[PATCH net-next v5] bonding: rate-limit bonding driver inspect messages

[PATCH net-next v5] bonding: rate-limit bonding driver inspect messages

[Praveen Kumar Kannoju]

Through the routine bond_mii_monitor(), bonding driver inspects and commits
the slave state changes. During the times when slave state change and
failure in aqcuiring rtnl lock happen at the same time, the routine
bond_mii_monitor() reschedules itself to come around after 1 msec to commit
the new state.

During this, it executes the routine bond_miimon_inspect() to re-inspect
the state chane and prints the corresponding slave state on to the console.
Hence we do see a message at every 1 msec till the rtnl lock is acquired
and state chage is committed.

This patch doesn't change how bond functions. It only simply limits this
kind of log flood.

Signed-off-by: Praveen Kumar Kannoju <praveen.kannoju@oracle.com>
---
v5:
  - Redundant indentation addressed.
v4: https://lore.kernel.org/all/20240220050437.5623-1-praveen.kannoju@oracle.com/
  - Rectification in the patch subject and versioning details.
v3: https://lore.kernel.org/lkml/20240219133721.4567-1-praveen.kannoju@oracle.com/
  - Commit message is modified to provide summary of the issue, because of
    which rate-limiting the bonding driver messages is needed.
v2: https://lore.kernel.org/lkml/20240215172554.4211-1-praveen.kannoju@oracle.com/
  - Use exising net_ratelimit() instead of introducing new rate-limit
    parameter.
v1: https://lore.kernel.org/lkml/20240214044245.33170-1-praveen.kannoju@oracle.com/
---
 drivers/net/bonding/bond_main.c | 24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 4e0600c..c8482cd 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2609,12 +2609,12 @@ static int bond_miimon_inspect(struct bonding *bond)
 			bond_propose_link_state(slave, BOND_LINK_FAIL);
 			commit++;
 			slave->delay = bond->params.downdelay;
-			if (slave->delay) {
+			if (slave->delay && net_ratelimit()) {
 				slave_info(bond->dev, slave->dev, "link status down for %sinterface, disabling it in %d ms\n",
 					   (BOND_MODE(bond) ==
-					    BOND_MODE_ACTIVEBACKUP) ?
-					    (bond_is_active_slave(slave) ?
-					     "active " : "backup ") : "",
+					   BOND_MODE_ACTIVEBACKUP) ?
+					   (bond_is_active_slave(slave) ?
+					   "active " : "backup ") : "",
 					   bond->params.downdelay * bond->params.miimon);
 			}
 			fallthrough;
@@ -2623,9 +2623,10 @@ static int bond_miimon_inspect(struct bonding *bond)
 				/* recovered before downdelay expired */
 				bond_propose_link_state(slave, BOND_LINK_UP);
 				slave->last_link_up = jiffies;
-				slave_info(bond->dev, slave->dev, "link status up again after %d ms\n",
-					   (bond->params.downdelay - slave->delay) *
-					   bond->params.miimon);
+				if (net_ratelimit())
+					slave_info(bond->dev, slave->dev, "link status up again after %d ms\n",
+						   (bond->params.downdelay - slave->delay) *
+						   bond->params.miimon);
 				commit++;
 				continue;
 			}
@@ -2647,7 +2648,7 @@ static int bond_miimon_inspect(struct bonding *bond)
 			commit++;
 			slave->delay = bond->params.updelay;
 
-			if (slave->delay) {
+			if (slave->delay && net_ratelimit()) {
 				slave_info(bond->dev, slave->dev, "link status up, enabling it in %d ms\n",
 					   ignore_updelay ? 0 :
 					   bond->params.updelay *
@@ -2657,9 +2658,10 @@ static int bond_miimon_inspect(struct bonding *bond)
 		case BOND_LINK_BACK:
 			if (!link_state) {
 				bond_propose_link_state(slave, BOND_LINK_DOWN);
-				slave_info(bond->dev, slave->dev, "link status down again after %d ms\n",
-					   (bond->params.updelay - slave->delay) *
-					   bond->params.miimon);
+				if (net_ratelimit())
+					slave_info(bond->dev, slave->dev, "link status down again after %d ms\n",
+						   (bond->params.updelay - slave->delay) *
+						   bond->params.miimon);
 				commit++;
 				continue;
 			}
-- 
1.8.3.1

Re: [PATCH net-next v5] bonding: rate-limit bonding driver inspect messages

[Hangbin Liu]

On Wed, Feb 21, 2024 at 10:38:09AM +0530, Praveen Kumar Kannoju wrote:
> Through the routine bond_mii_monitor(), bonding driver inspects and commits
> the slave state changes. During the times when slave state change and
> failure in aqcuiring rtnl lock happen at the same time, the routine
> bond_mii_monitor() reschedules itself to come around after 1 msec to commit
> the new state.
> 
> During this, it executes the routine bond_miimon_inspect() to re-inspect
> the state chane and prints the corresponding slave state on to the console.
> Hence we do see a message at every 1 msec till the rtnl lock is acquired
> and state chage is committed.
> 
> This patch doesn't change how bond functions. It only simply limits this
> kind of log flood.
> 
> Signed-off-by: Praveen Kumar Kannoju <praveen.kannoju@oracle.com>
> ---
> v5:
>   - Redundant indentation addressed.
> v4: https://lore.kernel.org/all/20240220050437.5623-1-praveen.kannoju@oracle.com/
>   - Rectification in the patch subject and versioning details.
> v3: https://lore.kernel.org/lkml/20240219133721.4567-1-praveen.kannoju@oracle.com/
>   - Commit message is modified to provide summary of the issue, because of
>     which rate-limiting the bonding driver messages is needed.
> v2: https://lore.kernel.org/lkml/20240215172554.4211-1-praveen.kannoju@oracle.com/
>   - Use exising net_ratelimit() instead of introducing new rate-limit
>     parameter.
> v1: https://lore.kernel.org/lkml/20240214044245.33170-1-praveen.kannoju@oracle.com/
> ---
>  drivers/net/bonding/bond_main.c | 24 +++++++++++++-----------
>  1 file changed, 13 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
> index 4e0600c..c8482cd 100644
> --- a/drivers/net/bonding/bond_main.c
> +++ b/drivers/net/bonding/bond_main.c
> @@ -2609,12 +2609,12 @@ static int bond_miimon_inspect(struct bonding *bond)
>  			bond_propose_link_state(slave, BOND_LINK_FAIL);
>  			commit++;
>  			slave->delay = bond->params.downdelay;
> -			if (slave->delay) {
> +			if (slave->delay && net_ratelimit()) {
>  				slave_info(bond->dev, slave->dev, "link status down for %sinterface, disabling it in %d ms\n",
>  					   (BOND_MODE(bond) ==
> -					    BOND_MODE_ACTIVEBACKUP) ?
> -					    (bond_is_active_slave(slave) ?
> -					     "active " : "backup ") : "",
> +					   BOND_MODE_ACTIVEBACKUP) ?
> +					   (bond_is_active_slave(slave) ?
> +					   "active " : "backup ") : "",

Why these lines changed?

Hangbin

RE: [PATCH net-next v5] bonding: rate-limit bonding driver inspect messages

[Praveen Kannoju]

> -----Original Message-----
> From: Hangbin Liu <liuhangbin@gmail.com>
> Sent: 21 February 2024 01:21 PM
> To: Praveen Kannoju <praveen.kannoju@oracle.com>
> Cc: j.vosburgh@gmail.com; andy@greyhouse.net; davem@davemloft.net; edumazet@google.com; kuba@kernel.org;
> pabeni@redhat.com; netdev@vger.kernel.org; linux-kernel@vger.kernel.org; Rajesh Sivaramasubramaniom
> <rajesh.sivaramasubramaniom@oracle.com>; Rama Nichanamatlu <rama.nichanamatlu@oracle.com>; Manjunath Patil
> <manjunath.b.patil@oracle.com>
> Subject: Re: [PATCH net-next v5] bonding: rate-limit bonding driver inspect messages
> 
> On Wed, Feb 21, 2024 at 10:38:09AM +0530, Praveen Kumar Kannoju wrote:
> > Through the routine bond_mii_monitor(), bonding driver inspects and
> > commits the slave state changes. During the times when slave state
> > change and failure in aqcuiring rtnl lock happen at the same time, the
> > routine
> > bond_mii_monitor() reschedules itself to come around after 1 msec to
> > commit the new state.
> >
> > During this, it executes the routine bond_miimon_inspect() to
> > re-inspect the state chane and prints the corresponding slave state on to the console.
> > Hence we do see a message at every 1 msec till the rtnl lock is
> > acquired and state chage is committed.
> >
> > This patch doesn't change how bond functions. It only simply limits
> > this kind of log flood.
> >
> > Signed-off-by: Praveen Kumar Kannoju <praveen.kannoju@oracle.com>
> > ---
> > v5:
> >   - Redundant indentation addressed.
> > v4: https://lore.kernel.org/all/20240220050437.5623-1-praveen.kannoju@oracle.com/
> >   - Rectification in the patch subject and versioning details.
> > v3: https://lore.kernel.org/lkml/20240219133721.4567-1-praveen.kannoju@oracle.com/
> >   - Commit message is modified to provide summary of the issue, because of
> >     which rate-limiting the bonding driver messages is needed.
> > v2: https://lore.kernel.org/lkml/20240215172554.4211-1-praveen.kannoju@oracle.com/
> >   - Use exising net_ratelimit() instead of introducing new rate-limit
> >     parameter.
> > v1:
> > https://lore.kernel.org/lkml/20240214044245.33170-1-praveen.kannoju@or
> > acle.com/
> > ---
> >  drivers/net/bonding/bond_main.c | 24 +++++++++++++-----------
> >  1 file changed, 13 insertions(+), 11 deletions(-)
> >
> > diff --git a/drivers/net/bonding/bond_main.c
> > b/drivers/net/bonding/bond_main.c index 4e0600c..c8482cd 100644
> > --- a/drivers/net/bonding/bond_main.c
> > +++ b/drivers/net/bonding/bond_main.c
> > @@ -2609,12 +2609,12 @@ static int bond_miimon_inspect(struct bonding *bond)
> >  			bond_propose_link_state(slave, BOND_LINK_FAIL);
> >  			commit++;
> >  			slave->delay = bond->params.downdelay;
> > -			if (slave->delay) {
> > +			if (slave->delay && net_ratelimit()) {
> >  				slave_info(bond->dev, slave->dev, "link status down for %sinterface, disabling it in %d ms\n",
> >  					   (BOND_MODE(bond) ==
> > -					    BOND_MODE_ACTIVEBACKUP) ?
> > -					    (bond_is_active_slave(slave) ?
> > -					     "active " : "backup ") : "",
> > +					   BOND_MODE_ACTIVEBACKUP) ?
> > +					   (bond_is_active_slave(slave) ?
> > +					   "active " : "backup ") : "",
> 
> Why these lines changed?
> 
> Hangbin

Must be a editing mistake from my-end, Hangbin. 
Addressed it. 

-
Praveen.