From: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
To: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org, marcin.szycik@intel.com,
sridhar.samudrala@intel.com, wojciech.drewek@intel.com,
pmenzel@molgen.mpg.de,
Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Subject: Re: [iwl-next v2 2/2] ice: tc: allow ip_proto matching
Date: Thu, 14 Mar 2024 12:03:41 +0100 [thread overview]
Message-ID: <ZfLZjUZiQwJzJ445@mev-dev> (raw)
In-Reply-To: <20240222123956.2393-3-michal.swiatkowski@linux.intel.com>
On Thu, Feb 22, 2024 at 01:39:56PM +0100, Michal Swiatkowski wrote:
> Add new matching type for ip_proto.
>
> Use it in the same lookup type as for TTL. In hardware it has the same
> protocol ID, but different offset.
>
> Example command to add filter with ip_proto:
> $tc filter add dev eth10 ingress protocol ip flower ip_proto icmp \
> skip_sw action mirred egress redirect dev eth0
>
> Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
> ---
> drivers/net/ethernet/intel/ice/ice_tc_lib.c | 17 +++++++++++++++--
> drivers/net/ethernet/intel/ice/ice_tc_lib.h | 1 +
> 2 files changed, 16 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ethernet/intel/ice/ice_tc_lib.c b/drivers/net/ethernet/intel/ice/ice_tc_lib.c
> index 49ed5fd7db10..f7c0f62fb730 100644
> --- a/drivers/net/ethernet/intel/ice/ice_tc_lib.c
> +++ b/drivers/net/ethernet/intel/ice/ice_tc_lib.c
> @@ -78,7 +78,8 @@ ice_tc_count_lkups(u32 flags, struct ice_tc_flower_lyr_2_4_hdrs *headers,
> ICE_TC_FLWR_FIELD_DEST_IPV6 | ICE_TC_FLWR_FIELD_SRC_IPV6))
> lkups_cnt++;
>
> - if (flags & (ICE_TC_FLWR_FIELD_IP_TOS | ICE_TC_FLWR_FIELD_IP_TTL))
> + if (flags & (ICE_TC_FLWR_FIELD_IP_TOS | ICE_TC_FLWR_FIELD_IP_TTL |
> + ICE_TC_FLWR_FIELD_IP_PROTO))
> lkups_cnt++;
There is an issue here. In case of ipv6 it shouldn't be count as there is no
support for next header in ipv6.
Example command to reproduce the problem:
tc filter add dev eth0 ingress protocol ipv6 prio 103 flower skip_sw \
dst_mac fa:16:3e:13:e9:a1 ip_proto udp src_port 547 dst_port 546 \
dst_ip fe80::/64 action drop
Filter won't be added because of mismatch between filled and counted
lookups.
I will send v3 with fix.
Thanks,
Michal
>
> /* are L2TPv3 options specified? */
> @@ -530,7 +531,8 @@ ice_tc_fill_rules(struct ice_hw *hw, u32 flags,
> }
>
> if (headers->l2_key.n_proto == htons(ETH_P_IP) &&
> - (flags & (ICE_TC_FLWR_FIELD_IP_TOS | ICE_TC_FLWR_FIELD_IP_TTL))) {
> + (flags & (ICE_TC_FLWR_FIELD_IP_TOS | ICE_TC_FLWR_FIELD_IP_TTL |
> + ICE_TC_FLWR_FIELD_IP_PROTO))) {
> list[i].type = ice_proto_type_from_ipv4(inner);
>
> if (flags & ICE_TC_FLWR_FIELD_IP_TOS) {
> @@ -545,6 +547,13 @@ ice_tc_fill_rules(struct ice_hw *hw, u32 flags,
> headers->l3_mask.ttl;
> }
>
> + if (flags & ICE_TC_FLWR_FIELD_IP_PROTO) {
> + list[i].h_u.ipv4_hdr.protocol =
> + headers->l3_key.ip_proto;
> + list[i].m_u.ipv4_hdr.protocol =
> + headers->l3_mask.ip_proto;
> + }
> +
> i++;
> }
>
> @@ -1515,7 +1524,11 @@ ice_parse_cls_flower(struct net_device *filter_dev, struct ice_vsi *vsi,
>
> headers->l2_key.n_proto = cpu_to_be16(n_proto_key);
> headers->l2_mask.n_proto = cpu_to_be16(n_proto_mask);
> +
> + if (match.key->ip_proto)
> + fltr->flags |= ICE_TC_FLWR_FIELD_IP_PROTO;
> headers->l3_key.ip_proto = match.key->ip_proto;
> + headers->l3_mask.ip_proto = match.mask->ip_proto;
> }
>
> if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_ETH_ADDRS)) {
> diff --git a/drivers/net/ethernet/intel/ice/ice_tc_lib.h b/drivers/net/ethernet/intel/ice/ice_tc_lib.h
> index 65d387163a46..856f371d0687 100644
> --- a/drivers/net/ethernet/intel/ice/ice_tc_lib.h
> +++ b/drivers/net/ethernet/intel/ice/ice_tc_lib.h
> @@ -34,6 +34,7 @@
> #define ICE_TC_FLWR_FIELD_VLAN_PRIO BIT(27)
> #define ICE_TC_FLWR_FIELD_CVLAN_PRIO BIT(28)
> #define ICE_TC_FLWR_FIELD_VLAN_TPID BIT(29)
> +#define ICE_TC_FLWR_FIELD_IP_PROTO BIT(30)
>
> #define ICE_TC_FLOWER_MASK_32 0xFFFFFFFF
>
> --
> 2.42.0
>
prev parent reply other threads:[~2024-03-14 11:03 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-22 12:39 [iwl-next v2 0/2] ice: extend tc flower offload Michal Swiatkowski
2024-02-22 12:39 ` [iwl-next v2 1/2] ice: tc: check src_vsi in case of traffic from VF Michal Swiatkowski
2024-02-26 13:34 ` Simon Horman
2024-03-14 10:59 ` Michal Swiatkowski
2024-03-08 7:39 ` [Intel-wired-lan] " Buvaneswaran, Sujai
2024-02-22 12:39 ` [iwl-next v2 2/2] ice: tc: allow ip_proto matching Michal Swiatkowski
2024-02-26 13:33 ` Simon Horman
2024-03-08 7:40 ` [Intel-wired-lan] " Buvaneswaran, Sujai
2024-03-14 11:03 ` Michal Swiatkowski [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZfLZjUZiQwJzJ445@mev-dev \
--to=michal.swiatkowski@linux.intel.com \
--cc=intel-wired-lan@lists.osuosl.org \
--cc=jedrzej.jagielski@intel.com \
--cc=marcin.szycik@intel.com \
--cc=netdev@vger.kernel.org \
--cc=pmenzel@molgen.mpg.de \
--cc=sridhar.samudrala@intel.com \
--cc=wojciech.drewek@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox