Re: [iwl-next v1 07/15] ice: add auxiliary device sfnum attribute

[Jiri Pirko <jiri@resnulli.us>]

Tue, Feb 13, 2024 at 10:53:50AM CET, michal.swiatkowski@linux.intel.com wrote:
>On Tue, Feb 13, 2024 at 09:59:14AM +0100, Jiri Pirko wrote:
>> Tue, Feb 13, 2024 at 08:27:16AM CET, michal.swiatkowski@linux.intel.com wrote:
>> >From: Piotr Raczynski <piotr.raczynski@intel.com>
>> >
>> >Add read only sysfs attribute for each auxiliary subfunction
>> >device. This attribute is needed for orchestration layer
>> >to distinguish SF devices from each other since there is no
>> >native devlink mechanism to represent the connection between
>> >devlink instance and the devlink port created for the port
>> >representor.
>> >
>> >Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
>> >Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
>> >Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
>> >---
>> > drivers/net/ethernet/intel/ice/ice_sf_eth.c | 31 +++++++++++++++++++++
>> > 1 file changed, 31 insertions(+)
>> >
>> >diff --git a/drivers/net/ethernet/intel/ice/ice_sf_eth.c b/drivers/net/ethernet/intel/ice/ice_sf_eth.c
>> >index ab90db52a8fc..abee733710a5 100644
>> >--- a/drivers/net/ethernet/intel/ice/ice_sf_eth.c
>> >+++ b/drivers/net/ethernet/intel/ice/ice_sf_eth.c
>> >@@ -224,6 +224,36 @@ static void ice_sf_dev_release(struct device *device)
>> > 	kfree(sf_dev);
>> > }
>> > 
>> >+static ssize_t
>> >+sfnum_show(struct device *dev, struct device_attribute *attr, char *buf)
>> >+{
>> >+	struct devlink_port_attrs *attrs;
>> >+	struct auxiliary_device *adev;
>> >+	struct ice_sf_dev *sf_dev;
>> >+
>> >+	adev = to_auxiliary_dev(dev);
>> >+	sf_dev = ice_adev_to_sf_dev(adev);
>> >+	attrs = &sf_dev->dyn_port->devlink_port.attrs;
>> >+
>> >+	return sysfs_emit(buf, "%u\n", attrs->pci_sf.sf);
>> >+}
>> >+
>> >+static DEVICE_ATTR_RO(sfnum);
>> >+
>> >+static struct attribute *ice_sf_device_attrs[] = {
>> >+	&dev_attr_sfnum.attr,
>> >+	NULL,
>> >+};
>> >+
>> >+static const struct attribute_group ice_sf_attr_group = {
>> >+	.attrs = ice_sf_device_attrs,
>> >+};
>> >+
>> >+static const struct attribute_group *ice_sf_attr_groups[2] = {
>> >+	&ice_sf_attr_group,
>> >+	NULL
>> >+};
>> >+
>> > /**
>> >  * ice_sf_eth_activate - Activate Ethernet subfunction port
>> >  * @dyn_port: the dynamic port instance for this subfunction
>> >@@ -262,6 +292,7 @@ ice_sf_eth_activate(struct ice_dynamic_port *dyn_port,
>> > 	sf_dev->dyn_port = dyn_port;
>> > 	sf_dev->adev.id = id;
>> > 	sf_dev->adev.name = "sf";
>> >+	sf_dev->adev.dev.groups = ice_sf_attr_groups;
>> 
>> Ugh. Custom driver sysfs files like this are always very questionable.
>> Don't do that please. If you need to expose sfnum, please think about
>> some common way. Why exactly you need to expose it?
>
>Uh, hard question. I will drop it and check if it still needed to expose
>the sfnum, probably no, as I have never used this sysfs during testing.
>
>Should devlink be used for it?

sfnum is exposed over devlink on the port representor. If you need to
expose it on the actual SF, we have to figure it out. But again, why?


>
>Thanks
>
>> 
>> pw-bot: cr
>> 
>> 
>> > 	sf_dev->adev.dev.release = ice_sf_dev_release;
>> > 	sf_dev->adev.dev.parent = &pdev->dev;
>> > 
>> >-- 
>> >2.42.0
>> >
>> >