Re: [RFC PATCH net-next 1/7] net: phy: introduce phy numbering and phy namespaces

["Russell King (Oracle)" <linux@armlinux.org.uk>]

On Thu, Sep 07, 2023 at 11:23:59AM +0200, Maxime Chevallier wrote:
> Link topologies containing multiple network PHYs attached to the same
> net_device can be found when using a PHY as a media converter for use
> with an SFP connector, on which an SFP transceiver containing a PHY can
> be used.
> 
> With the current model, the transceiver's PHY can't be used for
> operations such as cable testing, timestamping, macsec offload, etc.
> 
> The reason being that most of the logic for these configuration, coming
> from either ethtool netlink or ioctls tend to use netdev->phydev, which
> in multi-phy systems will reference the PHY closest to the MAC.
> 
> Introduce a numbering scheme allowing to enumerate PHY devices that
> belong to any netdev, which can in turn allow userspace to take more
> precise decisions with regard to each PHY's configuration.
> 
> The numbering is maintained per-netdev, hence the notion of PHY
> namespaces. The numbering works similarly to a netdevice's ifindex, with
> identifiers that are only recycled once INT_MAX has been reached.
> 
> This prevents races that could occur between PHY listing and SFP
> transceiver removal/insertion.
> 
> The identifiers are assigned at phy_attach time, as the numbering
> depends on the netdevice the phy is attached to.

I think you can simplify this code quite a bit by using idr.
idr_alloc_cyclic() looks like it will do the allocation you want,
plus the IDR subsystem will store the pointer to the object (in
this case the phy device) and allow you to look that up. That
probably gets rid of quite a bit of code.

You will need to handle the locking around IDR however.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!