[net-next 0/5] net: ethernet: renesas: rcar_gen4_ptp: Add V4H support

[net-next 0/5] net: ethernet: renesas: rcar_gen4_ptp: Add V4H support

[Niklas Söderlund]

Hello,

This small series prepares the rcar_gen4_ptp to be useable both on both 
R-Car S4 and V4H. The only in-tree driver that make use of this is 
rswtich on S4. A new Ethernet (R-Car Ethernet TSN) driver for V4H is on 
it's way that also will make use of rcar_gen4_ptp functionality.

Patch 1-2 are small improvements to the existing driver. While patch 3-4 
adds V4H support. Finally patch 5 turns rcar_gen4_ptp into a separate 
module to allow the gPTP functionality to be shared between the two 
users without having to duplicate the code in each.

Niklas Söderlund (5):
  net: ethernet: renesas: rcar_gen4_ptp: Remove incorrect comment
  net: ethernet: renesas: rcar_gen4_ptp: Fail on unknown register layout
  net: ethernet: renesas: rcar_gen4_ptp: Prepare for shared register
    layout
  net: ethernet: renesas: rcar_gen4_ptp: Add V4H clock setting
  net: ethernet: renesas: rcar_gen4_ptp: Break out to module

 drivers/net/ethernet/renesas/Kconfig         | 10 ++++++++
 drivers/net/ethernet/renesas/Makefile        |  5 ++--
 drivers/net/ethernet/renesas/rcar_gen4_ptp.c | 24 +++++++++++++++-----
 drivers/net/ethernet/renesas/rcar_gen4_ptp.h | 13 +++++++----
 drivers/net/ethernet/renesas/rswitch.c       |  2 +-
 5 files changed, 40 insertions(+), 14 deletions(-)

-- 
2.42.1

[net-next 1/5] net: ethernet: renesas: rcar_gen4_ptp: Remove incorrect comment

[Niklas Söderlund]

The comments intent was to indicates which function uses the enum. While
upstreaming rcar_gen4_ptp the function was renamed but this comment was
left with the old function name.

Instead of correcting the comment remove it, it adds little value.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
 drivers/net/ethernet/renesas/rcar_gen4_ptp.h | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/ethernet/renesas/rcar_gen4_ptp.h b/drivers/net/ethernet/renesas/rcar_gen4_ptp.h
index b1bbea8d3a52..9f148110df66 100644
--- a/drivers/net/ethernet/renesas/rcar_gen4_ptp.h
+++ b/drivers/net/ethernet/renesas/rcar_gen4_ptp.h
@@ -13,7 +13,6 @@
 #define RCAR_GEN4_PTP_CLOCK_S4		PTPTIVC_INIT
 #define RCAR_GEN4_GPTP_OFFSET_S4	0x00018000
 
-/* for rcar_gen4_ptp_init */
 enum rcar_gen4_ptp_reg_layout {
 	RCAR_GEN4_PTP_REG_LAYOUT_S4
 };
-- 
2.42.1

Re: [net-next 1/5] net: ethernet: renesas: rcar_gen4_ptp: Remove incorrect comment

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 475 bytes --]

On Fri, Nov 17, 2023 at 05:43:28PM +0100, Niklas Söderlund wrote:
> The comments intent was to indicates which function uses the enum. While
> upstreaming rcar_gen4_ptp the function was renamed but this comment was
> left with the old function name.
> 
> Instead of correcting the comment remove it, it adds little value.
> 
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[net-next 2/5] net: ethernet: renesas: rcar_gen4_ptp: Fail on unknown register layout

[Niklas Söderlund]

Instead of printing a warning and proceeding with an unknown register
layout return an error. The only call site is already prepared to
propagate the error.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
 drivers/net/ethernet/renesas/rcar_gen4_ptp.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/renesas/rcar_gen4_ptp.c b/drivers/net/ethernet/renesas/rcar_gen4_ptp.c
index c007e33c47e1..443ca5a18703 100644
--- a/drivers/net/ethernet/renesas/rcar_gen4_ptp.c
+++ b/drivers/net/ethernet/renesas/rcar_gen4_ptp.c
@@ -130,23 +130,30 @@ static struct ptp_clock_info rcar_gen4_ptp_info = {
 	.enable = rcar_gen4_ptp_enable,
 };
 
-static void rcar_gen4_ptp_set_offs(struct rcar_gen4_ptp_private *ptp_priv,
-				   enum rcar_gen4_ptp_reg_layout layout)
+static int rcar_gen4_ptp_set_offs(struct rcar_gen4_ptp_private *ptp_priv,
+				  enum rcar_gen4_ptp_reg_layout layout)
 {
-	WARN_ON(layout != RCAR_GEN4_PTP_REG_LAYOUT_S4);
+	if (layout != RCAR_GEN4_PTP_REG_LAYOUT_S4)
+		return -EINVAL;
 
 	ptp_priv->offs = &s4_offs;
+
+	return 0;
 }
 
 int rcar_gen4_ptp_register(struct rcar_gen4_ptp_private *ptp_priv,
 			   enum rcar_gen4_ptp_reg_layout layout, u32 clock)
 {
+	int ret;
+
 	if (ptp_priv->initialized)
 		return 0;
 
 	spin_lock_init(&ptp_priv->lock);
 
-	rcar_gen4_ptp_set_offs(ptp_priv, layout);
+	ret = rcar_gen4_ptp_set_offs(ptp_priv, layout);
+	if (ret)
+		return ret;
 
 	ptp_priv->default_addend = clock;
 	iowrite32(ptp_priv->default_addend, ptp_priv->addr + ptp_priv->offs->increment);
-- 
2.42.1

Re: [net-next 2/5] net: ethernet: renesas: rcar_gen4_ptp: Fail on unknown register layout

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 380 bytes --]

On Fri, Nov 17, 2023 at 05:43:29PM +0100, Niklas Söderlund wrote:
> Instead of printing a warning and proceeding with an unknown register
> layout return an error. The only call site is already prepared to
> propagate the error.
> 
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[net-next 3/5] net: ethernet: renesas: rcar_gen4_ptp: Prepare for shared register layout

[Niklas Söderlund]

All know R-Car Gen4 SoC share the same register layout, rename the R-Car
S4 specific identifiers so they can be shared with the upcoming R-Car
V4H support.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
 drivers/net/ethernet/renesas/rcar_gen4_ptp.c | 6 +++---
 drivers/net/ethernet/renesas/rcar_gen4_ptp.h | 4 ++--
 drivers/net/ethernet/renesas/rswitch.c       | 2 +-
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/renesas/rcar_gen4_ptp.c b/drivers/net/ethernet/renesas/rcar_gen4_ptp.c
index 443ca5a18703..59f6351e9ae9 100644
--- a/drivers/net/ethernet/renesas/rcar_gen4_ptp.c
+++ b/drivers/net/ethernet/renesas/rcar_gen4_ptp.c
@@ -14,7 +14,7 @@
 #include "rcar_gen4_ptp.h"
 #define ptp_to_priv(ptp)	container_of(ptp, struct rcar_gen4_ptp_private, info)
 
-static const struct rcar_gen4_ptp_reg_offset s4_offs = {
+static const struct rcar_gen4_ptp_reg_offset gen4_offs = {
 	.enable = PTPTMEC,
 	.disable = PTPTMDC,
 	.increment = PTPTIVC0,
@@ -133,10 +133,10 @@ static struct ptp_clock_info rcar_gen4_ptp_info = {
 static int rcar_gen4_ptp_set_offs(struct rcar_gen4_ptp_private *ptp_priv,
 				  enum rcar_gen4_ptp_reg_layout layout)
 {
-	if (layout != RCAR_GEN4_PTP_REG_LAYOUT_S4)
+	if (layout != RCAR_GEN4_PTP_REG_LAYOUT)
 		return -EINVAL;
 
-	ptp_priv->offs = &s4_offs;
+	ptp_priv->offs = &gen4_offs;
 
 	return 0;
 }
diff --git a/drivers/net/ethernet/renesas/rcar_gen4_ptp.h b/drivers/net/ethernet/renesas/rcar_gen4_ptp.h
index 9f148110df66..35664d1dc472 100644
--- a/drivers/net/ethernet/renesas/rcar_gen4_ptp.h
+++ b/drivers/net/ethernet/renesas/rcar_gen4_ptp.h
@@ -14,7 +14,7 @@
 #define RCAR_GEN4_GPTP_OFFSET_S4	0x00018000
 
 enum rcar_gen4_ptp_reg_layout {
-	RCAR_GEN4_PTP_REG_LAYOUT_S4
+	RCAR_GEN4_PTP_REG_LAYOUT
 };
 
 /* driver's definitions */
@@ -27,7 +27,7 @@ enum rcar_gen4_ptp_reg_layout {
 
 #define PTPRO				0
 
-enum rcar_gen4_ptp_reg_s4 {
+enum rcar_gen4_ptp_reg {
 	PTPTMEC		= PTPRO + 0x0010,
 	PTPTMDC		= PTPRO + 0x0014,
 	PTPTIVC0	= PTPRO + 0x0020,
diff --git a/drivers/net/ethernet/renesas/rswitch.c b/drivers/net/ethernet/renesas/rswitch.c
index 43a7795d6591..e1e29a2caf22 100644
--- a/drivers/net/ethernet/renesas/rswitch.c
+++ b/drivers/net/ethernet/renesas/rswitch.c
@@ -1828,7 +1828,7 @@ static int rswitch_init(struct rswitch_private *priv)
 
 	rswitch_fwd_init(priv);
 
-	err = rcar_gen4_ptp_register(priv->ptp_priv, RCAR_GEN4_PTP_REG_LAYOUT_S4,
+	err = rcar_gen4_ptp_register(priv->ptp_priv, RCAR_GEN4_PTP_REG_LAYOUT,
 				     RCAR_GEN4_PTP_CLOCK_S4);
 	if (err < 0)
 		goto err_ptp_register;
-- 
2.42.1

Re: [net-next 3/5] net: ethernet: renesas: rcar_gen4_ptp: Prepare for shared register layout

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 412 bytes --]

On Fri, Nov 17, 2023 at 05:43:30PM +0100, Niklas Söderlund wrote:
> All know R-Car Gen4 SoC share the same register layout, rename the R-Car

"known"

> S4 specific identifiers so they can be shared with the upcoming R-Car
> V4H support.
> 
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

Other than that:

Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[net-next 4/5] net: ethernet: renesas: rcar_gen4_ptp: Add V4H clock setting

[Niklas Söderlund]

The gPTP clock is different between R-Car S4 and R-Car V4H. In
preparation of adding R-Car V4H support define the clock setting.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
 drivers/net/ethernet/renesas/rcar_gen4_ptp.h | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/renesas/rcar_gen4_ptp.h b/drivers/net/ethernet/renesas/rcar_gen4_ptp.h
index 35664d1dc472..b83a209e9845 100644
--- a/drivers/net/ethernet/renesas/rcar_gen4_ptp.h
+++ b/drivers/net/ethernet/renesas/rcar_gen4_ptp.h
@@ -9,8 +9,12 @@
 
 #include <linux/ptp_clock_kernel.h>
 
-#define PTPTIVC_INIT			0x19000000	/* 320MHz */
-#define RCAR_GEN4_PTP_CLOCK_S4		PTPTIVC_INIT
+#define PTPTIVC_INIT_200MHZ		0x28000000	/* 200MHz */
+#define PTPTIVC_INIT_320MHZ		0x19000000	/* 320MHz */
+
+#define RCAR_GEN4_PTP_CLOCK_S4		PTPTIVC_INIT_320MHZ
+#define RCAR_GEN4_PTP_CLOCK_V4H		PTPTIVC_INIT_200MHZ
+
 #define RCAR_GEN4_GPTP_OFFSET_S4	0x00018000
 
 enum rcar_gen4_ptp_reg_layout {
-- 
2.42.1

Re: [net-next 4/5] net: ethernet: renesas: rcar_gen4_ptp: Add V4H clock setting

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 135 bytes --]


> +#define RCAR_GEN4_PTP_CLOCK_V4H		PTPTIVC_INIT_200MHZ

Is this easier right now or could it be added together with the TSN
driver?


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [net-next 4/5] net: ethernet: renesas: rcar_gen4_ptp: Add V4H clock setting

[Niklas Söderlund]

Hi Wolfram,

Thanks for your review.

On 2023-11-17 13:00:42 -0500, Wolfram Sang wrote:
> 
> > +#define RCAR_GEN4_PTP_CLOCK_V4H		PTPTIVC_INIT_200MHZ
> 
> Is this easier right now or could it be added together with the TSN
> driver?
> 

I could not make up my mind, I think ether is fine. I opted to put it in 
this series to group all gPTP changes in one series. If you think it's 
better moved to the upcoming TSN series I can move it there.

-- 
Kind Regards,
Niklas Söderlund

Re: [net-next 4/5] net: ethernet: renesas: rcar_gen4_ptp: Add V4H clock setting

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 256 bytes --]


> I could not make up my mind, I think ether is fine. I opted to put it in 
> this series to group all gPTP changes in one series. If you think it's 
> better moved to the upcoming TSN series I can move it there.

No, I also think either is fine.


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [net-next 4/5] net: ethernet: renesas: rcar_gen4_ptp: Add V4H clock setting

[Geert Uytterhoeven]

Hi Niklas,

On Fri, Nov 17, 2023 at 5:45 PM Niklas Söderlund
<niklas.soderlund+renesas@ragnatech.se> wrote:
> The gPTP clock is different between R-Car S4 and R-Car V4H. In
> preparation of adding R-Car V4H support define the clock setting.
>
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

Thanks for your patch!

> --- a/drivers/net/ethernet/renesas/rcar_gen4_ptp.h
> +++ b/drivers/net/ethernet/renesas/rcar_gen4_ptp.h
> @@ -9,8 +9,12 @@
>
>  #include <linux/ptp_clock_kernel.h>
>
> -#define PTPTIVC_INIT                   0x19000000      /* 320MHz */
> -#define RCAR_GEN4_PTP_CLOCK_S4         PTPTIVC_INIT
> +#define PTPTIVC_INIT_200MHZ            0x28000000      /* 200MHz */
> +#define PTPTIVC_INIT_320MHZ            0x19000000      /* 320MHz */
> +
> +#define RCAR_GEN4_PTP_CLOCK_S4         PTPTIVC_INIT_320MHZ
> +#define RCAR_GEN4_PTP_CLOCK_V4H                PTPTIVC_INIT_200MHZ

I think the gPTP Timer Increment Value Configuration value should be
calculated from the module clock rate instead (rsw2 runs at 320 MHz
on R-Car S4, S0D4_HSC and tsn run at 200 MHz on R-Car V4H).

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [net-next 4/5] net: ethernet: renesas: rcar_gen4_ptp: Add V4H clock setting

[Niklas Söderlund]

Hi Geert,

Thanks for your review.

On 2023-11-18 12:16:51 +0100, Geert Uytterhoeven wrote:
> Hi Niklas,
> 
> On Fri, Nov 17, 2023 at 5:45 PM Niklas Söderlund
> <niklas.soderlund+renesas@ragnatech.se> wrote:
> > The gPTP clock is different between R-Car S4 and R-Car V4H. In
> > preparation of adding R-Car V4H support define the clock setting.
> >
> > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> 
> Thanks for your patch!
> 
> > --- a/drivers/net/ethernet/renesas/rcar_gen4_ptp.h
> > +++ b/drivers/net/ethernet/renesas/rcar_gen4_ptp.h
> > @@ -9,8 +9,12 @@
> >
> >  #include <linux/ptp_clock_kernel.h>
> >
> > -#define PTPTIVC_INIT                   0x19000000      /* 320MHz */
> > -#define RCAR_GEN4_PTP_CLOCK_S4         PTPTIVC_INIT
> > +#define PTPTIVC_INIT_200MHZ            0x28000000      /* 200MHz */
> > +#define PTPTIVC_INIT_320MHZ            0x19000000      /* 320MHz */
> > +
> > +#define RCAR_GEN4_PTP_CLOCK_S4         PTPTIVC_INIT_320MHZ
> > +#define RCAR_GEN4_PTP_CLOCK_V4H                PTPTIVC_INIT_200MHZ
> 
> I think the gPTP Timer Increment Value Configuration value should be
> calculated from the module clock rate instead (rsw2 runs at 320 MHz
> on R-Car S4, S0D4_HSC and tsn run at 200 MHz on R-Car V4H).

This is a great idea, I will do so for v2.

> 
> Gr{oetje,eeting}s,
> 
>                         Geert
> 
> -- 
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
> 
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                 -- Linus Torvalds

-- 
Kind Regards,
Niklas Söderlund

[net-next 5/5] net: ethernet: renesas: rcar_gen4_ptp: Break out to module

[Niklas Söderlund]

The Gen3 gPTP support will be shared between the existing Renesas
Ethernet Switch driver and the upcoming Renesas Ethernet-TSN driver. In
preparation for this break out the gPTP support to its own module.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
 drivers/net/ethernet/renesas/Kconfig         | 10 ++++++++++
 drivers/net/ethernet/renesas/Makefile        |  5 +++--
 drivers/net/ethernet/renesas/rcar_gen4_ptp.c |  5 +++++
 3 files changed, 18 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/renesas/Kconfig b/drivers/net/ethernet/renesas/Kconfig
index 8ef5b0241e64..4e7d8546abe2 100644
--- a/drivers/net/ethernet/renesas/Kconfig
+++ b/drivers/net/ethernet/renesas/Kconfig
@@ -44,7 +44,17 @@ config RENESAS_ETHER_SWITCH
 	select CRC32
 	select MII
 	select PHYLINK
+	select RENESAS_GEN4_PTP
 	help
 	  Renesas Ethernet Switch device driver.
 
+config RENESAS_GEN4_PTP
+	tristate "Renesas R-Car Gen4 gPTP support"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	select CRC32
+	select MII
+	select PHYLIB
+	help
+	  Renesas R-Car Gen4 gPTP device driver.
+
 endif # NET_VENDOR_RENESAS
diff --git a/drivers/net/ethernet/renesas/Makefile b/drivers/net/ethernet/renesas/Makefile
index e8fd85b5fe8f..9070acfd6aaf 100644
--- a/drivers/net/ethernet/renesas/Makefile
+++ b/drivers/net/ethernet/renesas/Makefile
@@ -8,5 +8,6 @@ obj-$(CONFIG_SH_ETH) += sh_eth.o
 ravb-objs := ravb_main.o ravb_ptp.o
 obj-$(CONFIG_RAVB) += ravb.o
 
-rswitch_drv-objs := rswitch.o rcar_gen4_ptp.o
-obj-$(CONFIG_RENESAS_ETHER_SWITCH) += rswitch_drv.o
+obj-$(CONFIG_RENESAS_ETHER_SWITCH) += rswitch.o
+
+obj-$(CONFIG_RENESAS_GEN4_PTP) += rcar_gen4_ptp.o
diff --git a/drivers/net/ethernet/renesas/rcar_gen4_ptp.c b/drivers/net/ethernet/renesas/rcar_gen4_ptp.c
index 59f6351e9ae9..22552a8f5430 100644
--- a/drivers/net/ethernet/renesas/rcar_gen4_ptp.c
+++ b/drivers/net/ethernet/renesas/rcar_gen4_ptp.c
@@ -166,6 +166,7 @@ int rcar_gen4_ptp_register(struct rcar_gen4_ptp_private *ptp_priv,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(rcar_gen4_ptp_register);
 
 int rcar_gen4_ptp_unregister(struct rcar_gen4_ptp_private *ptp_priv)
 {
@@ -173,6 +174,7 @@ int rcar_gen4_ptp_unregister(struct rcar_gen4_ptp_private *ptp_priv)
 
 	return ptp_clock_unregister(ptp_priv->clock);
 }
+EXPORT_SYMBOL_GPL(rcar_gen4_ptp_unregister);
 
 struct rcar_gen4_ptp_private *rcar_gen4_ptp_alloc(struct platform_device *pdev)
 {
@@ -186,3 +188,6 @@ struct rcar_gen4_ptp_private *rcar_gen4_ptp_alloc(struct platform_device *pdev)
 
 	return ptp;
 }
+EXPORT_SYMBOL_GPL(rcar_gen4_ptp_alloc);
+
+MODULE_LICENSE("GPL");
-- 
2.42.1

Re: [net-next 5/5] net: ethernet: renesas: rcar_gen4_ptp: Break out to module

[Geert Uytterhoeven]

Hi Niklas,

Thanks for your patch!

On Fri, Nov 17, 2023 at 5:45 PM Niklas Söderlund
<niklas.soderlund+renesas@ragnatech.se> wrote:
> The Gen3 gPTP support will be shared between the existing Renesas

Gen4

> Ethernet Switch driver and the upcoming Renesas Ethernet-TSN driver. In
> preparation for this break out the gPTP support to its own module.
>
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

> --- a/drivers/net/ethernet/renesas/Kconfig
> +++ b/drivers/net/ethernet/renesas/Kconfig
> @@ -44,7 +44,17 @@ config RENESAS_ETHER_SWITCH
>         select CRC32
>         select MII
>         select PHYLINK
> +       select RENESAS_GEN4_PTP
>         help
>           Renesas Ethernet Switch device driver.
>
> +config RENESAS_GEN4_PTP
> +       tristate "Renesas R-Car Gen4 gPTP support"
> +       depends on ARCH_RENESAS || COMPILE_TEST

Perhaps

    tristate "Renesas R-Car Gen4 gPTP support" if COMPILE_TEST

?

The driver is already auto-selected when needed.

> +       select CRC32
> +       select MII
> +       select PHYLIB
> +       help
> +         Renesas R-Car Gen4 gPTP device driver.
> +
>  endif # NET_VENDOR_RENESAS

> --- a/drivers/net/ethernet/renesas/rcar_gen4_ptp.c
> +++ b/drivers/net/ethernet/renesas/rcar_gen4_ptp.c

> @@ -186,3 +188,6 @@ struct rcar_gen4_ptp_private *rcar_gen4_ptp_alloc(struct platform_device *pdev)
>
>         return ptp;
>  }
> +EXPORT_SYMBOL_GPL(rcar_gen4_ptp_alloc);
> +
> +MODULE_LICENSE("GPL");

Please add the other MODULE_*() definitions,too.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [net-next 5/5] net: ethernet: renesas: rcar_gen4_ptp: Break out to module

[Niklas Söderlund]

Hi Geert,

Thanks for your review.

On 2023-11-18 12:20:41 +0100, Geert Uytterhoeven wrote:
> Hi Niklas,
> 
> Thanks for your patch!
> 
> On Fri, Nov 17, 2023 at 5:45 PM Niklas Söderlund
> <niklas.soderlund+renesas@ragnatech.se> wrote:
> > The Gen3 gPTP support will be shared between the existing Renesas
> 
> Gen4
> 
> > Ethernet Switch driver and the upcoming Renesas Ethernet-TSN driver. In
> > preparation for this break out the gPTP support to its own module.
> >
> > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> 
> > --- a/drivers/net/ethernet/renesas/Kconfig
> > +++ b/drivers/net/ethernet/renesas/Kconfig
> > @@ -44,7 +44,17 @@ config RENESAS_ETHER_SWITCH
> >         select CRC32
> >         select MII
> >         select PHYLINK
> > +       select RENESAS_GEN4_PTP
> >         help
> >           Renesas Ethernet Switch device driver.
> >
> > +config RENESAS_GEN4_PTP
> > +       tristate "Renesas R-Car Gen4 gPTP support"
> > +       depends on ARCH_RENESAS || COMPILE_TEST
> 
> Perhaps
> 
>     tristate "Renesas R-Car Gen4 gPTP support" if COMPILE_TEST
> 
> ?
> 
> The driver is already auto-selected when needed.

Good idea, will do for v2.

> 
> > +       select CRC32
> > +       select MII
> > +       select PHYLIB
> > +       help
> > +         Renesas R-Car Gen4 gPTP device driver.
> > +
> >  endif # NET_VENDOR_RENESAS
> 
> > --- a/drivers/net/ethernet/renesas/rcar_gen4_ptp.c
> > +++ b/drivers/net/ethernet/renesas/rcar_gen4_ptp.c
> 
> > @@ -186,3 +188,6 @@ struct rcar_gen4_ptp_private *rcar_gen4_ptp_alloc(struct platform_device *pdev)
> >
> >         return ptp;
> >  }
> > +EXPORT_SYMBOL_GPL(rcar_gen4_ptp_alloc);
> > +
> > +MODULE_LICENSE("GPL");
> 
> Please add the other MODULE_*() definitions,too.

Wops, checkpatch only complained about MODULE_LICENSE, will fix for v2.

> 
> Gr{oetje,eeting}s,
> 
>                         Geert
> 
> -- 
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
> 
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                 -- Linus Torvalds

-- 
Kind Regards,
Niklas Söderlund