Re: [net-next PATCH] octeontx2-pf: mcs: Offload extended packet number(XPN) feature

[Simon Horman <simon.horman@corigine.com>]

On Wed, May 10, 2023 at 08:21:23PM +0530, Subbaraya Sundeep wrote:
> The macsec hardware block supports XPN cipher suites also.
> Hence added changes to offload XPN feature. Changes include
> configuring SecY policy to XPN cipher suite, Salt and SSCI values.
> 64 bit packet number is passed instead of 32 bit packet number.
> 
> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>

...

> @@ -349,6 +366,15 @@ static int cn10k_mcs_write_rx_sa_plcy(struct otx2_nic *pfvf,
>  		reg++;
>  	}
>  
> +	if (secy->xpn) {
> +		memcpy((u8 *)&salt_63_0, salt_p, 8);
> +		memcpy((u8 *)&ssci_salt_95_64, salt_p + 8, 4);
> +		ssci_salt_95_64 |= (u64)rxsc->ssci[assoc_num] << 32;

Hi Subbaraya,

Sparse says:

drivers/net/ethernet/marvell/octeontx2/nic/cn10k_macsec.c:372:37: warning: cast from restricted ssci_t
drivers/net/ethernet/marvell/octeontx2/nic/cn10k_macsec.c:611:37: warning: cast from restricted ssci_t

I think if you really need a u64 here then you need (__force u64).
But of course at that point any help types and annotations give
you have been thrown out the window.

> +
> +		plcy_req->plcy[0][6] = salt_63_0;
> +		plcy_req->plcy[0][7] = ssci_salt_95_64;
> +	}
> +
>  	plcy_req->sa_index[0] = rxsc->hw_sa_id[assoc_num];
>  	plcy_req->sa_cnt = 1;
>  	plcy_req->dir = MCS_RX;

...

> @@ -561,6 +605,15 @@ static int cn10k_mcs_write_tx_sa_plcy(struct otx2_nic *pfvf,
>  		reg++;
>  	}
>  
> +	if (secy->xpn) {
> +		memcpy((u8 *)&salt_63_0, salt_p, 8);
> +		memcpy((u8 *)&ssci_salt_95_64, salt_p + 8, 4);
> +		ssci_salt_95_64 |= (u64)txsc->ssci[assoc_num] << 32;
> +
> +		plcy_req->plcy[0][6] = salt_63_0;
> +		plcy_req->plcy[0][7] = ssci_salt_95_64;
> +	}
> +
>  	plcy_req->plcy[0][8] = assoc_num;
>  	plcy_req->sa_index[0] = txsc->hw_sa_id[assoc_num];
>  	plcy_req->sa_cnt = 1;

...