[PATCH v2] net: macsec SCI assignment for ES = 0

[PATCH v2] net: macsec SCI assignment for ES = 0

[carlos.fernandez]

From: Carlos Fernandez <carlos.fernandez@technica-engineering.de>

According to 802.1AE standard, when ES and SC flags in TCI are zero, used
SCI should be the current active SC_RX. Current kernel does not implement
it and uses the header MAC address.

Without this patch, when ES = 0 (using a bridge or switch), header MAC
will not fit the SCI and MACSec frames will be discarted.

Signed-off-by: Carlos Fernandez <carlos.fernandez@technica-engineering.de>
---
 drivers/net/macsec.c | 28 ++++++++++++++++++++++------
 1 file changed, 22 insertions(+), 6 deletions(-)

diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c
index 3427993f94f7..ccecb7eb385c 100644
--- a/drivers/net/macsec.c
+++ b/drivers/net/macsec.c
@@ -256,16 +256,31 @@ static sci_t make_sci(const u8 *addr, __be16 port)
 	return sci;
 }
 
-static sci_t macsec_frame_sci(struct macsec_eth_header *hdr, bool sci_present)
+static sci_t macsec_frame_sci(struct macsec_eth_header *hdr, bool sci_present,
+		struct macsec_rxh_data *rxd)
 {
+	struct macsec_dev *macsec_device;
 	sci_t sci;
 
-	if (sci_present)
+	if (sci_present) {
 		memcpy(&sci, hdr->secure_channel_id,
-		       sizeof(hdr->secure_channel_id));
-	else
+			sizeof(hdr->secure_channel_id));
+	} else if (0 == (hdr->tci_an & (MACSEC_TCI_ES | MACSEC_TCI_SC))) {
+		list_for_each_entry_rcu(macsec_device, &rxd->secys, secys) {
+			struct macsec_rx_sc *rx_sc;
+			struct macsec_secy *secy = &macsec_device->secy;
+
+			for_each_rxsc(secy, rx_sc) {
+				rx_sc = rx_sc ? macsec_rxsc_get(rx_sc) : NULL;
+				if (rx_sc && rx_sc->active)
+					return rx_sc->sci;
+			}
+			/* If not found, use MAC in hdr as default*/
+			sci = make_sci(hdr->eth.h_source, MACSEC_PORT_ES);
+		}
+	} else {
 		sci = make_sci(hdr->eth.h_source, MACSEC_PORT_ES);
-
+	}
 	return sci;
 }
 
@@ -1150,11 +1165,12 @@ static rx_handler_result_t macsec_handle_frame(struct sk_buff **pskb)
 
 	macsec_skb_cb(skb)->has_sci = !!(hdr->tci_an & MACSEC_TCI_SC);
 	macsec_skb_cb(skb)->assoc_num = hdr->tci_an & MACSEC_AN_MASK;
-	sci = macsec_frame_sci(hdr, macsec_skb_cb(skb)->has_sci);
 
 	rcu_read_lock();
 	rxd = macsec_data_rcu(skb->dev);
 
+	sci = macsec_frame_sci(hdr, macsec_skb_cb(skb)->has_sci, rxd);
+
 	list_for_each_entry_rcu(macsec, &rxd->secys, secys) {
 		struct macsec_rx_sc *sc = find_rx_sc(&macsec->secy, sci);
 
-- 
2.34.1

Re: [PATCH v2] net: macsec SCI assignment for ES = 0

[Simon Horman]

On Fri, Jun 16, 2023 at 11:24:04AM +0200, carlos.fernandez@technica-engineering.de wrote:
> From: Carlos Fernandez <carlos.fernandez@technica-engineering.de>
> 
> According to 802.1AE standard, when ES and SC flags in TCI are zero, used
> SCI should be the current active SC_RX. Current kernel does not implement
> it and uses the header MAC address.
> 
> Without this patch, when ES = 0 (using a bridge or switch), header MAC
> will not fit the SCI and MACSec frames will be discarted.
> 
> Signed-off-by: Carlos Fernandez <carlos.fernandez@technica-engineering.de>
> ---
>  drivers/net/macsec.c | 28 ++++++++++++++++++++++------
>  1 file changed, 22 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c
> index 3427993f94f7..ccecb7eb385c 100644
> --- a/drivers/net/macsec.c
> +++ b/drivers/net/macsec.c
> @@ -256,16 +256,31 @@ static sci_t make_sci(const u8 *addr, __be16 port)
>  	return sci;
>  }
>  
> -static sci_t macsec_frame_sci(struct macsec_eth_header *hdr, bool sci_present)
> +static sci_t macsec_frame_sci(struct macsec_eth_header *hdr, bool sci_present,
> +		struct macsec_rxh_data *rxd)
>  {
> +	struct macsec_dev *macsec_device;
>  	sci_t sci;
>  
> -	if (sci_present)
> +	if (sci_present) {
>  		memcpy(&sci, hdr->secure_channel_id,
> -		       sizeof(hdr->secure_channel_id));
> -	else
> +			sizeof(hdr->secure_channel_id));
> +	} else if (0 == (hdr->tci_an & (MACSEC_TCI_ES | MACSEC_TCI_SC))) {
> +		list_for_each_entry_rcu(macsec_device, &rxd->secys, secys) {
> +			struct macsec_rx_sc *rx_sc;
> +			struct macsec_secy *secy = &macsec_device->secy;
> +
> +			for_each_rxsc(secy, rx_sc) {
> +				rx_sc = rx_sc ? macsec_rxsc_get(rx_sc) : NULL;
> +				if (rx_sc && rx_sc->active)
> +					return rx_sc->sci;
> +			}
> +			/* If not found, use MAC in hdr as default*/
> +			sci = make_sci(hdr->eth.h_source, MACSEC_PORT_ES);

Hi Carlos,

sorry for the slow response.
And also for asking about this same topic a second time.

Does the list_for_each_entry_rcu() loop always iterate at least once,
if the else if condition is met?

If not, sci may be uninitialised when returned at the end of this function.

As reported by Smatch:

 .../macsec.c:284 macsec_frame_sci() error: uninitialized symbol 'sci'.

> +		}
> +	} else {
>  		sci = make_sci(hdr->eth.h_source, MACSEC_PORT_ES);
> -
> +	}
>  	return sci;
>  }
>  
> @@ -1150,11 +1165,12 @@ static rx_handler_result_t macsec_handle_frame(struct sk_buff **pskb)
>  
>  	macsec_skb_cb(skb)->has_sci = !!(hdr->tci_an & MACSEC_TCI_SC);
>  	macsec_skb_cb(skb)->assoc_num = hdr->tci_an & MACSEC_AN_MASK;
> -	sci = macsec_frame_sci(hdr, macsec_skb_cb(skb)->has_sci);
>  
>  	rcu_read_lock();
>  	rxd = macsec_data_rcu(skb->dev);
>  
> +	sci = macsec_frame_sci(hdr, macsec_skb_cb(skb)->has_sci, rxd);
> +
>  	list_for_each_entry_rcu(macsec, &rxd->secys, secys) {
>  		struct macsec_rx_sc *sc = find_rx_sc(&macsec->secy, sci);
>  
> -- 
> 2.34.1
> 
> 

Re: [PATCH v2] net: macsec SCI assignment for ES = 0

[Carlos Fernandez]

Hi Simon,
Sorry I misplaced the default sci initialization. I'll send it again.

Thanks,

________________________________________
From: Simon Horman <simon.horman@corigine.com>
Sent: Monday, June 19, 2023 3:47 PM
To: Carlos Fernandez
Cc: davem@davemloft.net; edumazet@google.com; kuba@kernel.org; pabeni@redhat.com; netdev@vger.kernel.org; linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] net: macsec SCI assignment for ES = 0

CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.

On Fri, Jun 16, 2023 at 11:24:04AM +0200, carlos.fernandez@technica-engineering.de wrote:
> From: Carlos Fernandez <carlos.fernandez@technica-engineering.de>
>
> According to 802.1AE standard, when ES and SC flags in TCI are zero, used
> SCI should be the current active SC_RX. Current kernel does not implement
> it and uses the header MAC address.
>
> Without this patch, when ES = 0 (using a bridge or switch), header MAC
> will not fit the SCI and MACSec frames will be discarted.
>
> Signed-off-by: Carlos Fernandez <carlos.fernandez@technica-engineering.de>
> ---
>  drivers/net/macsec.c | 28 ++++++++++++++++++++++------
>  1 file changed, 22 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c
> index 3427993f94f7..ccecb7eb385c 100644
> --- a/drivers/net/macsec.c
> +++ b/drivers/net/macsec.c
> @@ -256,16 +256,31 @@ static sci_t make_sci(const u8 *addr, __be16 port)
>       return sci;
>  }
>
> -static sci_t macsec_frame_sci(struct macsec_eth_header *hdr, bool sci_present)
> +static sci_t macsec_frame_sci(struct macsec_eth_header *hdr, bool sci_present,
> +             struct macsec_rxh_data *rxd)
>  {
> +     struct macsec_dev *macsec_device;
>       sci_t sci;
>
> -     if (sci_present)
> +     if (sci_present) {
>               memcpy(&sci, hdr->secure_channel_id,
> -                    sizeof(hdr->secure_channel_id));
> -     else
> +                     sizeof(hdr->secure_channel_id));
> +     } else if (0 == (hdr->tci_an & (MACSEC_TCI_ES | MACSEC_TCI_SC))) {
> +             list_for_each_entry_rcu(macsec_device, &rxd->secys, secys) {
> +                     struct macsec_rx_sc *rx_sc;
> +                     struct macsec_secy *secy = &macsec_device->secy;
> +
> +                     for_each_rxsc(secy, rx_sc) {
> +                             rx_sc = rx_sc ? macsec_rxsc_get(rx_sc) : NULL;
> +                             if (rx_sc && rx_sc->active)
> +                                     return rx_sc->sci;
> +                     }
> +                     /* If not found, use MAC in hdr as default*/
> +                     sci = make_sci(hdr->eth.h_source, MACSEC_PORT_ES);

Hi Carlos,

sorry for the slow response.
And also for asking about this same topic a second time.

Does the list_for_each_entry_rcu() loop always iterate at least once,
if the else if condition is met?

If not, sci may be uninitialised when returned at the end of this function.

As reported by Smatch:

 .../macsec.c:284 macsec_frame_sci() error: uninitialized symbol 'sci'.

> +             }
> +     } else {
>               sci = make_sci(hdr->eth.h_source, MACSEC_PORT_ES);
> -
> +     }
>       return sci;
>  }
>
> @@ -1150,11 +1165,12 @@ static rx_handler_result_t macsec_handle_frame(struct sk_buff **pskb)
>
>       macsec_skb_cb(skb)->has_sci = !!(hdr->tci_an & MACSEC_TCI_SC);
>       macsec_skb_cb(skb)->assoc_num = hdr->tci_an & MACSEC_AN_MASK;
> -     sci = macsec_frame_sci(hdr, macsec_skb_cb(skb)->has_sci);
>
>       rcu_read_lock();
>       rxd = macsec_data_rcu(skb->dev);
>
> +     sci = macsec_frame_sci(hdr, macsec_skb_cb(skb)->has_sci, rxd);
> +
>       list_for_each_entry_rcu(macsec, &rxd->secys, secys) {
>               struct macsec_rx_sc *sc = find_rx_sc(&macsec->secy, sci);
>
> --
> 2.34.1
>
>