Re: [PATCH net-next v7 02/13] net: pse-pd: Add support for reporting events

[Oleksij Rempel <o.rempel@pengutronix.de>]

On Tue, Apr 08, 2025 at 04:32:11PM +0200, Kory Maincent wrote:
> From: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
> 
> Add support for devm_pse_irq_helper() to register PSE interrupts and report
> events such as over-current or over-temperature conditions. This follows a
> similar approach to the regulator API but also sends notifications using a
> dedicated PSE ethtool netlink socket.
> 
> Introduce an attached_phydev field in the pse_control structure to store
> the phydev attached to the PSE PI, ensuring that PSE ethtool notifications
> are sent to the correct network interface.
> 
> The attached_phydev pointer is directly tied to the PHY lifecycle. It
> is set when the PHY is registered and cleared when the PHY is removed.
> There is no need to use a refcount, as doing so could interfere with
> the PHY removal process.
> 
> Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>

Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>

Thank you!

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |