedulers on different transmit levels.
> 
> This series of patches adds support for HTB offload,
> 
> Patch1: Allow strict priority parameter in HTB offload mode.
> 
> Patch2: Rename existing total tx queues for better readability
> 
> Patch3: defines APIs such that the driver can dynamically initialize/
>         deinitialize the send queues.
> 
> Patch4: Refactors transmit alloc/free calls as preparation for QOS
>         offload code.
> 
> Patch5: Adds actual HTB offload support.
> 
> Patch6: Add documentation about htb offload flow in driver
> 
> Hariprasad Kelam (3):
>   octeontx2-pf: Rename tot_tx_queues to non_qos_queues
>   octeontx2-pf: Refactor schedular queue alloc/free calls
>   docs: octeontx2: Add Documentation for QOS
> 
> Naveen Mamindlapalli (2):
>   sch_htb: Allow HTB priority parameter in offload mode
>   octeontx2-pf: Add support for HTB offload
> 
> Subbaraya Sundeep (1):
>   octeontx2-pf: qos send queues management
> -----
> v1 -> v2 :
>           ensure other drivers won't affect by allowing 'prio'
>           a parameter in htb offload mode.
> 
> v2 -> v3 :
>           1. discard patch supporting devlink to configure TL1 round
>              robin priority
>           2. replace NL_SET_ERR_MSG with NL_SET_ERR_MSG_MOD
>           3. use max3 instead of using max couple of times and use a better
>              naming convention in send queue management code.
> 
> v3 -> v4:
> 	  1. fix sparse warnings.
> 	  2. release mutex lock in error conditions.
> 
> v4 -> v5:
> 	  1. fix pahole reported issues
>           2. add documentation for htb offload flow.
> 
> v5 -> v6:
> 	  1. fix synchronization issues w.r.t hlist accessing
>              from ndo_select_queue with rcu lock.
>           2. initialize qos related resources in device init.
> 
> v6 -> v7:
> 	  1. fix erros reported by sparse and clang
> 
> v7 -> v8:
> 	  1. cover letter header is malformed in last version.
>              correct the cover letter
> v8 -> v9:
> 	  1. fix issues reported by smatch

Thanks. I checked and all issues I've reported are resolved.