From: Yury Norov <yury.norov@gmail.com>
To: Herve Codina <herve.codina@bootlin.com>
Cc: Vadim Fedorenko <vadim.fedorenko@linux.dev>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Rasmus Villemoes <linux@rasmusvillemoes.dk>,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
linuxppc-dev@lists.ozlabs.org, Andrew Lunn <andrew@lunn.ch>,
Mark Brown <broonie@kernel.org>,
Christophe Leroy <christophe.leroy@csgroup.eu>,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Subject: Re: [PATCH v6 4/5] net: wan: fsl_qmc_hdlc: Add runtime timeslots changes support
Date: Wed, 6 Mar 2024 05:06:12 -0800 [thread overview]
Message-ID: <ZehqRMZwtazTf6P6@yury-ThinkPad> (raw)
In-Reply-To: <20240306080726.167338-5-herve.codina@bootlin.com>
On Wed, Mar 06, 2024 at 09:07:20AM +0100, Herve Codina wrote:
> QMC channels support runtime timeslots changes but nothing is done at
> the QMC HDLC driver to handle these changes.
>
> Use existing IFACE ioctl in order to configure the timeslots to use.
>
> Signed-off-by: Herve Codina <herve.codina@bootlin.com>
> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
> Acked-by: Jakub Kicinski <kuba@kernel.org>
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
> drivers/net/wan/fsl_qmc_hdlc.c | 151 ++++++++++++++++++++++++++++++++-
> 1 file changed, 150 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/wan/fsl_qmc_hdlc.c b/drivers/net/wan/fsl_qmc_hdlc.c
> index 90063a92209e..31c0f32474a3 100644
> --- a/drivers/net/wan/fsl_qmc_hdlc.c
> +++ b/drivers/net/wan/fsl_qmc_hdlc.c
> @@ -10,6 +10,7 @@
> #include <linux/array_size.h>
> #include <linux/bug.h>
> #include <linux/cleanup.h>
> +#include <linux/bitmap.h>
> #include <linux/dma-mapping.h>
> #include <linux/device.h>
> #include <linux/err.h>
> @@ -39,6 +40,7 @@ struct qmc_hdlc {
> struct qmc_hdlc_desc tx_descs[8];
> unsigned int tx_out;
> struct qmc_hdlc_desc rx_descs[4];
> + u32 slot_map;
> };
>
> static struct qmc_hdlc *netdev_to_qmc_hdlc(struct net_device *netdev)
> @@ -203,6 +205,144 @@ static netdev_tx_t qmc_hdlc_xmit(struct sk_buff *skb, struct net_device *netdev)
> return NETDEV_TX_OK;
> }
>
> +static int qmc_hdlc_xlate_slot_map(struct qmc_hdlc *qmc_hdlc,
> + u32 slot_map, struct qmc_chan_ts_info *ts_info)
> +{
> + DECLARE_BITMAP(ts_mask_avail, 64);
> + DECLARE_BITMAP(ts_mask, 64);
> + DECLARE_BITMAP(map, 64);
> +
> + /* Tx and Rx available masks must be identical */
> + if (ts_info->rx_ts_mask_avail != ts_info->tx_ts_mask_avail) {
> + dev_err(qmc_hdlc->dev, "tx and rx available timeslots mismatch (0x%llx, 0x%llx)\n",
> + ts_info->rx_ts_mask_avail, ts_info->tx_ts_mask_avail);
> + return -EINVAL;
> + }
> +
> + bitmap_from_u64(ts_mask_avail, ts_info->rx_ts_mask_avail);
> + bitmap_from_u64(map, slot_map);
> + bitmap_scatter(ts_mask, map, ts_mask_avail, 64);
We've got a BITMAP_FROM_U64() for this:
DECLARE_BITMAP(ts_mask_avail, 64) = { BITMAP_FROM_U64(ts_info->rx_ts_mask_avail) };
DECLARE_BITMAP(map, 64) = { BITMAP_FROM_U64(slot_map) };
> +
> + if (bitmap_weight(ts_mask, 64) != bitmap_weight(map, 64)) {
> + dev_err(qmc_hdlc->dev, "Cannot translate timeslots %64pb -> (%64pb, %64pb)\n",
> + map, ts_mask_avail, ts_mask);
> + return -EINVAL;
> + }
> +
> + bitmap_to_arr64(&ts_info->tx_ts_mask, ts_mask, 64);
> + ts_info->rx_ts_mask = ts_info->tx_ts_mask;
> + return 0;
> +}
> +
> +static int qmc_hdlc_xlate_ts_info(struct qmc_hdlc *qmc_hdlc,
> + const struct qmc_chan_ts_info *ts_info, u32 *slot_map)
> +{
> + DECLARE_BITMAP(ts_mask_avail, 64);
> + DECLARE_BITMAP(ts_mask, 64);
> + DECLARE_BITMAP(map, 64);
> + u32 array32[2];
NIT. Bad name. I'd suggest slot_array, or something.
> + /* Tx and Rx masks and available masks must be identical */
> + if (ts_info->rx_ts_mask_avail != ts_info->tx_ts_mask_avail) {
> + dev_err(qmc_hdlc->dev, "tx and rx available timeslots mismatch (0x%llx, 0x%llx)\n",
> + ts_info->rx_ts_mask_avail, ts_info->tx_ts_mask_avail);
> + return -EINVAL;
> + }
> + if (ts_info->rx_ts_mask != ts_info->tx_ts_mask) {
> + dev_err(qmc_hdlc->dev, "tx and rx timeslots mismatch (0x%llx, 0x%llx)\n",
> + ts_info->rx_ts_mask, ts_info->tx_ts_mask);
> + return -EINVAL;
> + }
> +
> + bitmap_from_u64(ts_mask_avail, ts_info->rx_ts_mask_avail);
> + bitmap_from_u64(ts_mask, ts_info->rx_ts_mask);
Same as above, can you try using BITMAP_FROM_U64()?
Thanks,
Yury
> + bitmap_gather(map, ts_mask, ts_mask_avail, 64);
> +
> + if (bitmap_weight(ts_mask, 64) != bitmap_weight(map, 64)) {
> + dev_err(qmc_hdlc->dev, "Cannot translate timeslots (%64pb, %64pb) -> %64pb\n",
> + ts_mask_avail, ts_mask, map);
> + return -EINVAL;
> + }
> +
> + bitmap_to_arr32(array32, map, 64);
> + if (array32[1]) {
> + dev_err(qmc_hdlc->dev, "Slot map out of 32bit (%64pb, %64pb) -> %64pb\n",
> + ts_mask_avail, ts_mask, map);
> + return -EINVAL;
> + }
> +
> + *slot_map = array32[0];
> + return 0;
> +}
> +
> +static int qmc_hdlc_set_iface(struct qmc_hdlc *qmc_hdlc, int if_iface, const te1_settings *te1)
> +{
> + struct qmc_chan_ts_info ts_info;
> + int ret;
> +
> + ret = qmc_chan_get_ts_info(qmc_hdlc->qmc_chan, &ts_info);
> + if (ret) {
> + dev_err(qmc_hdlc->dev, "get QMC channel ts info failed %d\n", ret);
> + return ret;
> + }
> + ret = qmc_hdlc_xlate_slot_map(qmc_hdlc, te1->slot_map, &ts_info);
> + if (ret)
> + return ret;
> +
> + ret = qmc_chan_set_ts_info(qmc_hdlc->qmc_chan, &ts_info);
> + if (ret) {
> + dev_err(qmc_hdlc->dev, "set QMC channel ts info failed %d\n", ret);
> + return ret;
> + }
> +
> + qmc_hdlc->slot_map = te1->slot_map;
> +
> + return 0;
> +}
> +
> +static int qmc_hdlc_ioctl(struct net_device *netdev, struct if_settings *ifs)
> +{
> + struct qmc_hdlc *qmc_hdlc = netdev_to_qmc_hdlc(netdev);
> + te1_settings te1;
> +
> + switch (ifs->type) {
> + case IF_GET_IFACE:
> + ifs->type = IF_IFACE_E1;
> + if (ifs->size < sizeof(te1)) {
> + if (!ifs->size)
> + return 0; /* only type requested */
> +
> + ifs->size = sizeof(te1); /* data size wanted */
> + return -ENOBUFS;
> + }
> +
> + memset(&te1, 0, sizeof(te1));
> +
> + /* Update slot_map */
> + te1.slot_map = qmc_hdlc->slot_map;
> +
> + if (copy_to_user(ifs->ifs_ifsu.te1, &te1, sizeof(te1)))
> + return -EFAULT;
> + return 0;
> +
> + case IF_IFACE_E1:
> + case IF_IFACE_T1:
> + if (!capable(CAP_NET_ADMIN))
> + return -EPERM;
> +
> + if (netdev->flags & IFF_UP)
> + return -EBUSY;
> +
> + if (copy_from_user(&te1, ifs->ifs_ifsu.te1, sizeof(te1)))
> + return -EFAULT;
> +
> + return qmc_hdlc_set_iface(qmc_hdlc, ifs->type, &te1);
> +
> + default:
> + return hdlc_ioctl(netdev, ifs);
> + }
> +}
> +
> static int qmc_hdlc_open(struct net_device *netdev)
> {
> struct qmc_hdlc *qmc_hdlc = netdev_to_qmc_hdlc(netdev);
> @@ -326,12 +466,13 @@ static const struct net_device_ops qmc_hdlc_netdev_ops = {
> .ndo_open = qmc_hdlc_open,
> .ndo_stop = qmc_hdlc_close,
> .ndo_start_xmit = hdlc_start_xmit,
> - .ndo_siocwandev = hdlc_ioctl,
> + .ndo_siocwandev = qmc_hdlc_ioctl,
> };
>
> static int qmc_hdlc_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> + struct qmc_chan_ts_info ts_info;
> struct qmc_hdlc *qmc_hdlc;
> struct qmc_chan_info info;
> hdlc_device *hdlc;
> @@ -357,6 +498,14 @@ static int qmc_hdlc_probe(struct platform_device *pdev)
> return dev_err_probe(dev, -EINVAL, "QMC chan mode %d is not QMC_HDLC\n",
> info.mode);
>
> + ret = qmc_chan_get_ts_info(qmc_hdlc->qmc_chan, &ts_info);
> + if (ret)
> + return dev_err_probe(dev, ret, "get QMC channel ts info failed\n");
> +
> + ret = qmc_hdlc_xlate_ts_info(qmc_hdlc, &ts_info, &qmc_hdlc->slot_map);
> + if (ret)
> + return ret;
> +
> qmc_hdlc->netdev = alloc_hdlcdev(qmc_hdlc);
> if (!qmc_hdlc->netdev)
> return -ENOMEM;
> --
> 2.43.0
next prev parent reply other threads:[~2024-03-06 13:06 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-06 8:07 [PATCH v6 0/5] Add support for QMC HDLC Herve Codina
2024-03-06 8:07 ` [PATCH v6 1/5] net: wan: " Herve Codina
2024-03-06 10:56 ` Ratheesh Kannoth
2024-03-06 13:37 ` Herve Codina
2024-03-06 16:01 ` [EXTERNAL] " Ratheesh Kannoth
2024-03-06 16:22 ` Jakub Kicinski
2024-03-06 17:46 ` Herve Codina
2024-03-06 17:52 ` Jakub Kicinski
2024-03-06 13:27 ` Yury Norov
2024-03-06 13:38 ` Andy Shevchenko
2024-03-06 16:22 ` Jakub Kicinski
2024-03-06 8:07 ` [PATCH v6 2/5] MAINTAINERS: Add the Freescale QMC HDLC driver entry Herve Codina
2024-03-06 8:07 ` [PATCH v6 3/5] lib/bitmap: Introduce bitmap_scatter() and bitmap_gather() helpers Herve Codina
2024-03-06 13:11 ` Yury Norov
2024-03-06 13:39 ` Andy Shevchenko
2024-03-07 7:31 ` Herve Codina
2024-03-06 8:07 ` [PATCH v6 4/5] net: wan: fsl_qmc_hdlc: Add runtime timeslots changes support Herve Codina
2024-03-06 13:06 ` Yury Norov [this message]
2024-03-06 13:43 ` Andy Shevchenko
2024-03-06 15:43 ` Herve Codina
2024-03-06 15:55 ` Andy Shevchenko
2024-03-07 7:26 ` Herve Codina
2024-03-06 8:07 ` [PATCH v6 5/5] net: wan: fsl_qmc_hdlc: Add framer support Herve Codina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZehqRMZwtazTf6P6@yury-ThinkPad \
--to=yury.norov@gmail.com \
--cc=andrew@lunn.ch \
--cc=andriy.shevchenko@linux.intel.com \
--cc=broonie@kernel.org \
--cc=christophe.leroy@csgroup.eu \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=herve.codina@bootlin.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@rasmusvillemoes.dk \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=vadim.fedorenko@linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).