Re: [PATCH net-next v4 0/9] Create common DPLL configuration API

[Jiri Pirko <jiri@resnulli.us>]

Fri, Aug 11, 2023 at 10:03:31PM CEST, vadim.fedorenko@linux.dev wrote:
>Implement common API for DPLL configuration and status reporting.
>The API utilises netlink interface as transport for commands and event
>notifications. This API aims to extend current pin configuration 
>provided by PTP subsystem and make it flexible and easy to cover
>complex configurations.
>
>Netlink interface is based on ynl spec, it allows use of in-kernel
>tools/net/ynl/cli.py application to control the interface with properly
>formated command and json attribute strings. Here are few command
>examples of how it works with `ice` driver on supported NIC:
>
>- dump dpll devices
>$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \
>--dump device-get
>[{'clock-id': 282574471561216,
>  'id': 0,
>  'lock-status': 'unlocked',
>  'mode': 'automatic',
>  'module-name': 'ice',
>  'type': 'eec'},
> {'clock-id': 282574471561216,
>  'id': 1,
>  'lock-status': 'unlocked',
>  'mode': 'automatic',
>  'module-name': 'ice',
>  'type': 'pps'}]
>
>- get single pin info:
>$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \
>--do pin-get --json '{"pin-id":2}'
>{'clock-id': 282574471561216,
> 'module-name': 'ice',
> 'pin-board-label': 'C827_0-RCLKA',
> 'pin-dpll-caps': 6,
> 'pin-frequency': 1953125,
> 'pin-id': 2,
> 'pin-parent-device': [{'id': 0,
>                         'pin-direction': 'input',
>                         'pin-prio': 11,
>                         'pin-state': 'selectable'},
>                        {'id': 1,
>                         'pin-direction': 'input',
>                         'pin-prio': 9,
>                         'pin-state': 'selectable'}],
> 'pin-type': 'mux'}
>
>- set pin's state on dpll:
>$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \
>--do pin-set --json '{"pin-id":2, "pin-parent-device":{"id":1, "pin-state":2}}'
>
>- set pin's prio on dpll:
>$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \
>--do pin-set --json '{"pin-id":2, "pin-parent-device":{"id":1, "pin-prio":4}}'
>
>- set pin's state on parent pin:
>$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \
>--do pin-set --json '{"pin-id":13, \
>                      "pin-parent-pin":{"pin-id":2, "pin-state":1}}'
>

For the record, I'm fine with this patchset version now.
Please merge and make this jurney to be over. Thanks!