Re: [PATCH] Fix misspelling of "accept*"

["Dr. David Alan Gilbert" <linux@treblig.org>]

* Alexander Zubkov (green@qrator.net) wrote:
> Several files have "accept*" misspelled as "accpet*" in the comments.
> Fix all such occurrences.
> 
> Signed-off-by: Alexander Zubkov <green@qrator.net>

Reviewed-by: Dr. David Alan Gilbert <linux@treblig.org>

hmm, should probably cc in some maintainers, I guess networking.
(added netdev and Paolo)

Dave

> ---
>  drivers/infiniband/hw/irdma/cm.c                              | 2 +-
>  drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_main.c | 4 ++--
>  drivers/net/ethernet/natsemi/ns83820.c                        | 2 +-
>  include/uapi/linux/udp.h                                      | 2 +-
>  4 files changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/infiniband/hw/irdma/cm.c b/drivers/infiniband/hw/irdma/cm.c
> index 36bb7e5ce..ce8d821bd 100644
> --- a/drivers/infiniband/hw/irdma/cm.c
> +++ b/drivers/infiniband/hw/irdma/cm.c
> @@ -3631,7 +3631,7 @@ void irdma_free_lsmm_rsrc(struct irdma_qp *iwqp)
>  /**
>   * irdma_accept - registered call for connection to be accepted
>   * @cm_id: cm information for passive connection
> - * @conn_param: accpet parameters
> + * @conn_param: accept parameters
>   */
>  int irdma_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
>  {
> diff --git a/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_main.c b/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_main.c
> index 455a54708..96fd31d75 100644
> --- a/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_main.c
> +++ b/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_main.c
> @@ -342,8 +342,8 @@ static struct sk_buff *copy_gl_to_skb_pkt(const struct pkt_gl *gl,
>  {
>  	struct sk_buff *skb;
>  
> -	/* Allocate space for cpl_pass_accpet_req which will be synthesized by
> -	 * driver. Once driver synthesizes cpl_pass_accpet_req the skb will go
> +	/* Allocate space for cpl_pass_accept_req which will be synthesized by
> +	 * driver. Once driver synthesizes cpl_pass_accept_req the skb will go
>  	 * through the regular cpl_pass_accept_req processing in TOM.
>  	 */
>  	skb = alloc_skb(gl->tot_len + sizeof(struct cpl_pass_accept_req)
> diff --git a/drivers/net/ethernet/natsemi/ns83820.c b/drivers/net/ethernet/natsemi/ns83820.c
> index 998586872..bea969dfa 100644
> --- a/drivers/net/ethernet/natsemi/ns83820.c
> +++ b/drivers/net/ethernet/natsemi/ns83820.c
> @@ -2090,7 +2090,7 @@ static int ns83820_init_one(struct pci_dev *pci_dev,
>  	 */
>  	/* Ramit : 1024 DMA is not a good idea, it ends up banging
>  	 * some DELL and COMPAQ SMP systems
> -	 * Turn on ALP, only we are accpeting Jumbo Packets */
> +	 * Turn on ALP, only we are accepting Jumbo Packets */
>  	writel(RXCFG_AEP | RXCFG_ARP | RXCFG_AIRL | RXCFG_RX_FD
>  		| RXCFG_STRIPCRC
>  		//| RXCFG_ALP
> diff --git a/include/uapi/linux/udp.h b/include/uapi/linux/udp.h
> index 1a0fe8b15..d85d671de 100644
> --- a/include/uapi/linux/udp.h
> +++ b/include/uapi/linux/udp.h
> @@ -31,7 +31,7 @@ struct udphdr {
>  #define UDP_CORK	1	/* Never send partially complete segments */
>  #define UDP_ENCAP	100	/* Set the socket to accept encapsulated packets */
>  #define UDP_NO_CHECK6_TX 101	/* Disable sending checksum for UDP6X */
> -#define UDP_NO_CHECK6_RX 102	/* Disable accpeting checksum for UDP6 */
> +#define UDP_NO_CHECK6_RX 102	/* Disable accepting checksum for UDP6 */
>  #define UDP_SEGMENT	103	/* Set GSO segmentation size */
>  #define UDP_GRO		104	/* This socket can receive UDP GRO packets */
>  
> -- 
> 2.45.2
> 
> 
-- 
 -----Open up your eyes, open up your mind, open up your code -------   
/ Dr. David Alan Gilbert    |       Running GNU/Linux       | Happy  \ 
\        dave @ treblig.org |                               | In Hex /
 \ _________________________|_____ http://www.treblig.org   |_______/