From: Lorenzo Bianconi <lorenzo@kernel.org>
To: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: netdev@vger.kernel.org, davem@davemloft.net, edumazet@google.com,
kuba@kernel.org, pabeni@redhat.com, lorenzo.bianconi@redhat.com,
bpf@vger.kernel.org, toke@redhat.com,
willemdebruijn.kernel@gmail.com, jasowang@redhat.com,
kernel-team <kernel-team@cloudflare.com>,
Yan Zhai <yan@cloudflare.com>
Subject: Re: [PATCH v2 net-next 2/2] xdp: add multi-buff support for xdp running in generic mode
Date: Thu, 30 Nov 2023 11:51:05 +0100 [thread overview]
Message-ID: <ZWhpGWDP6mrM-Y35@lore-desk> (raw)
In-Reply-To: <f41935a3-790b-4d23-870c-a37b757aea99@kernel.org>
[-- Attachment #1: Type: text/plain, Size: 8702 bytes --]
>
>
> On 11/30/23 10:11, Lorenzo Bianconi wrote:
> > Similar to native xdp, do not always linearize the skb in
> > netif_receive_generic_xdp routine but create a non-linear xdp_buff to be
> > processed by the eBPF program. This allow to add multi-buffer support
> > for xdp running in generic mode.
> >
> > Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
> > ---
> > net/core/dev.c | 144 ++++++++++++++++++++++++++++++++++++++++---------
> > 1 file changed, 119 insertions(+), 25 deletions(-)
> >
> > diff --git a/net/core/dev.c b/net/core/dev.c
> > index 4df68d7f04a2..0d08e755bb7f 100644
> > --- a/net/core/dev.c
> > +++ b/net/core/dev.c
> > @@ -4853,6 +4853,12 @@ u32 bpf_prog_run_generic_xdp(struct sk_buff *skb, struct xdp_buff *xdp,
> > xdp_init_buff(xdp, frame_sz, &rxqueue->xdp_rxq);
> > xdp_prepare_buff(xdp, hard_start, skb_headroom(skb) - mac_len,
> > skb_headlen(skb) + mac_len, true);
> > + if (skb_is_nonlinear(skb)) {
> > + skb_shinfo(skb)->xdp_frags_size = skb->data_len;
> > + xdp_buff_set_frags_flag(xdp);
> > + } else {
> > + xdp_buff_clear_frags_flag(xdp);
> > + }
> > orig_data_end = xdp->data_end;
> > orig_data = xdp->data;
> > @@ -4882,6 +4888,14 @@ u32 bpf_prog_run_generic_xdp(struct sk_buff *skb, struct xdp_buff *xdp,
> > skb->len += off; /* positive on grow, negative on shrink */
> > }
> > + /* XDP frag metadata (e.g. nr_frags) are updated in eBPF helpers
> > + * (e.g. bpf_xdp_adjust_tail), we need to update data_len here.
> > + */
> > + if (xdp_buff_has_frags(xdp))
> > + skb->data_len = skb_shinfo(skb)->xdp_frags_size;
> > + else
> > + skb->data_len = 0;
> > +
> > /* check if XDP changed eth hdr such SKB needs update */
> > eth = (struct ethhdr *)xdp->data;
> > if ((orig_eth_type != eth->h_proto) ||
> > @@ -4915,54 +4929,134 @@ u32 bpf_prog_run_generic_xdp(struct sk_buff *skb, struct xdp_buff *xdp,
> > return act;
> > }
> > -static u32 netif_receive_generic_xdp(struct sk_buff **pskb,
> > - struct xdp_buff *xdp,
> > - struct bpf_prog *xdp_prog)
> > +static int netif_skb_check_for_generic_xdp(struct sk_buff **pskb,
> > + struct bpf_prog *prog)
>
> I like this is split out into a check function.
>
> > {
> > struct sk_buff *skb = *pskb;
> > - u32 act = XDP_DROP;
> > -
> > - /* Reinjected packets coming from act_mirred or similar should
> > - * not get XDP generic processing.
> > - */
> > - if (skb_is_redirected(skb))
> > - return XDP_PASS;
>
> (For other reviewers)
> This reinjected check is moved further down.
>
> > + int err;
> > - /* XDP packets must be linear and must have sufficient headroom
> > - * of XDP_PACKET_HEADROOM bytes. This is the guarantee that also
> > - * native XDP provides, thus we need to do it here as well.
> > + /* XDP does not support fraglist so we need to linearize
> > + * the skb.
> > */
> > - if (skb_cloned(skb) || skb_is_nonlinear(skb) ||
> > - skb_headroom(skb) < XDP_PACKET_HEADROOM) {
> > + if (skb_has_frag_list(skb) || !prog->aux->xdp_has_frags) {
> > int hroom = XDP_PACKET_HEADROOM - skb_headroom(skb);
> > int troom = skb->tail + skb->data_len - skb->end;
> > /* In case we have to go down the path and also linearize,
> > * then lets do the pskb_expand_head() work just once here.
> > */
> > - if (pskb_expand_head(skb,
> > - hroom > 0 ? ALIGN(hroom, NET_SKB_PAD) : 0,
> > - troom > 0 ? troom + 128 : 0, GFP_ATOMIC))
> > - goto do_drop;
> > - if (skb_linearize(skb))
> > - goto do_drop;
> > + err = pskb_expand_head(skb,
> > + hroom > 0 ? ALIGN(hroom, NET_SKB_PAD) : 0,
> > + troom > 0 ? troom + 128 : 0, GFP_ATOMIC);
> > + if (err)
> > + return err;
> > +
> > + err = skb_linearize(skb);
> > + if (err)
> > + return err;
> > +
> > + return 0;
> > + }
> > +
> > + /* XDP packets must have sufficient headroom of XDP_PACKET_HEADROOM
> > + * bytes. This is the guarantee that also native XDP provides,
> > + * thus we need to do it here as well.
> > + */
> > + if (skb_cloned(skb) || skb_shinfo(skb)->nr_frags ||
>
> I though we could allow a SKB with skb_shinfo(skb)->nr_frags (that isn't
> cloned or shared) to be processed by generic XDP without any reallocation?
I do not think so, we discussed about it with Jakub here [0]
[0] https://lore.kernel.org/netdev/20231128105145.7b39db7d@kernel.org/
>
> So check would be: (skb_cloned(skb) || skb_shared(skb) ||)
>
> > + skb_headroom(skb) < XDP_PACKET_HEADROOM) {
>
> [Headroom trick]
> For layered devices the netstack could be the process that created the
> SKB. If you noticed my veth patchset[4/4], when I detect an XDP-prog
> attach, I'm increasing the net_device headroom (.ndo_set_rx_headroom)
> such that netstack will allocated enough headroom to satisfy
> XDP_PACKET_HEADROOM.
>
> [4/4] https://lore.kernel.org/netdev/169272716651.1975370.10514711233878278884.stgit@firesoul/
Ah nice, for some reason I missed this patch
>
>
>
> > + u32 mac_len = skb->data - skb_mac_header(skb);
> > + u32 size, len, max_head_size, off;
> > + struct sk_buff *nskb;
> > + int i, head_off;
> > +
> > + __skb_push(skb, mac_len);
> > + max_head_size = SKB_WITH_OVERHEAD(PAGE_SIZE -
> > + XDP_PACKET_HEADROOM);
> > + if (skb->len > max_head_size + MAX_SKB_FRAGS * PAGE_SIZE)
> > + return -ENOMEM;
> > +
> > + size = min_t(u32, skb->len, max_head_size);
> > + nskb = netdev_alloc_skb(skb->dev, size + XDP_PACKET_HEADROOM);
>
>
> Would is be possible to use napi_alloc_skb() here?
>
> The napi_alloc_skb() is faster than netdev_alloc_skb(), but it as name
> suggest assumes this is called under NAPI protection/context. It
> used-to-be the case for generic XDP, but code got moved around to
> support layered devices, so I not 100% sure if this is always true (NAPI
> context).
Actually I was thinking about it and I was not 100% sure too (so I decided to
use the non-NAPI version). Any input about it?
Regards,
Lorenzo
>
>
> > + if (!nskb)
> > + return -ENOMEM;
> > +
> > + skb_reserve(nskb, XDP_PACKET_HEADROOM);
> > + skb_copy_header(nskb, skb);
> > +
> > + err = skb_copy_bits(skb, 0, nskb->data, size);
> > + if (err) {
> > + consume_skb(nskb);
> > + return err;
> > + }
> > + skb_put(nskb, size);
> > +
> > + head_off = skb_headroom(nskb) - skb_headroom(skb);
> > + skb_headers_offset_update(nskb, head_off);
> > +
> > + off = size;
> > + len = skb->len - off;
> > + for (i = 0; i < MAX_SKB_FRAGS && off < skb->len; i++) {
> > + struct page *page;
> > + void *frag;
> > +
> > + size = min_t(u32, len, PAGE_SIZE);
> > + frag = netdev_alloc_frag(size);
>
> Again the slower variant.
>
> > + if (!frag) {
> > + consume_skb(nskb);
> > + return -ENOMEM;
> > + }
> > +
> > + page = virt_to_head_page(frag);
> > + skb_add_rx_frag(nskb, i, page,
> > + frag - page_address(page), size, size);
> > + err = skb_copy_bits(skb, off, frag, size);
> > + if (err) {
> > + consume_skb(nskb);
> > + return err;
> > + }
> > +
> > + len -= size;
> > + off += size;
> > + }
> > +
> > + consume_skb(skb);
> > + *pskb = nskb;
> > + __skb_pull(nskb, mac_len);
> > }
> > - act = bpf_prog_run_generic_xdp(skb, xdp, xdp_prog);
> > + return 0;
> > +}
> > +
> > +static u32 netif_receive_generic_xdp(struct sk_buff **pskb,
> > + struct xdp_buff *xdp,
> > + struct bpf_prog *xdp_prog)
> > +{
> > + u32 act = XDP_DROP;
> > +
> > + /* Reinjected packets coming from act_mirred or similar should
> > + * not get XDP generic processing.
> > + */
> > + if (skb_is_redirected(*pskb))
> > + return XDP_PASS;
> > +
> > + if (netif_skb_check_for_generic_xdp(pskb, xdp_prog))
> > + goto do_drop;
> > +
> > + act = bpf_prog_run_generic_xdp(*pskb, xdp, xdp_prog);
> > switch (act) {
> > case XDP_REDIRECT:
> > case XDP_TX:
> > case XDP_PASS:
> > break;
> > default:
> > - bpf_warn_invalid_xdp_action(skb->dev, xdp_prog, act);
> > + bpf_warn_invalid_xdp_action((*pskb)->dev, xdp_prog, act);
> > fallthrough;
> > case XDP_ABORTED:
> > - trace_xdp_exception(skb->dev, xdp_prog, act);
> > + trace_xdp_exception((*pskb)->dev, xdp_prog, act);
> > fallthrough;
> > case XDP_DROP:
> > do_drop:
> > - kfree_skb(skb);
> > + kfree_skb(*pskb);
> > break;
> > }
>
> Overall I like the patch :-)
>
> Are we missing more things to allow GRO packets getting processed by generic
> XDP?
>
> --Jesper
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
next prev parent reply other threads:[~2023-11-30 10:51 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-30 9:11 [PATCH v2 net-next 0/2] add multi-buff support for xdp running in generic mode Lorenzo Bianconi
2023-11-30 9:11 ` [PATCH v2 net-next 1/2] xdp: rely on skb pointer reference in do_xdp_generic and netif_receive_generic_xdp Lorenzo Bianconi
2023-11-30 9:52 ` Jesper Dangaard Brouer
2023-11-30 9:11 ` [PATCH v2 net-next 2/2] xdp: add multi-buff support for xdp running in generic mode Lorenzo Bianconi
2023-11-30 10:36 ` Jesper Dangaard Brouer
2023-11-30 10:51 ` Lorenzo Bianconi [this message]
2023-11-30 18:49 ` Stanislav Fomichev
2023-12-01 9:33 ` Lorenzo Bianconi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZWhpGWDP6mrM-Y35@lore-desk \
--to=lorenzo@kernel.org \
--cc=bpf@vger.kernel.org \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hawk@kernel.org \
--cc=jasowang@redhat.com \
--cc=kernel-team@cloudflare.com \
--cc=kuba@kernel.org \
--cc=lorenzo.bianconi@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=toke@redhat.com \
--cc=willemdebruijn.kernel@gmail.com \
--cc=yan@cloudflare.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).