Re: [RFC PATCH net] sfc: Fix use-after-free due to selftest_work

[Martin Habets <habetsm.xilinx@gmail.com>]

On Fri, Apr 14, 2023 at 07:03:41PM +0800, Ding Hui wrote:
> On 2023/4/14 17:44, Martin Habets wrote:
> > On Thu, Apr 13, 2023 at 04:35:08PM +0800, Ding Hui wrote:
> > > On 2023/4/13 15:37, Martin Habets wrote:
> > > > On Wed, Apr 12, 2023 at 08:50:13AM +0800, Ding Hui wrote:
> > > > > There is a use-after-free scenario that is:
> > > > > 
> > > > > When netif_running() is false, user set mac address or vlan tag to VF,
> > > > > the xxx_set_vf_mac() or xxx_set_vf_vlan() will invoke efx_net_stop()
> > > > > and efx_net_open(), since netif_running() is false, the port will not
> > > > > start and keep port_enabled false, but selftest_worker is scheduled
> > > > > in efx_net_open().
> > > > > 
> > > > > If we remove the device before selftest_worker run, the efx is freed,
> > > > > then we will get a UAF in run_timer_softirq() like this:
> > > > > 
> > > > > [ 1178.907941] ==================================================================
> > > > > [ 1178.907948] BUG: KASAN: use-after-free in run_timer_softirq+0xdea/0xe90
> > > > > [ 1178.907950] Write of size 8 at addr ff11001f449cdc80 by task swapper/47/0
> > > > > [ 1178.907950]
> > > > > [ 1178.907953] CPU: 47 PID: 0 Comm: swapper/47 Kdump: loaded Tainted: G           O     --------- -t - 4.18.0 #1
> > > > > [ 1178.907954] Hardware name: SANGFOR X620G40/WI2HG-208T1061A, BIOS SPYH051032-U01 04/01/2022
> > > > > [ 1178.907955] Call Trace:
> > > > > [ 1178.907956]  <IRQ>
> > > > > [ 1178.907960]  dump_stack+0x71/0xab
> > > > > [ 1178.907963]  print_address_description+0x6b/0x290
> > > > > [ 1178.907965]  ? run_timer_softirq+0xdea/0xe90
> > > > > [ 1178.907967]  kasan_report+0x14a/0x2b0
> > > > > [ 1178.907968]  run_timer_softirq+0xdea/0xe90
> > > > > [ 1178.907971]  ? init_timer_key+0x170/0x170
> > > > > [ 1178.907973]  ? hrtimer_cancel+0x20/0x20
> > > > > [ 1178.907976]  ? sched_clock+0x5/0x10
> > > > > [ 1178.907978]  ? sched_clock_cpu+0x18/0x170
> > > > > [ 1178.907981]  __do_softirq+0x1c8/0x5fa
> > > > > [ 1178.907985]  irq_exit+0x213/0x240
> > > > > [ 1178.907987]  smp_apic_timer_interrupt+0xd0/0x330
> > > > > [ 1178.907989]  apic_timer_interrupt+0xf/0x20
> > > > > [ 1178.907990]  </IRQ>
> > > > > [ 1178.907991] RIP: 0010:mwait_idle+0xae/0x370
> > > > > 
> > > > > I am thinking about several ways to fix the issue:
> > > > > 
> > > > > [1] In this RFC, I cancel the selftest_worker unconditionally in
> > > > > efx_pci_remove().
> > > > > 
> > > > > [2] Add a test condition, only invoke efx_selftest_async_start() when
> > > > > efx->port_enabled is true in efx_net_open().
> > > > > 
> > > > > [3] Move invoking efx_selftest_async_start() from efx_net_open() to
> > > > > efx_start_all() or efx_start_port(), that matching cancel action in
> > > > > efx_stop_port().
> > > > 
> > > > I think moving this to efx_start_port() is best, as you say to match
> > > > the cancel in efx_stop_port().
> > > > 
> > > 
> > > If moving to efx_start_port(), should we worry about that IRQ_TIMEOUT
> > > is still enough?
> > 
> > 1 second is a long time for a machine running code, so it does not worry me.
> > 
> > > I'm not sure if there is a long time waiting from starting of schedule
> > > selftest_work to the ending of efx_net_open().
> > 
> > I see your point. Looking at efx_start_all() there is the call to
> > efx_start_datapath() after the call to efx_net_open(), which takes a
>                                          ^^^^^^^^^^^^
> Do you mean efx_start_port()?

Woops, yes that what I meant.

> > relatively long time (well under 200ms though).
> > Logically it would be better to move efx_selftest_async_start() after this
> > call. What do you think?
> 
> Agree with you.
> 
> > The point here is that efx_start_all() calls efx_start_port() early, and
> > efx_stop_all() also calls efx_stop_port() early. The calling sequence is
> > correct but they are not the strict inverse of each other.
> > 
> 
> Yeah, that is what I noticed monitor_work does.
> Then I'll move efx_selftest_async_start() into efx_start_all(), follows
> the monitor_work.

Sounds good.

Thanks,
Martin

> -- 
> Thanks,
> - Ding Hui