From: Hangbin Liu <liuhangbin@gmail.com>
To: Benjamin Poirier <bpoirier@nvidia.com>
Cc: netdev@vger.kernel.org, "David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Shuah Khan <shuah@kernel.org>, Petr Machata <petrm@nvidia.com>,
Nikolay Aleksandrov <razor@blackwall.org>,
Vladimir Oltean <vladimir.oltean@nxp.com>,
Ido Schimmel <idosch@nvidia.com>,
Tobias Waldekranz <tobias@waldekranz.com>,
linux-kselftest@vger.kernel.org
Subject: Re: [PATCH net-next] selftests: forwarding: Avoid failures to source net/lib.sh
Date: Fri, 5 Jan 2024 06:35:45 +0800 [thread overview]
Message-ID: <ZZcywXyDs6rL03Ok@Laptop-X1> (raw)
In-Reply-To: <20240104141109.100672-1-bpoirier@nvidia.com>
On Thu, Jan 04, 2024 at 09:11:09AM -0500, Benjamin Poirier wrote:
> The expression "source ../lib.sh" added to net/forwarding/lib.sh in commit
> 25ae948b4478 ("selftests/net: add lib.sh") does not work for tests outside
> net/forwarding which source net/forwarding/lib.sh (1). It also does not
> work in some cases where only a subset of tests are exported (2).
>
> Avoid the problems mentioned above by replacing the faulty expression with
> a copy of the content from net/lib.sh which is used by files under
> net/forwarding.
>
> A more thorough solution which avoids duplicating content between
> net/lib.sh and net/forwarding/lib.sh has been posted here:
> https://lore.kernel.org/netdev/20231222135836.992841-1-bpoirier@nvidia.com/
>
> The approach in the current patch is a stopgap solution to avoid submitting
> large changes at the eleventh hour of this development cycle.
>
> Example of problem 1)
>
> tools/testing/selftests/drivers/net/bonding$ ./dev_addr_lists.sh
> ./net_forwarding_lib.sh: line 41: ../lib.sh: No such file or directory
> TEST: bonding cleanup mode active-backup [ OK ]
> TEST: bonding cleanup mode 802.3ad [ OK ]
> TEST: bonding LACPDU multicast address to slave (from bond down) [ OK ]
> TEST: bonding LACPDU multicast address to slave (from bond up) [ OK ]
>
> An error message is printed but since the test does not use functions from
> net/lib.sh, the test results are not affected.
>
> Example of problem 2)
>
> tools/testing/selftests$ make install TARGETS="net/forwarding"
> tools/testing/selftests$ cd kselftest_install/net/forwarding/
> tools/testing/selftests/kselftest_install/net/forwarding$ ./pedit_ip.sh veth{0..3}
> lib.sh: line 41: ../lib.sh: No such file or directory
> TEST: ping [ OK ]
> TEST: ping6 [ OK ]
> ./pedit_ip.sh: line 135: busywait: command not found
> TEST: dev veth1 ingress pedit ip src set 198.51.100.1 [FAIL]
> Expected to get 10 packets, but got .
> ./pedit_ip.sh: line 135: busywait: command not found
> TEST: dev veth2 egress pedit ip src set 198.51.100.1 [FAIL]
> Expected to get 10 packets, but got .
> ./pedit_ip.sh: line 135: busywait: command not found
> TEST: dev veth1 ingress pedit ip dst set 198.51.100.1 [FAIL]
> Expected to get 10 packets, but got .
> ./pedit_ip.sh: line 135: busywait: command not found
> TEST: dev veth2 egress pedit ip dst set 198.51.100.1 [FAIL]
> Expected to get 10 packets, but got .
> ./pedit_ip.sh: line 135: busywait: command not found
> TEST: dev veth1 ingress pedit ip6 src set 2001:db8:2::1 [FAIL]
> Expected to get 10 packets, but got .
> ./pedit_ip.sh: line 135: busywait: command not found
> TEST: dev veth2 egress pedit ip6 src set 2001:db8:2::1 [FAIL]
> Expected to get 10 packets, but got .
> ./pedit_ip.sh: line 135: busywait: command not found
> TEST: dev veth1 ingress pedit ip6 dst set 2001:db8:2::1 [FAIL]
> Expected to get 10 packets, but got .
> ./pedit_ip.sh: line 135: busywait: command not found
> TEST: dev veth2 egress pedit ip6 dst set 2001:db8:2::1 [FAIL]
> Expected to get 10 packets, but got .
>
> In this case, the test results are affected.
>
> Fixes: 25ae948b4478 ("selftests/net: add lib.sh")
> Suggested-by: Ido Schimmel <idosch@nvidia.com>
> Suggested-by: Petr Machata <petrm@nvidia.com>
> Reviewed-by: Ido Schimmel <idosch@nvidia.com>
> Tested-by: Petr Machata <petrm@nvidia.com>
> Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
> ---
> tools/testing/selftests/net/forwarding/lib.sh | 27 ++++++++++++++++++-
> 1 file changed, 26 insertions(+), 1 deletion(-)
>
> diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh
> index 69ef2a40df21..8a61464ab6eb 100755
> --- a/tools/testing/selftests/net/forwarding/lib.sh
> +++ b/tools/testing/selftests/net/forwarding/lib.sh
> @@ -38,7 +38,32 @@ if [[ -f $relative_path/forwarding.config ]]; then
> source "$relative_path/forwarding.config"
> fi
>
> -source ../lib.sh
> +# Kselftest framework requirement - SKIP code is 4.
> +ksft_skip=4
> +
> +busywait()
> +{
> + local timeout=$1; shift
> +
> + local start_time="$(date -u +%s%3N)"
> + while true
> + do
> + local out
> + out=$("$@")
> + local ret=$?
> + if ((!ret)); then
> + echo -n "$out"
> + return 0
> + fi
> +
> + local current_time="$(date -u +%s%3N)"
> + if ((current_time - start_time > timeout)); then
> + echo -n "$out"
> + return 1
> + fi
> + done
> +}
> +
> ##############################################################################
> # Sanity checks
>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Thanks
Hangbin
next prev parent reply other threads:[~2024-01-04 22:35 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-04 14:11 [PATCH net-next] selftests: forwarding: Avoid failures to source net/lib.sh Benjamin Poirier
2024-01-04 22:35 ` Hangbin Liu [this message]
2024-01-06 3:40 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZZcywXyDs6rL03Ok@Laptop-X1 \
--to=liuhangbin@gmail.com \
--cc=bpoirier@nvidia.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=idosch@nvidia.com \
--cc=kuba@kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=petrm@nvidia.com \
--cc=razor@blackwall.org \
--cc=shuah@kernel.org \
--cc=tobias@waldekranz.com \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox