* [PATCH net-next v3] netconsole: Enable compile time configuration @ 2023-08-01 10:05 Breno Leitao 2023-08-03 7:47 ` Eric Dumazet 0 siblings, 1 reply; 3+ messages in thread From: Breno Leitao @ 2023-08-01 10:05 UTC (permalink / raw) To: rdunlap, benjamin.poirier, David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni Cc: leit, open list:NETWORKING DRIVERS, open list Enable netconsole features to be set at compilation time. Create two Kconfig options that allow users to set extended logs and release prepending features at compilation time. Right now, the user needs to pass command line parameters to netconsole, such as "+"/"r" to enable extended logs and version prepending features. With these two options, the user could set the default values for the features at compile time, and don't need to pass it in the command line to get them enabled, simplifying the command line. Signed-off-by: Breno Leitao <leitao@debian.org> --- v1 -> v2: * Improvements in the Kconfig help section. v2 -> v3: * Honour the Kconfig settings when creating sysfs targets * Add "by default" in a Kconfig help. --- drivers/net/Kconfig | 22 ++++++++++++++++++++++ drivers/net/netconsole.c | 10 ++++++++++ 2 files changed, 32 insertions(+) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 368c6f5b327e..55fb9509bcae 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -332,6 +332,28 @@ config NETCONSOLE_DYNAMIC at runtime through a userspace interface exported using configfs. See <file:Documentation/networking/netconsole.rst> for details. +config NETCONSOLE_EXTENDED_LOG + bool "Set kernel extended message by default" + depends on NETCONSOLE + default n + help + Set extended log support for netconsole message. If this option is + set, log messages are transmitted with extended metadata header in a + format similar to /dev/kmsg. See + <file:Documentation/networking/netconsole.rst> for details. + +config NETCONSOLE_PREPEND_RELEASE + bool "Prepend kernel release version in the message by default" + depends on NETCONSOLE_EXTENDED_LOG + default n + help + Set kernel release to be prepended to each netconsole message by + default. If this option is set, the kernel release is prepended into + the first field of every netconsole message, so, the netconsole + server/peer can easily identify what kernel release is logging each + message. See <file:Documentation/networking/netconsole.rst> for + details. + config NETPOLL def_bool NETCONSOLE diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c index 87f18aedd3bd..e3b6155f4529 100644 --- a/drivers/net/netconsole.c +++ b/drivers/net/netconsole.c @@ -181,6 +181,11 @@ static struct netconsole_target *alloc_param_target(char *target_config) if (!nt) goto fail; + if (IS_ENABLED(CONFIG_NETCONSOLE_EXTENDED_LOG)) + nt->extended = true; + if (IS_ENABLED(CONFIG_NETCONSOLE_PREPEND_RELEASE)) + nt->release = true; + nt->np.name = "netconsole"; strscpy(nt->np.dev_name, "eth0", IFNAMSIZ); nt->np.local_port = 6665; @@ -681,6 +686,11 @@ static struct config_item *make_netconsole_target(struct config_group *group, nt->np.remote_port = 6666; eth_broadcast_addr(nt->np.remote_mac); + if (IS_ENABLED(CONFIG_NETCONSOLE_EXTENDED_LOG)) + nt->extended = true; + if (IS_ENABLED(CONFIG_NETCONSOLE_PREPEND_RELEASE)) + nt->release = true; + /* Initialize the config_item member */ config_item_init_type_name(&nt->item, name, &netconsole_target_type); -- 2.34.1 ^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH net-next v3] netconsole: Enable compile time configuration 2023-08-01 10:05 [PATCH net-next v3] netconsole: Enable compile time configuration Breno Leitao @ 2023-08-03 7:47 ` Eric Dumazet 2023-08-03 11:29 ` Breno Leitao 0 siblings, 1 reply; 3+ messages in thread From: Eric Dumazet @ 2023-08-03 7:47 UTC (permalink / raw) To: Breno Leitao Cc: rdunlap, benjamin.poirier, David S. Miller, Jakub Kicinski, Paolo Abeni, leit, open list:NETWORKING DRIVERS, open list On Tue, Aug 1, 2023 at 12:06 PM Breno Leitao <leitao@debian.org> wrote: > > Enable netconsole features to be set at compilation time. Create two > Kconfig options that allow users to set extended logs and release > prepending features at compilation time. > > Right now, the user needs to pass command line parameters to netconsole, > such as "+"/"r" to enable extended logs and version prepending features. > > With these two options, the user could set the default values for the > features at compile time, and don't need to pass it in the command line > to get them enabled, simplifying the command line. > > Signed-off-by: Breno Leitao <leitao@debian.org> > --- > v1 -> v2: > * Improvements in the Kconfig help section. > v2 -> v3: > * Honour the Kconfig settings when creating sysfs targets > * Add "by default" in a Kconfig help. > --- > drivers/net/Kconfig | 22 ++++++++++++++++++++++ > drivers/net/netconsole.c | 10 ++++++++++ > 2 files changed, 32 insertions(+) > > diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig > index 368c6f5b327e..55fb9509bcae 100644 > --- a/drivers/net/Kconfig > +++ b/drivers/net/Kconfig > @@ -332,6 +332,28 @@ config NETCONSOLE_DYNAMIC > at runtime through a userspace interface exported using configfs. > See <file:Documentation/networking/netconsole.rst> for details. > > +config NETCONSOLE_EXTENDED_LOG > + bool "Set kernel extended message by default" > + depends on NETCONSOLE > + default n > + help > + Set extended log support for netconsole message. If this option is > + set, log messages are transmitted with extended metadata header in a > + format similar to /dev/kmsg. See > + <file:Documentation/networking/netconsole.rst> for details. > + > +config NETCONSOLE_PREPEND_RELEASE > + bool "Prepend kernel release version in the message by default" > + depends on NETCONSOLE_EXTENDED_LOG > + default n > + help > + Set kernel release to be prepended to each netconsole message by > + default. If this option is set, the kernel release is prepended into > + the first field of every netconsole message, so, the netconsole > + server/peer can easily identify what kernel release is logging each > + message. See <file:Documentation/networking/netconsole.rst> for > + details. > + > config NETPOLL > def_bool NETCONSOLE > > diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c > index 87f18aedd3bd..e3b6155f4529 100644 > --- a/drivers/net/netconsole.c > +++ b/drivers/net/netconsole.c > @@ -181,6 +181,11 @@ static struct netconsole_target *alloc_param_target(char *target_config) > if (!nt) > goto fail; > > + if (IS_ENABLED(CONFIG_NETCONSOLE_EXTENDED_LOG)) > + nt->extended = true; > + if (IS_ENABLED(CONFIG_NETCONSOLE_PREPEND_RELEASE)) > + nt->release = true; > + > nt->np.name = "netconsole"; > strscpy(nt->np.dev_name, "eth0", IFNAMSIZ); > nt->np.local_port = 6665; > @@ -681,6 +686,11 @@ static struct config_item *make_netconsole_target(struct config_group *group, > nt->np.remote_port = 6666; > eth_broadcast_addr(nt->np.remote_mac); > > + if (IS_ENABLED(CONFIG_NETCONSOLE_EXTENDED_LOG)) > + nt->extended = true; > + if (IS_ENABLED(CONFIG_NETCONSOLE_PREPEND_RELEASE)) > + nt->release = true; > + Instead of duplicating these, what about adding a preliminary helper in a separate patch ? Something like this: drivers/net/netconsole.c | 45 ++++++++++++++++++++------------------------- 1 file changed, 20 insertions(+), 25 deletions(-) diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c index 87f18aedd3bd7b3da9d2481dc9898e94dd75917b..a022ceaa2e3c4783ca0ea61c1c7b9f911d087abc 100644 --- a/drivers/net/netconsole.c +++ b/drivers/net/netconsole.c @@ -167,26 +167,32 @@ static void netconsole_target_put(struct netconsole_target *nt) #endif /* CONFIG_NETCONSOLE_DYNAMIC */ +/* + * Allocate and initialize with defaults. + * Note that these targets get their config_item fields zeroed-out. + */ +static struct netconsole_target *alloc_and_init(void) +{ + struct netconsole_target *nt = kzalloc(sizeof(*nt), GFP_KERNEL); + + if (nt) { + nt->np.name = "netconsole"; + strscpy(nt->np.dev_name, "eth0", IFNAMSIZ); + nt->np.local_port = 6665; + nt->np.remote_port = 6666; + eth_broadcast_addr(nt->np.remote_mac); + } + return nt; +} + /* Allocate new target (from boot/module param) and setup netpoll for it */ static struct netconsole_target *alloc_param_target(char *target_config) { + struct netconsole_target *nt = alloc_and_init(); int err = -ENOMEM; - struct netconsole_target *nt; - /* - * Allocate and initialize with defaults. - * Note that these targets get their config_item fields zeroed-out. - */ - nt = kzalloc(sizeof(*nt), GFP_KERNEL); if (!nt) goto fail; - - nt->np.name = "netconsole"; - strscpy(nt->np.dev_name, "eth0", IFNAMSIZ); - nt->np.local_port = 6665; - nt->np.remote_port = 6666; - eth_broadcast_addr(nt->np.remote_mac); - if (*target_config == '+') { nt->extended = true; target_config++; @@ -664,23 +670,12 @@ static const struct config_item_type netconsole_target_type = { static struct config_item *make_netconsole_target(struct config_group *group, const char *name) { + struct netconsole_target *nt = alloc_and_init(); unsigned long flags; - struct netconsole_target *nt; - /* - * Allocate and initialize with defaults. - * Target is disabled at creation (!enabled). - */ - nt = kzalloc(sizeof(*nt), GFP_KERNEL); if (!nt) return ERR_PTR(-ENOMEM); - nt->np.name = "netconsole"; - strscpy(nt->np.dev_name, "eth0", IFNAMSIZ); - nt->np.local_port = 6665; - nt->np.remote_port = 6666; - eth_broadcast_addr(nt->np.remote_mac); - /* Initialize the config_item member */ config_item_init_type_name(&nt->item, name, &netconsole_target_type); ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH net-next v3] netconsole: Enable compile time configuration 2023-08-03 7:47 ` Eric Dumazet @ 2023-08-03 11:29 ` Breno Leitao 0 siblings, 0 replies; 3+ messages in thread From: Breno Leitao @ 2023-08-03 11:29 UTC (permalink / raw) To: Eric Dumazet Cc: rdunlap, benjamin.poirier, David S. Miller, Jakub Kicinski, Paolo Abeni, leit, open list:NETWORKING DRIVERS, open list On Thu, Aug 03, 2023 at 09:47:43AM +0200, Eric Dumazet wrote: > On Tue, Aug 1, 2023 at 12:06 PM Breno Leitao <leitao@debian.org> wrote: > > > > Enable netconsole features to be set at compilation time. Create two > > Kconfig options that allow users to set extended logs and release > > prepending features at compilation time. > > > > Right now, the user needs to pass command line parameters to netconsole, > > such as "+"/"r" to enable extended logs and version prepending features. > > > > With these two options, the user could set the default values for the > > features at compile time, and don't need to pass it in the command line > > to get them enabled, simplifying the command line. > > > > Signed-off-by: Breno Leitao <leitao@debian.org> > > --- > > v1 -> v2: > > * Improvements in the Kconfig help section. > > v2 -> v3: > > * Honour the Kconfig settings when creating sysfs targets > > * Add "by default" in a Kconfig help. > > --- > > drivers/net/Kconfig | 22 ++++++++++++++++++++++ > > drivers/net/netconsole.c | 10 ++++++++++ > > 2 files changed, 32 insertions(+) > > > > diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig > > index 368c6f5b327e..55fb9509bcae 100644 > > --- a/drivers/net/Kconfig > > +++ b/drivers/net/Kconfig > > @@ -332,6 +332,28 @@ config NETCONSOLE_DYNAMIC > > at runtime through a userspace interface exported using configfs. > > See <file:Documentation/networking/netconsole.rst> for details. > > > > +config NETCONSOLE_EXTENDED_LOG > > + bool "Set kernel extended message by default" > > + depends on NETCONSOLE > > + default n > > + help > > + Set extended log support for netconsole message. If this option is > > + set, log messages are transmitted with extended metadata header in a > > + format similar to /dev/kmsg. See > > + <file:Documentation/networking/netconsole.rst> for details. > > + > > +config NETCONSOLE_PREPEND_RELEASE > > + bool "Prepend kernel release version in the message by default" > > + depends on NETCONSOLE_EXTENDED_LOG > > + default n > > + help > > + Set kernel release to be prepended to each netconsole message by > > + default. If this option is set, the kernel release is prepended into > > + the first field of every netconsole message, so, the netconsole > > + server/peer can easily identify what kernel release is logging each > > + message. See <file:Documentation/networking/netconsole.rst> for > > + details. > > + > > config NETPOLL > > def_bool NETCONSOLE > > > > diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c > > index 87f18aedd3bd..e3b6155f4529 100644 > > --- a/drivers/net/netconsole.c > > +++ b/drivers/net/netconsole.c > > @@ -181,6 +181,11 @@ static struct netconsole_target *alloc_param_target(char *target_config) > > if (!nt) > > goto fail; > > > > + if (IS_ENABLED(CONFIG_NETCONSOLE_EXTENDED_LOG)) > > + nt->extended = true; > > + if (IS_ENABLED(CONFIG_NETCONSOLE_PREPEND_RELEASE)) > > + nt->release = true; > > + > > nt->np.name = "netconsole"; > > strscpy(nt->np.dev_name, "eth0", IFNAMSIZ); > > nt->np.local_port = 6665; > > @@ -681,6 +686,11 @@ static struct config_item *make_netconsole_target(struct config_group *group, > > nt->np.remote_port = 6666; > > eth_broadcast_addr(nt->np.remote_mac); > > > > + if (IS_ENABLED(CONFIG_NETCONSOLE_EXTENDED_LOG)) > > + nt->extended = true; > > + if (IS_ENABLED(CONFIG_NETCONSOLE_PREPEND_RELEASE)) > > + nt->release = true; > > + > > Instead of duplicating these, what about adding a preliminary helper > in a separate patch ? That is a good idea, I will update. Thanks! ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2023-08-03 11:29 UTC | newest] Thread overview: 3+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2023-08-01 10:05 [PATCH net-next v3] netconsole: Enable compile time configuration Breno Leitao 2023-08-03 7:47 ` Eric Dumazet 2023-08-03 11:29 ` Breno Leitao
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).