From: Oleksij Rempel <o.rempel@pengutronix.de>
To: "David S. Miller" <davem@davemloft.net>,
Andrew Lunn <andrew@lunn.ch>, Eric Dumazet <edumazet@google.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Vladimir Oltean <olteanv@gmail.com>,
Woojung Huh <woojung.huh@microchip.com>,
Arun Ramadoss <arun.ramadoss@microchip.com>
Cc: UNGLinuxDriver@microchip.com, linux-kernel@vger.kernel.org,
kernel@pengutronix.de, netdev@vger.kernel.org
Subject: Re: [PATCH net-next v1 1/1] net: dsa: microchip: add regmap_range for KSZ9563 chip
Date: Thu, 27 Jun 2024 14:43:37 +0200 [thread overview]
Message-ID: <Zn1eeYwYgU2ocWHz@pengutronix.de> (raw)
In-Reply-To: <20240627123911.227480-1-o.rempel@pengutronix.de>
Please ignore this patch, it was send by accident.
On Thu, Jun 27, 2024 at 02:39:08PM +0200, Oleksij Rempel wrote:
> Add register validation for KSZ9563.
>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
> drivers/net/dsa/microchip/ksz_common.c | 121 +++++++++++++++++++++++++
> 1 file changed, 121 insertions(+)
>
> diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
> index 030b167764b39..2308be3bdc9d8 100644
> --- a/drivers/net/dsa/microchip/ksz_common.c
> +++ b/drivers/net/dsa/microchip/ksz_common.c
> @@ -666,6 +666,125 @@ static const struct regmap_access_table ksz8563_register_set = {
> .n_yes_ranges = ARRAY_SIZE(ksz8563_valid_regs),
> };
>
> +static const struct regmap_range ksz9563_valid_regs[] = {
> + regmap_reg_range(0x0000, 0x0003),
> + regmap_reg_range(0x0006, 0x0006),
> + regmap_reg_range(0x000f, 0x000f),
> + regmap_reg_range(0x0010, 0x001f),
> + regmap_reg_range(0x0100, 0x0100),
> + regmap_reg_range(0x0104, 0x0107),
> + regmap_reg_range(0x010d, 0x010d),
> + regmap_reg_range(0x0110, 0x0113),
> + regmap_reg_range(0x0120, 0x012b),
> + regmap_reg_range(0x0201, 0x0201),
> + regmap_reg_range(0x0210, 0x0213),
> + regmap_reg_range(0x0300, 0x0300),
> + regmap_reg_range(0x0302, 0x030b),
> + regmap_reg_range(0x030e, 0x031b),
> + regmap_reg_range(0x0320, 0x032b),
> + regmap_reg_range(0x0330, 0x0336),
> + regmap_reg_range(0x0338, 0x033b),
> + regmap_reg_range(0x033e, 0x033e),
> + regmap_reg_range(0x0340, 0x035f),
> + regmap_reg_range(0x0370, 0x0370),
> + regmap_reg_range(0x0378, 0x0378),
> + regmap_reg_range(0x037c, 0x037d),
> + regmap_reg_range(0x0390, 0x0393),
> + regmap_reg_range(0x0400, 0x040e),
> + regmap_reg_range(0x0410, 0x042f),
> + regmap_reg_range(0x0500, 0x0519),
> + regmap_reg_range(0x0520, 0x054b),
> + regmap_reg_range(0x0550, 0x05b3),
> +
> + /* port 1 */
> + regmap_reg_range(0x1000, 0x1001),
> + regmap_reg_range(0x1004, 0x100b),
> + regmap_reg_range(0x1013, 0x1013),
> + regmap_reg_range(0x1017, 0x1017),
> + regmap_reg_range(0x101b, 0x101b),
> + regmap_reg_range(0x101f, 0x1021),
> + regmap_reg_range(0x1030, 0x1030),
> + regmap_reg_range(0x1100, 0x1115),
> + regmap_reg_range(0x111a, 0x111f),
> + regmap_reg_range(0x1120, 0x112b),
> + regmap_reg_range(0x1134, 0x113b),
> + regmap_reg_range(0x113c, 0x113f),
> + regmap_reg_range(0x1400, 0x1401),
> + regmap_reg_range(0x1403, 0x1403),
> + regmap_reg_range(0x1410, 0x1417),
> + regmap_reg_range(0x1420, 0x1423),
> + regmap_reg_range(0x1500, 0x1507),
> + regmap_reg_range(0x1600, 0x1612),
> + regmap_reg_range(0x1800, 0x180f),
> + regmap_reg_range(0x1900, 0x1907),
> + regmap_reg_range(0x1914, 0x191b),
> + regmap_reg_range(0x1a00, 0x1a03),
> + regmap_reg_range(0x1a04, 0x1a07),
> + regmap_reg_range(0x1b00, 0x1b01),
> + regmap_reg_range(0x1b04, 0x1b04),
> + regmap_reg_range(0x1c00, 0x1c05),
> + regmap_reg_range(0x1c08, 0x1c1b),
> +
> + /* port 2 */
> + regmap_reg_range(0x2000, 0x2001),
> + regmap_reg_range(0x2004, 0x200b),
> + regmap_reg_range(0x2013, 0x2013),
> + regmap_reg_range(0x2017, 0x2017),
> + regmap_reg_range(0x201b, 0x201b),
> + regmap_reg_range(0x201f, 0x2021),
> + regmap_reg_range(0x2030, 0x2030),
> + regmap_reg_range(0x2100, 0x2115),
> + regmap_reg_range(0x211a, 0x211f),
> + regmap_reg_range(0x2120, 0x212b),
> + regmap_reg_range(0x2134, 0x213b),
> + regmap_reg_range(0x213c, 0x213f),
> + regmap_reg_range(0x2400, 0x2401),
> + regmap_reg_range(0x2403, 0x2403),
> + regmap_reg_range(0x2410, 0x2417),
> + regmap_reg_range(0x2420, 0x2423),
> + regmap_reg_range(0x2500, 0x2507),
> + regmap_reg_range(0x2600, 0x2612),
> + regmap_reg_range(0x2800, 0x280f),
> + regmap_reg_range(0x2900, 0x2907),
> + regmap_reg_range(0x2914, 0x291b),
> + regmap_reg_range(0x2a00, 0x2a03),
> + regmap_reg_range(0x2a04, 0x2a07),
> + regmap_reg_range(0x2b00, 0x2b01),
> + regmap_reg_range(0x2b04, 0x2b04),
> + regmap_reg_range(0x2c00, 0x2c05),
> + regmap_reg_range(0x2c08, 0x2c1b),
> +
> + /* port 3 */
> + regmap_reg_range(0x3000, 0x3001),
> + regmap_reg_range(0x3013, 0x3013),
> + regmap_reg_range(0x3017, 0x3017),
> + regmap_reg_range(0x301b, 0x301b),
> + regmap_reg_range(0x301f, 0x3020),
> + regmap_reg_range(0x3030, 0x3030),
> + regmap_reg_range(0x3300, 0x3301),
> + regmap_reg_range(0x3303, 0x3303),
> + regmap_reg_range(0x3400, 0x3401),
> + regmap_reg_range(0x3403, 0x3403),
> + regmap_reg_range(0x3410, 0x3417),
> + regmap_reg_range(0x3420, 0x3423),
> + regmap_reg_range(0x3500, 0x3507),
> + regmap_reg_range(0x3600, 0x3612),
> + regmap_reg_range(0x3800, 0x380f),
> + regmap_reg_range(0x3900, 0x3907),
> + regmap_reg_range(0x3914, 0x391b),
> + regmap_reg_range(0x3a00, 0x3a03),
> + regmap_reg_range(0x3a04, 0x3a07),
> + regmap_reg_range(0x3b00, 0x3b01),
> + regmap_reg_range(0x3b04, 0x3b04),
> + regmap_reg_range(0x3c00, 0x3c05),
> + regmap_reg_range(0x3c08, 0x3c1b),
> +};
> +
> +static const struct regmap_access_table ksz9563_register_set = {
> + .yes_ranges = ksz9563_valid_regs,
> + .n_yes_ranges = ARRAY_SIZE(ksz9563_valid_regs),
> +};
> +
> static const struct regmap_range ksz9477_valid_regs[] = {
> regmap_reg_range(0x0000, 0x0003),
> regmap_reg_range(0x0006, 0x0006),
> @@ -1475,6 +1594,8 @@ const struct ksz_chip_data ksz_switch_chips[] = {
> .supports_rgmii = {false, false, true},
> .internal_phy = {true, true, false},
> .gbit_capable = {true, true, true},
> + .wr_table = &ksz9563_register_set,
> + .rd_table = &ksz9563_register_set,
> },
>
> [KSZ8567] = {
> --
> 2.39.2
>
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2024-06-27 12:43 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-27 12:39 [PATCH net-next v1 1/1] net: dsa: microchip: add regmap_range for KSZ9563 chip Oleksij Rempel
2024-06-27 12:39 ` [PATCH net-next v1 1/3] net: dsa: microchip: lan9372: add 100BaseTX PHY support Oleksij Rempel
2024-06-28 2:31 ` Arun.Ramadoss
2024-06-27 12:39 ` [PATCH net-next v1 2/3] net: dsa: microchip: lan937x: force RGMII interface into PHY mode Oleksij Rempel
2024-06-27 15:15 ` Andrew Lunn
2024-06-27 22:25 ` Vladimir Oltean
2024-06-28 7:10 ` Oleksij Rempel
2024-06-28 14:02 ` Andrew Lunn
2024-06-27 12:39 ` [PATCH net-next v1 3/3] net: dsa: microchip: lan937x: disable VPHY output Oleksij Rempel
2024-06-27 22:38 ` Vladimir Oltean
2024-06-28 5:27 ` Oleksij Rempel
2024-06-28 8:45 ` Lucas Stach
2024-06-27 12:43 ` Oleksij Rempel [this message]
2024-06-27 22:00 ` [PATCH net-next v1 1/1] net: dsa: microchip: add regmap_range for KSZ9563 chip Jakub Kicinski
-- strict thread matches above, loose matches on Subject: below --
2024-03-08 10:50 Oleksij Rempel
2024-03-11 9:21 ` Simon Horman
2024-03-11 16:36 ` Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Zn1eeYwYgU2ocWHz@pengutronix.de \
--to=o.rempel@pengutronix.de \
--cc=UNGLinuxDriver@microchip.com \
--cc=andrew@lunn.ch \
--cc=arun.ramadoss@microchip.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=kernel@pengutronix.de \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=woojung.huh@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).