netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
To: Simon Horman <simon.horman@corigine.com>
Cc: <intel-wired-lan@lists.osuosl.org>, <netdev@vger.kernel.org>,
	<bpf@vger.kernel.org>, <anthony.l.nguyen@intel.com>,
	<magnus.karlsson@intel.com>
Subject: Re: [PATCH iwl-net] ice: recycle/free all of the fragments from multi-buffer packet
Date: Mon, 15 May 2023 15:17:33 +0200	[thread overview]
Message-ID: <ZGIw7fN3Xz4rmzkA@boxer> (raw)
In-Reply-To: <ZF5dQ/RHROwLxJQC@corigine.com>

On Fri, May 12, 2023 at 05:37:39PM +0200, Simon Horman wrote:
> On Fri, May 12, 2023 at 03:23:30PM +0200, Maciej Fijalkowski wrote:
> > The ice driver caches next_to_clean value at the beginning of
> > ice_clean_rx_irq() in order to remember the first buffer that has to be
> > freed/recycled after main Rx processing loop. The end is indicated by
> > first descriptor of packet that the Rx processing loop has ended. Note
> > that if mentioned loop ended in the middle of gathering a multi-buffer
> > packet, next_to_clean would be pointing to the descriptor in the middle
> > of the packet BUT freeing/recycling stage will stop at the first
> > descriptor. This means that next iteration of ice_clean_rx_irq() will
> > miss the (first_desc, next_to_clean - 1) entries.
> > 
> >  When running various 9K MTU workloads, such splats were observed,
> > mostly related to rx_buf->page being NULL as behavior described in the
> > paragraph above breaks ICE_RX_DESC_UNUSED() macro which is used when
> > refilling Rx buffers:
> > 
> > [  540.780716] BUG: kernel NULL pointer dereference, address: 0000000000000000
> > [  540.787787] #PF: supervisor read access in kernel mode
> > [  540.793002] #PF: error_code(0x0000) - not-present page
> > [  540.798218] PGD 0 P4D 0
> > [  540.800801] Oops: 0000 [#1] PREEMPT SMP NOPTI
> > [  540.805231] CPU: 18 PID: 3984 Comm: xskxceiver Tainted: G        W          6.3.0-rc7+ #96
> > [  540.813619] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019
> > [  540.824209] RIP: 0010:ice_clean_rx_irq+0x2b6/0xf00 [ice]
> > [  540.829678] Code: 74 24 10 e9 aa 00 00 00 8b 55 78 41 31 57 10 41 09 c4 4d 85 ff 0f 84 83 00 00 00 49 8b 57 08 41 8b 4f 1c 65 8b 35 1a fa 4b 3f <48> 8b 02 48 c1 e8 3a 39 c6 0f 85 a2 00 00 00 f6 42 08 02 0f 85 98
> > [  540.848717] RSP: 0018:ffffc9000f42fc50 EFLAGS: 00010282
> > [  540.854029] RAX: 0000000000000004 RBX: 0000000000000002 RCX: 000000000000fffe
> > [  540.861272] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 00000000ffffffff
> > [  540.868519] RBP: ffff88984a05ac00 R08: 0000000000000000 R09: dead000000000100
> > [  540.875760] R10: ffff88983fffcd00 R11: 000000000010f2b8 R12: 0000000000000004
> > [  540.883008] R13: 0000000000000003 R14: 0000000000000800 R15: ffff889847a10040
> > [  540.890253] FS:  00007f6ddf7fe640(0000) GS:ffff88afdf800000(0000) knlGS:0000000000000000
> > [  540.898465] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > [  540.904299] CR2: 0000000000000000 CR3: 000000010d3da001 CR4: 00000000007706e0
> > [  540.911542] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> > [  540.918789] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> > [  540.926032] PKRU: 55555554
> > [  540.928790] Call Trace:
> > [  540.931276]  <TASK>
> > [  540.933418]  ice_napi_poll+0x4ca/0x6d0 [ice]
> > [  540.937804]  ? __pfx_ice_napi_poll+0x10/0x10 [ice]
> > [  540.942716]  napi_busy_loop+0xd7/0x320
> > [  540.946537]  xsk_recvmsg+0x143/0x170
> > [  540.950178]  sock_recvmsg+0x99/0xa0
> > [  540.953729]  __sys_recvfrom+0xa8/0x120
> > [  540.957543]  ? do_futex+0xbd/0x1d0
> > [  540.961008]  ? __x64_sys_futex+0x73/0x1d0
> > [  540.965083]  __x64_sys_recvfrom+0x20/0x30
> > [  540.969155]  do_syscall_64+0x38/0x90
> > [  540.972796]  entry_SYSCALL_64_after_hwframe+0x72/0xdc
> > [  540.977934] RIP: 0033:0x7f6de5f27934
> > 
> > To fix this, compare next_to_clean with first_desc at the beginning of
> > ice_clean_rx_irq(). In the case they are not the same, set cached_ntc to
> > first_desc so that at the end, when freeing/recycling buffers,
> > descriptors from first to ntc are not missed.
> > 
> > Fixes: 2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side")
> > Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
> > ---
> >  drivers/net/ethernet/intel/ice/ice_txrx.c | 3 +++
> >  1 file changed, 3 insertions(+)
> > 
> > diff --git a/drivers/net/ethernet/intel/ice/ice_txrx.c b/drivers/net/ethernet/intel/ice/ice_txrx.c
> > index 4fcf2d07eb85..4d1fc047767f 100644
> > --- a/drivers/net/ethernet/intel/ice/ice_txrx.c
> > +++ b/drivers/net/ethernet/intel/ice/ice_txrx.c
> > @@ -1162,6 +1162,9 @@ int ice_clean_rx_irq(struct ice_rx_ring *rx_ring, int budget)
> >  	bool failure;
> >  	u32 first;
> >  
> > +	if (ntc != rx_ring->first_desc)
> > +		cached_ntc = rx_ring->first_desc;
> > +
> 
> Above ntc is initialised as rx_ring->next_to_clean.
> And cached_ntc is initialised as ntc, i.e. rx_ring->next_to_clean.
> 
> 	u32 ntc = rx_ring->next_to_clean;
>         ...
>         u32 cached_ntc = ntc;
> 
> So in effect we have:
> 
> 	if (rx_ring->next_to_clean != rx_ring->first_desc)
> 		cached_ntc = rx_ring->first_desc;
> 	else
> 		cached_ntc = rx_ring->next_to_clean;
> 
> I wonder if we can simplify this by simply initialising cached_ntc as:
> 
> 	cached_ntc = rx_ring->first_desc;

Thanks for taking a fresh look over this, indeed this can be simplified as
you pointed out :) being stuck on some problem makes us sometimes unable
to see such obvious things ;)

Will send a v2.


  reply	other threads:[~2023-05-15 13:17 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-12 13:23 [PATCH iwl-net] ice: recycle/free all of the fragments from multi-buffer packet Maciej Fijalkowski
2023-05-12 15:37 ` Simon Horman
2023-05-15 13:17   ` Maciej Fijalkowski [this message]
2023-05-15 14:39     ` Simon Horman
2023-05-12 15:40 ` Piotr Raczynski
2023-05-15 13:13   ` Maciej Fijalkowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZGIw7fN3Xz4rmzkA@boxer \
    --to=maciej.fijalkowski@intel.com \
    --cc=anthony.l.nguyen@intel.com \
    --cc=bpf@vger.kernel.org \
    --cc=intel-wired-lan@lists.osuosl.org \
    --cc=magnus.karlsson@intel.com \
    --cc=netdev@vger.kernel.org \
    --cc=simon.horman@corigine.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).