From: Daniel Golle <daniel@makrotopia.org>
To: netdev@vger.kernel.org, linux-mediatek@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
"Sean Wang" <sean.wang@mediatek.com>,
"Landen Chao" <Landen.Chao@mediatek.com>,
"DENG Qingfang" <dqfext@gmail.com>,
"Andrew Lunn" <andrew@lunn.ch>,
"Florian Fainelli" <f.fainelli@gmail.com>,
"Vladimir Oltean" <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
"Eric Dumazet" <edumazet@google.com>,
"Jakub Kicinski" <kuba@kernel.org>,
"Paolo Abeni" <pabeni@redhat.com>,
"Russell King" <linux@armlinux.org.uk>,
"AngeloGioacchino Del Regno"
<angelogioacchino.delregno@collabora.com>,
"Matthias Brugger" <matthias.bgg@gmail.com>,
"Arınç ÜNAL" <arinc.unal@arinc9.com>,
"Jesse Brandeburg" <jesse.brandeburg@intel.com>
Subject: [PATCH net-next v2] net: dsa: mt7530: fix support for MT7531BE
Date: Sun, 16 Apr 2023 13:08:14 +0100 [thread overview]
Message-ID: <ZDvlLhhqheobUvOK@makrotopia.org> (raw)
There are two variants of the MT7531 switch IC which got different
features (and pins) regarding port 5:
* MT7531AE: SGMII/1000Base-X/2500Base-X SerDes PCS
* MT7531BE: RGMII
Moving the creation of the SerDes PCS from mt753x_setup to mt7530_probe
with commit 6de285229773 ("net: dsa: mt7530: move SGMII PCS creation
to mt7530_probe function") works fine for MT7531AE which got two
instances of mtk-pcs-lynxi, however, MT7531BE requires mt7531_pll_setup
to setup clocks before the single PCS on port 6 (usually used as CPU
port) starts to work and hence the PCS creation failed on MT7531BE.
Fix this by introducing a pointer to mt7531_create_sgmii function in
struct mt7530_priv and call it again at the end of mt753x_setup like it
was before commit 6de285229773 ("net: dsa: mt7530: move SGMII PCS
creation to mt7530_probe function").
Fixes: 6de285229773 ("net: dsa: mt7530: move SGMII PCS creation to mt7530_probe function")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
drivers/net/dsa/mt7530-mdio.c | 16 ++++++++--------
drivers/net/dsa/mt7530.c | 6 ++++++
drivers/net/dsa/mt7530.h | 4 ++--
3 files changed, 16 insertions(+), 10 deletions(-)
diff --git a/drivers/net/dsa/mt7530-mdio.c b/drivers/net/dsa/mt7530-mdio.c
index 34a547b88e497..088533663b83b 100644
--- a/drivers/net/dsa/mt7530-mdio.c
+++ b/drivers/net/dsa/mt7530-mdio.c
@@ -81,14 +81,17 @@ static const struct regmap_bus mt7530_regmap_bus = {
};
static int
-mt7531_create_sgmii(struct mt7530_priv *priv)
+mt7531_create_sgmii(struct mt7530_priv *priv, bool dual_sgmii)
{
- struct regmap_config *mt7531_pcs_config[2];
+ struct regmap_config *mt7531_pcs_config[2] = {};
struct phylink_pcs *pcs;
struct regmap *regmap;
int i, ret = 0;
- for (i = 0; i < 2; i++) {
+ /* MT7531AE has two SGMII units for port 5 and port 6
+ * MT7531BE has only one SGMII unit for port 6
+ */
+ for (i = dual_sgmii ? 0 : 1; i < 2; i++) {
mt7531_pcs_config[i] = devm_kzalloc(priv->dev,
sizeof(struct regmap_config),
GFP_KERNEL);
@@ -208,11 +211,8 @@ mt7530_probe(struct mdio_device *mdiodev)
if (IS_ERR(priv->regmap))
return PTR_ERR(priv->regmap);
- if (priv->id == ID_MT7531) {
- ret = mt7531_create_sgmii(priv);
- if (ret)
- return ret;
- }
+ if (priv->id == ID_MT7531)
+ priv->create_sgmii = mt7531_create_sgmii;
return dsa_register_switch(priv->ds);
}
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index e4bb5037d3525..c680873819b01 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -3018,6 +3018,12 @@ mt753x_setup(struct dsa_switch *ds)
if (ret && priv->irq)
mt7530_free_irq_common(priv);
+ if (priv->create_sgmii) {
+ ret = priv->create_sgmii(priv, mt7531_dual_sgmii_supported(priv));
+ if (ret && priv->irq)
+ mt7530_free_irq(priv);
+ }
+
return ret;
}
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index 01db5c9724fa8..5084f48a88691 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -748,10 +748,10 @@ struct mt753x_info {
* registers
* @p6_interface Holding the current port 6 interface
* @p5_intf_sel: Holding the current port 5 interface select
- *
* @irq: IRQ number of the switch
* @irq_domain: IRQ domain of the switch irq_chip
* @irq_enable: IRQ enable bits, synced to SYS_INT_EN
+ * @create_sgmii: Pointer to function creating SGMII PCS instance(s)
*/
struct mt7530_priv {
struct device *dev;
@@ -770,7 +770,6 @@ struct mt7530_priv {
unsigned int p5_intf_sel;
u8 mirror_rx;
u8 mirror_tx;
-
struct mt7530_port ports[MT7530_NUM_PORTS];
struct mt753x_pcs pcs[MT7530_NUM_PORTS];
/* protect among processes for registers access*/
@@ -778,6 +777,7 @@ struct mt7530_priv {
int irq;
struct irq_domain *irq_domain;
u32 irq_enable;
+ int (*create_sgmii)(struct mt7530_priv *priv, bool dual_sgmii);
};
struct mt7530_hw_vlan_entry {
base-commit: e61caf04b9f8a2626714ffd12e734c555c758af4
--
2.40.0
next reply other threads:[~2023-04-16 12:09 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-16 12:08 Daniel Golle [this message]
2023-04-16 13:48 ` [PATCH net-next v2] net: dsa: mt7530: fix support for MT7531BE Arınç ÜNAL
2023-04-16 14:18 ` Daniel Golle
2023-04-16 21:28 ` Arınç ÜNAL
2023-04-17 11:39 ` Daniel Golle
2023-04-17 12:39 ` Arınç ÜNAL
2023-04-20 0:22 ` Daniel Golle
2023-04-20 0:41 ` Jakub Kicinski
2023-04-20 0:40 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZDvlLhhqheobUvOK@makrotopia.org \
--to=daniel@makrotopia.org \
--cc=Landen.Chao@mediatek.com \
--cc=andrew@lunn.ch \
--cc=angelogioacchino.delregno@collabora.com \
--cc=arinc.unal@arinc9.com \
--cc=davem@davemloft.net \
--cc=dqfext@gmail.com \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=jesse.brandeburg@intel.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux@armlinux.org.uk \
--cc=matthias.bgg@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=sean.wang@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).