From: Simon Horman <simon.horman@corigine.com>
To: Vladimir Oltean <vladimir.oltean@nxp.com>
Cc: netdev@vger.kernel.org, "David S. Miller" <davem@davemloft.net>,
Michal Kubecek <mkubecek@suse.cz>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Claudiu Manoil <claudiu.manoil@nxp.com>,
Xiaoliang Yang <xiaoliang.yang_1@nxp.com>,
Petr Machata <petrm@nvidia.com>,
Danielle Ratson <danieller@nvidia.com>,
Pranavi Somisetty <pranavi.somisetty@amd.com>,
Harini Katakam <harini.katakam@amd.com>,
Vinicius Costa Gomes <vinicius.gomes@intel.com>,
Kurt Kanzenbach <kurt@linutronix.de>,
Gerhard Engleder <gerhard@engleder-embedded.com>,
Ferenc Fejes <ferenc.fejes@ericsson.com>,
Aaron Conole <aconole@redhat.com>,
linux-kselftest@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 net-next 4/9] net: enetc: include MAC Merge / FP registers in register dump
Date: Thu, 20 Apr 2023 16:38:00 +0200 [thread overview]
Message-ID: <ZEFOSGwKhIyzwWmB@corigine.com> (raw)
In-Reply-To: <20230418111459.811553-5-vladimir.oltean@nxp.com>
On Tue, Apr 18, 2023 at 02:14:54PM +0300, Vladimir Oltean wrote:
> These have been useful in debugging various problems related to frame
> preemption, so make them available through ethtool --register-dump for
> later too.
>
> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
> ---
> v1->v2: patch is new
>
> .../ethernet/freescale/enetc/enetc_ethtool.c | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
>
> diff --git a/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c b/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c
> index 838a92131963..e993ed04ab57 100644
> --- a/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c
> +++ b/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c
> @@ -32,6 +32,12 @@ static const u32 enetc_port_regs[] = {
> ENETC_PM0_CMD_CFG, ENETC_PM0_MAXFRM, ENETC_PM0_IF_MODE
> };
>
> +static const u32 enetc_port_mm_regs[] = {
> + ENETC_MMCSR, ENETC_PFPMR, ENETC_PTCFPR(0), ENETC_PTCFPR(1),
> + ENETC_PTCFPR(2), ENETC_PTCFPR(3), ENETC_PTCFPR(4), ENETC_PTCFPR(5),
> + ENETC_PTCFPR(6), ENETC_PTCFPR(7),
> +};
> +
> static int enetc_get_reglen(struct net_device *ndev)
> {
> struct enetc_ndev_priv *priv = netdev_priv(ndev);
> @@ -45,6 +51,9 @@ static int enetc_get_reglen(struct net_device *ndev)
> if (hw->port)
> len += ARRAY_SIZE(enetc_port_regs);
>
> + if (hw->port && !!(priv->si->hw_features & ENETC_SI_F_QBU))
nit: I think you could make the condition.
if (hw->port && priv->si->hw_features & ENETC_SI_F_QBU)
which would be consistent with the condition in the next hunk.
> + len += ARRAY_SIZE(enetc_port_mm_regs);
> +
> len *= sizeof(u32) * 2; /* store 2 entries per reg: addr and value */
>
> return len;
> @@ -90,6 +99,14 @@ static void enetc_get_regs(struct net_device *ndev, struct ethtool_regs *regs,
> *buf++ = addr;
> *buf++ = enetc_rd(hw, addr);
> }
> +
> + if (priv->si->hw_features & ENETC_SI_F_QBU) {
> + for (i = 0; i < ARRAY_SIZE(enetc_port_mm_regs); i++) {
> + addr = ENETC_PORT_BASE + enetc_port_mm_regs[i];
> + *buf++ = addr;
> + *buf++ = enetc_rd(hw, addr);
> + }
> + }
> }
>
> static const struct {
> --
> 2.34.1
>
next prev parent reply other threads:[~2023-04-20 14:38 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-18 11:14 [PATCH v2 net-next 0/9] ethtool mm API consolidation Vladimir Oltean
2023-04-18 11:14 ` [PATCH v2 net-next 1/9] net: enetc: fix MAC Merge layer remaining enabled until a link down event Vladimir Oltean
2023-04-20 14:22 ` Simon Horman
2023-04-20 17:03 ` Vladimir Oltean
2023-04-21 9:01 ` Simon Horman
2023-04-18 11:14 ` [PATCH v2 net-next 2/9] net: enetc: report mm tx-active based on tx-enabled and verify-status Vladimir Oltean
2023-04-20 14:40 ` Simon Horman
2023-04-18 11:14 ` [PATCH v2 net-next 3/9] net: enetc: only commit preemptible TCs to hardware when MM TX is active Vladimir Oltean
2023-04-20 14:42 ` Simon Horman
2023-04-20 16:34 ` Vladimir Oltean
2023-04-20 16:49 ` Simon Horman
2023-04-18 11:14 ` [PATCH v2 net-next 4/9] net: enetc: include MAC Merge / FP registers in register dump Vladimir Oltean
2023-04-20 14:38 ` Simon Horman [this message]
2023-04-20 16:58 ` Vladimir Oltean
2023-04-21 9:03 ` Simon Horman
2023-04-18 11:14 ` [PATCH v2 net-next 5/9] net: ethtool: mm: sanitize some UAPI configurations Vladimir Oltean
2023-04-20 14:43 ` Simon Horman
2023-04-18 11:14 ` [PATCH v2 net-next 6/9] selftests: forwarding: sch_tbf_*: Add a pre-run hook Vladimir Oltean
2023-04-18 11:14 ` [PATCH v2 net-next 7/9] selftests: forwarding: generalize bail_on_lldpad from mlxsw Vladimir Oltean
2023-04-18 11:14 ` [PATCH v2 net-next 8/9] selftests: forwarding: introduce helper for standard ethtool counters Vladimir Oltean
2023-04-18 11:14 ` [PATCH v2 net-next 9/9] selftests: forwarding: add a test for MAC Merge layer Vladimir Oltean
2023-04-21 3:10 ` [PATCH v2 net-next 0/9] ethtool mm API consolidation patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZEFOSGwKhIyzwWmB@corigine.com \
--to=simon.horman@corigine.com \
--cc=aconole@redhat.com \
--cc=claudiu.manoil@nxp.com \
--cc=danieller@nvidia.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=ferenc.fejes@ericsson.com \
--cc=gerhard@engleder-embedded.com \
--cc=harini.katakam@amd.com \
--cc=kuba@kernel.org \
--cc=kurt@linutronix.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=mkubecek@suse.cz \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=petrm@nvidia.com \
--cc=pranavi.somisetty@amd.com \
--cc=vinicius.gomes@intel.com \
--cc=vladimir.oltean@nxp.com \
--cc=xiaoliang.yang_1@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).