netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Breno Leitao <leitao@debian.org>
To: Simon Horman <horms@kernel.org>
Cc: rdunlap@infradead.org, benjamin.poirier@gmail.com,
	davem@davemloft.net, kuba@kernel.org, edumazet@google.com,
	Paolo Abeni <pabeni@redhat.com>,
	netdev@vger.kernel.org, open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH net-next v5 1/2] netconsole: Create a allocation helper
Date: Fri, 11 Aug 2023 01:58:25 -0700	[thread overview]
Message-ID: <ZNX4MexwrLKMABx+@gmail.com> (raw)
In-Reply-To: <ZNVFzhBVT/LyhTuR@vergenet.net>

Hello Simon,

On Thu, Aug 10, 2023 at 10:17:18PM +0200, Simon Horman wrote:
> On Thu, Aug 10, 2023 at 02:54:50AM -0700, Breno Leitao wrote:
> > De-duplicate the initialization and allocation code for struct
> > netconsole_target.
> > 
> > The same allocation and initialization code is duplicated in two
> > different places in the netconsole subsystem, when the netconsole target
> > is initialized by command line parameters (alloc_param_target()), and
> > dynamically by sysfs (make_netconsole_target()).
> > 
> > Create a helper function, and call it from the two different functions.
> > 
> > Suggested-by: Eric Dumazet <edumazet@google.com>
> > Signed-off-by: Breno Leitao <leitao@debian.org>
> > ---
> >  drivers/net/netconsole.c | 42 +++++++++++++++++++++-------------------
> >  1 file changed, 22 insertions(+), 20 deletions(-)
> > 
> > diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c
> > index 87f18aedd3bd..f93b98d64a3c 100644
> > --- a/drivers/net/netconsole.c
> > +++ b/drivers/net/netconsole.c
> > @@ -167,19 +167,16 @@ static void netconsole_target_put(struct netconsole_target *nt)
> >  
> >  #endif	/* CONFIG_NETCONSOLE_DYNAMIC */
> >  
> > -/* Allocate new target (from boot/module param) and setup netpoll for it */
> > -static struct netconsole_target *alloc_param_target(char *target_config)
> > +/* Allocate and initialize with defaults.
> > + * Note that these targets get their config_item fields zeroed-out.
> > + */
> > +static struct netconsole_target *alloc_and_init(void)
> >  {
> > -	int err = -ENOMEM;
> >  	struct netconsole_target *nt;
> >  
> > -	/*
> > -	 * Allocate and initialize with defaults.
> > -	 * Note that these targets get their config_item fields zeroed-out.
> > -	 */
> >  	nt = kzalloc(sizeof(*nt), GFP_KERNEL);
> >  	if (!nt)
> > -		goto fail;
> > +		return nt;
> >  
> >  	nt->np.name = "netconsole";
> >  	strscpy(nt->np.dev_name, "eth0", IFNAMSIZ);
> > @@ -187,6 +184,21 @@ static struct netconsole_target *alloc_param_target(char *target_config)
> >  	nt->np.remote_port = 6666;
> >  	eth_broadcast_addr(nt->np.remote_mac);
> >  
> > +	return nt;
> > +}
> > +
> > +/* Allocate new target (from boot/module param) and setup netpoll for it */
> > +static struct netconsole_target *alloc_param_target(char *target_config)
> > +{
> > +	struct netconsole_target *nt;
> > +	int err;
> 
> Hi Breno,
> 
> This function returns err.
> However, clang-16 W=1 and Smatch warn that there is a case
> where this may occur without err having being initialised.

That can really happen, if we get into this function:

        if (*target_config == 'r') {
                if (!nt->extended) {
                        pr_err("Netconsole configuration error. Release feature requires extended log message");
                        goto fail;

	fail:
		return ERR_PTR(err);


Let me update it.

  reply	other threads:[~2023-08-11  8:58 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-08-10  9:54 [PATCH net-next v5 0/2] netconsole: Enable compile time configuration Breno Leitao
2023-08-10  9:54 ` [PATCH net-next v5 1/2] netconsole: Create a allocation helper Breno Leitao
2023-08-10 20:17   ` Simon Horman
2023-08-11  8:58     ` Breno Leitao [this message]
2023-08-10  9:54 ` [PATCH net-next v5 2/2] netconsole: Enable compile time configuration Breno Leitao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZNX4MexwrLKMABx+@gmail.com \
    --to=leitao@debian.org \
    --cc=benjamin.poirier@gmail.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=horms@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=rdunlap@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).