[PATH v6 0/3] vdpa: support set mac address from vdpa tool

[PATH v6 0/3] vdpa: support set mac address from vdpa tool

[Cindy Lu]

Add support for setting the MAC address using the VDPA tool.
This feature will allow setting the MAC address using the VDPA tool.
For example, in vdpa_sim_net, the implementation sets the MAC address
to the config space. However, for other drivers, they can implement their
own function, not limited to the config space.

Changelog v2
 - Changed the function name to prevent misunderstanding
 - Added check for blk device
 - Addressed the comments
Changelog v3
 - Split the function of the net device from vdpa_nl_cmd_dev_attr_set_doit
 - Add a lock for the network device's dev_set_attr operation
 - Address the comments
Changelog v4
 - Address the comments
 - Add a lock for the vdap_sim?_net device's dev_set_attr operation
Changelog v5
 - Address the comments
Changelog v6 
- Replace all the memcpy of mac address with ether_addr_copy()
- Remove the check for VIRTIO_NET_F_MAC in vdpa_dev_net_device_attr_set
- Remove unnecessary check
- Enhance the error log

Cindy Lu (3):
  vdpa: support set mac address from vdpa tool
  vdpa_sim_net: Add the support of set mac address
  vdpa/mlx5: Add the support of set mac address

 drivers/vdpa/mlx5/net/mlx5_vnet.c    | 28 ++++++++++
 drivers/vdpa/vdpa.c                  | 80 ++++++++++++++++++++++++++++
 drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 22 +++++++-
 include/linux/vdpa.h                 |  9 ++++
 include/uapi/linux/vdpa.h            |  1 +
 5 files changed, 139 insertions(+), 1 deletion(-)

-- 
2.45.0

[PATH v6 1/3] vdpa: support set mac address from vdpa tool

[Cindy Lu]

Add new UAPI to support the mac address from vdpa tool
Function vdpa_nl_cmd_dev_attr_set_doit() will get the
new MAC address from the vdpa tool and then set it to the device.

The usage is: vdpa dev set name vdpa_name mac **:**:**:**:**:**

Here is example:
root@L1# vdpa -jp dev config show vdpa0
{
    "config": {
        "vdpa0": {
            "mac": "82:4d:e9:5d:d7:e6",
            "link ": "up",
            "link_announce ": false,
            "mtu": 1500
        }
    }
}

root@L1# vdpa dev set name vdpa0 mac 00:11:22:33:44:55

root@L1# vdpa -jp dev config show vdpa0
{
    "config": {
        "vdpa0": {
            "mac": "00:11:22:33:44:55",
            "link ": "up",
            "link_announce ": false,
            "mtu": 1500
        }
    }
}

Signed-off-by: Cindy Lu <lulu@redhat.com>
---
 drivers/vdpa/vdpa.c       | 80 +++++++++++++++++++++++++++++++++++++++
 include/linux/vdpa.h      |  9 +++++
 include/uapi/linux/vdpa.h |  1 +
 3 files changed, 90 insertions(+)

diff --git a/drivers/vdpa/vdpa.c b/drivers/vdpa/vdpa.c
index 8d391947eb8d..532cf3b52b26 100644
--- a/drivers/vdpa/vdpa.c
+++ b/drivers/vdpa/vdpa.c
@@ -1361,6 +1361,81 @@ static int vdpa_nl_cmd_dev_config_get_doit(struct sk_buff *skb, struct genl_info
 	return err;
 }
 
+static int vdpa_dev_net_device_attr_set(struct vdpa_device *vdev,
+					struct genl_info *info)
+{
+	struct vdpa_dev_set_config set_config = {};
+	const u8 *macaddr;
+	struct vdpa_mgmt_dev *mdev = vdev->mdev;
+	struct nlattr **nl_attrs = info->attrs;
+	int err = -EINVAL;
+
+	down_write(&vdev->cf_lock);
+	if (nl_attrs[VDPA_ATTR_DEV_NET_CFG_MACADDR]) {
+		set_config.mask |= BIT_ULL(VDPA_ATTR_DEV_NET_CFG_MACADDR);
+		macaddr = nla_data(nl_attrs[VDPA_ATTR_DEV_NET_CFG_MACADDR]);
+
+		if (is_valid_ether_addr(macaddr)) {
+			ether_addr_copy(set_config.net.mac, macaddr);
+			memcpy(set_config.net.mac, macaddr, ETH_ALEN);
+			if (mdev->ops->dev_set_attr) {
+				err = mdev->ops->dev_set_attr(mdev, vdev,
+							      &set_config);
+			} else {
+				NL_SET_ERR_MSG_FMT_MOD(
+					info->extack,
+					"device does not support changing the MAC address");
+			}
+		} else {
+			NL_SET_ERR_MSG_FMT_MOD(info->extack,
+					       "Invalid MAC address");
+		}
+	}
+	up_write(&vdev->cf_lock);
+	return err;
+}
+static int vdpa_nl_cmd_dev_attr_set_doit(struct sk_buff *skb,
+					 struct genl_info *info)
+{
+	const char *name;
+	int err = 0;
+	struct device *dev;
+	struct vdpa_device *vdev;
+	u64 classes;
+
+	if (!info->attrs[VDPA_ATTR_DEV_NAME])
+		return -EINVAL;
+
+	name = nla_data(info->attrs[VDPA_ATTR_DEV_NAME]);
+
+	down_write(&vdpa_dev_lock);
+	dev = bus_find_device(&vdpa_bus, NULL, name, vdpa_name_match);
+	if (!dev) {
+		NL_SET_ERR_MSG_MOD(info->extack, "device not found");
+		err = -ENODEV;
+		goto dev_err;
+	}
+	vdev = container_of(dev, struct vdpa_device, dev);
+	if (!vdev->mdev) {
+		NL_SET_ERR_MSG_MOD(info->extack, "unmanaged vdpa device");
+		err = -EINVAL;
+		goto mdev_err;
+	}
+	classes = vdpa_mgmtdev_get_classes(vdev->mdev, NULL);
+	if (classes & BIT_ULL(VIRTIO_ID_NET)) {
+		err = vdpa_dev_net_device_attr_set(vdev, info);
+	} else {
+		NL_SET_ERR_MSG_FMT_MOD(info->extack, "%s device not supported",
+				       name);
+	}
+
+mdev_err:
+	put_device(dev);
+dev_err:
+	up_write(&vdpa_dev_lock);
+	return err;
+}
+
 static int vdpa_dev_config_dump(struct device *dev, void *data)
 {
 	struct vdpa_device *vdev = container_of(dev, struct vdpa_device, dev);
@@ -1497,6 +1572,11 @@ static const struct genl_ops vdpa_nl_ops[] = {
 		.doit = vdpa_nl_cmd_dev_stats_get_doit,
 		.flags = GENL_ADMIN_PERM,
 	},
+	{
+		.cmd = VDPA_CMD_DEV_ATTR_SET,
+		.doit = vdpa_nl_cmd_dev_attr_set_doit,
+		.flags = GENL_ADMIN_PERM,
+	},
 };
 
 static struct genl_family vdpa_nl_family __ro_after_init = {
diff --git a/include/linux/vdpa.h b/include/linux/vdpa.h
index 7977ca03ac7a..2e7a30fe6b92 100644
--- a/include/linux/vdpa.h
+++ b/include/linux/vdpa.h
@@ -582,11 +582,20 @@ void vdpa_set_status(struct vdpa_device *vdev, u8 status);
  *	     @dev: vdpa device to remove
  *	     Driver need to remove the specified device by calling
  *	     _vdpa_unregister_device().
+ * @dev_set_attr: change a vdpa device's attr after it was create
+ *	     @mdev: parent device to use for device
+ *	     @dev: vdpa device structure
+ *	     @config:Attributes to be set for the device.
+ *	     The driver needs to check the mask of the structure and then set
+ *	     the related information to the vdpa device. The driver must return 0
+ *	     if set successfully.
  */
 struct vdpa_mgmtdev_ops {
 	int (*dev_add)(struct vdpa_mgmt_dev *mdev, const char *name,
 		       const struct vdpa_dev_set_config *config);
 	void (*dev_del)(struct vdpa_mgmt_dev *mdev, struct vdpa_device *dev);
+	int (*dev_set_attr)(struct vdpa_mgmt_dev *mdev, struct vdpa_device *dev,
+			    const struct vdpa_dev_set_config *config);
 };
 
 /**
diff --git a/include/uapi/linux/vdpa.h b/include/uapi/linux/vdpa.h
index 842bf1201ac4..71edf2c70cc3 100644
--- a/include/uapi/linux/vdpa.h
+++ b/include/uapi/linux/vdpa.h
@@ -19,6 +19,7 @@ enum vdpa_command {
 	VDPA_CMD_DEV_GET,		/* can dump */
 	VDPA_CMD_DEV_CONFIG_GET,	/* can dump */
 	VDPA_CMD_DEV_VSTATS_GET,
+	VDPA_CMD_DEV_ATTR_SET,
 };
 
 enum vdpa_attr {
-- 
2.45.0

Re: [PATH v6 1/3] vdpa: support set mac address from vdpa tool

[Joe Damato]

On Thu, Jul 25, 2024 at 09:31:02AM +0800, Cindy Lu wrote:
[...]
> diff --git a/drivers/vdpa/vdpa.c b/drivers/vdpa/vdpa.c
> index 8d391947eb8d..532cf3b52b26 100644
> --- a/drivers/vdpa/vdpa.c
> +++ b/drivers/vdpa/vdpa.c
> @@ -1361,6 +1361,81 @@ static int vdpa_nl_cmd_dev_config_get_doit(struct sk_buff *skb, struct genl_info
>  	return err;
>  }
>  
> +static int vdpa_dev_net_device_attr_set(struct vdpa_device *vdev,
> +					struct genl_info *info)
> +{
> +	struct vdpa_dev_set_config set_config = {};
> +	const u8 *macaddr;
> +	struct vdpa_mgmt_dev *mdev = vdev->mdev;
> +	struct nlattr **nl_attrs = info->attrs;
> +	int err = -EINVAL;

Nit: IIRC networking code prefers reverse-xmas tree style and
macaddr above needs to be moved.

> +	down_write(&vdev->cf_lock);
> +	if (nl_attrs[VDPA_ATTR_DEV_NET_CFG_MACADDR]) {
> +		set_config.mask |= BIT_ULL(VDPA_ATTR_DEV_NET_CFG_MACADDR);
> +		macaddr = nla_data(nl_attrs[VDPA_ATTR_DEV_NET_CFG_MACADDR]);
> +
> +		if (is_valid_ether_addr(macaddr)) {
> +			ether_addr_copy(set_config.net.mac, macaddr);
> +			memcpy(set_config.net.mac, macaddr, ETH_ALEN);
> +			if (mdev->ops->dev_set_attr) {
> +				err = mdev->ops->dev_set_attr(mdev, vdev,
> +							      &set_config);
> +			} else {
> +				NL_SET_ERR_MSG_FMT_MOD(
> +					info->extack,
> +					"device does not support changing the MAC address");
> +			}
> +		} else {
> +			NL_SET_ERR_MSG_FMT_MOD(info->extack,
> +					       "Invalid MAC address");
> +		}
> +	}
> +	up_write(&vdev->cf_lock);
> +	return err;
> +}

Nit: other code in this file has line breaks separating functions.
Probably good to add one here?


> +static int vdpa_nl_cmd_dev_attr_set_doit(struct sk_buff *skb,
> +					 struct genl_info *info)

Nit: Does the above pass ./scripts/checkpatch.pl --strict ? I am asking
because it seems like the alignment might be off?

> +{
> +	const char *name;
> +	int err = 0;
> +	struct device *dev;
> +	struct vdpa_device *vdev;
> +	u64 classes;

Nit: Same as above; I believe networking code is supposed to follow
reverse xmas tree order so these variables should be rearranged.

> +	if (!info->attrs[VDPA_ATTR_DEV_NAME])
> +		return -EINVAL;
> +
> +	name = nla_data(info->attrs[VDPA_ATTR_DEV_NAME]);
> +
> +	down_write(&vdpa_dev_lock);
> +	dev = bus_find_device(&vdpa_bus, NULL, name, vdpa_name_match);
> +	if (!dev) {
> +		NL_SET_ERR_MSG_MOD(info->extack, "device not found");
> +		err = -ENODEV;
> +		goto dev_err;
> +	}
> +	vdev = container_of(dev, struct vdpa_device, dev);
> +	if (!vdev->mdev) {
> +		NL_SET_ERR_MSG_MOD(info->extack, "unmanaged vdpa device");
> +		err = -EINVAL;
> +		goto mdev_err;
> +	}
> +	classes = vdpa_mgmtdev_get_classes(vdev->mdev, NULL);
> +	if (classes & BIT_ULL(VIRTIO_ID_NET)) {
> +		err = vdpa_dev_net_device_attr_set(vdev, info);
> +	} else {
> +		NL_SET_ERR_MSG_FMT_MOD(info->extack, "%s device not supported",
> +				       name);
> +	}
> +
> +mdev_err:
> +	put_device(dev);
> +dev_err:
> +	up_write(&vdpa_dev_lock);
> +	return err;
> +}

[...]

Re: [PATH v6 1/3] vdpa: support set mac address from vdpa tool

[Cindy Lu]

On Fri, 26 Jul 2024 at 01:29, Joe Damato <jdamato@fastly.com> wrote:
>
> On Thu, Jul 25, 2024 at 09:31:02AM +0800, Cindy Lu wrote:
> [...]
> > diff --git a/drivers/vdpa/vdpa.c b/drivers/vdpa/vdpa.c
> > index 8d391947eb8d..532cf3b52b26 100644
> > --- a/drivers/vdpa/vdpa.c
> > +++ b/drivers/vdpa/vdpa.c
> > @@ -1361,6 +1361,81 @@ static int vdpa_nl_cmd_dev_config_get_doit(struct sk_buff *skb, struct genl_info
> >       return err;
> >  }
> >
> > +static int vdpa_dev_net_device_attr_set(struct vdpa_device *vdev,
> > +                                     struct genl_info *info)
> > +{
> > +     struct vdpa_dev_set_config set_config = {};
> > +     const u8 *macaddr;
> > +     struct vdpa_mgmt_dev *mdev = vdev->mdev;
> > +     struct nlattr **nl_attrs = info->attrs;
> > +     int err = -EINVAL;
>
> Nit: IIRC networking code prefers reverse-xmas tree style and
> macaddr above needs to be moved.
>
will fix  this
thanks
Cindy

Cindy
> > +     down_write(&vdev->cf_lock);
> > +     if (nl_attrs[VDPA_ATTR_DEV_NET_CFG_MACADDR]) {
> > +             set_config.mask |= BIT_ULL(VDPA_ATTR_DEV_NET_CFG_MACADDR);
> > +             macaddr = nla_data(nl_attrs[VDPA_ATTR_DEV_NET_CFG_MACADDR]);
> > +
> > +             if (is_valid_ether_addr(macaddr)) {
> > +                     ether_addr_copy(set_config.net.mac, macaddr);
> > +                     memcpy(set_config.net.mac, macaddr, ETH_ALEN);
> > +                     if (mdev->ops->dev_set_attr) {
> > +                             err = mdev->ops->dev_set_attr(mdev, vdev,
> > +                                                           &set_config);
> > +                     } else {
> > +                             NL_SET_ERR_MSG_FMT_MOD(
> > +                                     info->extack,
> > +                                     "device does not support changing the MAC address");
> > +                     }
> > +             } else {
> > +                     NL_SET_ERR_MSG_FMT_MOD(info->extack,
> > +                                            "Invalid MAC address");
> > +             }
> > +     }
> > +     up_write(&vdev->cf_lock);
> > +     return err;
> > +}
>
> Nit: other code in this file has line breaks separating functions.
> Probably good to add one here?
>
>
> > +static int vdpa_nl_cmd_dev_attr_set_doit(struct sk_buff *skb,
> > +                                      struct genl_info *info)
>
> Nit: Does the above pass ./scripts/checkpatch.pl --strict ? I am asking
> because it seems like the alignment might be off?
>
> > +{
> > +     const char *name;
> > +     int err = 0;
> > +     struct device *dev;
> > +     struct vdpa_device *vdev;
> > +     u64 classes;
>
> Nit: Same as above; I believe networking code is supposed to follow
> reverse xmas tree order so these variables should be rearranged.
>
> > +     if (!info->attrs[VDPA_ATTR_DEV_NAME])
> > +             return -EINVAL;
> > +
> > +     name = nla_data(info->attrs[VDPA_ATTR_DEV_NAME]);
> > +
> > +     down_write(&vdpa_dev_lock);
> > +     dev = bus_find_device(&vdpa_bus, NULL, name, vdpa_name_match);
> > +     if (!dev) {
> > +             NL_SET_ERR_MSG_MOD(info->extack, "device not found");
> > +             err = -ENODEV;
> > +             goto dev_err;
> > +     }
> > +     vdev = container_of(dev, struct vdpa_device, dev);
> > +     if (!vdev->mdev) {
> > +             NL_SET_ERR_MSG_MOD(info->extack, "unmanaged vdpa device");
> > +             err = -EINVAL;
> > +             goto mdev_err;
> > +     }
> > +     classes = vdpa_mgmtdev_get_classes(vdev->mdev, NULL);
> > +     if (classes & BIT_ULL(VIRTIO_ID_NET)) {
> > +             err = vdpa_dev_net_device_attr_set(vdev, info);
> > +     } else {
> > +             NL_SET_ERR_MSG_FMT_MOD(info->extack, "%s device not supported",
> > +                                    name);
> > +     }
> > +
> > +mdev_err:
> > +     put_device(dev);
> > +dev_err:
> > +     up_write(&vdpa_dev_lock);
> > +     return err;
> > +}
>
> [...]
>

Re: [PATH v6 1/3] vdpa: support set mac address from vdpa tool

[Cindy Lu]

On Fri, 26 Jul 2024 at 01:29, Joe Damato <jdamato@fastly.com> wrote:
>
> On Thu, Jul 25, 2024 at 09:31:02AM +0800, Cindy Lu wrote:
> [...]
> > diff --git a/drivers/vdpa/vdpa.c b/drivers/vdpa/vdpa.c
> > index 8d391947eb8d..532cf3b52b26 100644
> > --- a/drivers/vdpa/vdpa.c
> > +++ b/drivers/vdpa/vdpa.c
> > @@ -1361,6 +1361,81 @@ static int vdpa_nl_cmd_dev_config_get_doit(struct sk_buff *skb, struct genl_info
> >       return err;
> >  }
> >
> > +static int vdpa_dev_net_device_attr_set(struct vdpa_device *vdev,
> > +                                     struct genl_info *info)
> > +{
> > +     struct vdpa_dev_set_config set_config = {};
> > +     const u8 *macaddr;
> > +     struct vdpa_mgmt_dev *mdev = vdev->mdev;
> > +     struct nlattr **nl_attrs = info->attrs;
> > +     int err = -EINVAL;
>
> Nit: IIRC networking code prefers reverse-xmas tree style and
> macaddr above needs to be moved.
>
will fix  this
thanks
cindy
> > +     down_write(&vdev->cf_lock);
> > +     if (nl_attrs[VDPA_ATTR_DEV_NET_CFG_MACADDR]) {
> > +             set_config.mask |= BIT_ULL(VDPA_ATTR_DEV_NET_CFG_MACADDR);
> > +             macaddr = nla_data(nl_attrs[VDPA_ATTR_DEV_NET_CFG_MACADDR]);
> > +
> > +             if (is_valid_ether_addr(macaddr)) {
> > +                     ether_addr_copy(set_config.net.mac, macaddr);
> > +                     memcpy(set_config.net.mac, macaddr, ETH_ALEN);
> > +                     if (mdev->ops->dev_set_attr) {
> > +                             err = mdev->ops->dev_set_attr(mdev, vdev,
> > +                                                           &set_config);
> > +                     } else {
> > +                             NL_SET_ERR_MSG_FMT_MOD(
> > +                                     info->extack,
> > +                                     "device does not support changing the MAC address");
> > +                     }
> > +             } else {
> > +                     NL_SET_ERR_MSG_FMT_MOD(info->extack,
> > +                                            "Invalid MAC address");
> > +             }
> > +     }
> > +     up_write(&vdev->cf_lock);
> > +     return err;
> > +}
>
> Nit: other code in this file has line breaks separating functions.
> Probably good to add one here?
>
sure will change this
thanks
Cindy
>
> > +static int vdpa_nl_cmd_dev_attr_set_doit(struct sk_buff *skb,
> > +                                      struct genl_info *info)
>
> Nit: Does the above pass ./scripts/checkpatch.pl --strict ? I am asking
> because it seems like the alignment might be off?
>
I tried this, but there doesn't seem to have warning. I'll double-check this.
Thanks
cindy
> > +{
> > +     const char *name;
> > +     int err = 0;
> > +     struct device *dev;
> > +     struct vdpa_device *vdev;
> > +     u64 classes;
>
> Nit: Same as above; I believe networking code is supposed to follow
> reverse xmas tree order so these variables should be rearranged.
>
will fix  this

> > +     if (!info->attrs[VDPA_ATTR_DEV_NAME])
> > +             return -EINVAL;
> > +
> > +     name = nla_data(info->attrs[VDPA_ATTR_DEV_NAME]);
> > +
> > +     down_write(&vdpa_dev_lock);
> > +     dev = bus_find_device(&vdpa_bus, NULL, name, vdpa_name_match);
> > +     if (!dev) {
> > +             NL_SET_ERR_MSG_MOD(info->extack, "device not found");
> > +             err = -ENODEV;
> > +             goto dev_err;
> > +     }
> > +     vdev = container_of(dev, struct vdpa_device, dev);
> > +     if (!vdev->mdev) {
> > +             NL_SET_ERR_MSG_MOD(info->extack, "unmanaged vdpa device");
> > +             err = -EINVAL;
> > +             goto mdev_err;
> > +     }
> > +     classes = vdpa_mgmtdev_get_classes(vdev->mdev, NULL);
> > +     if (classes & BIT_ULL(VIRTIO_ID_NET)) {
> > +             err = vdpa_dev_net_device_attr_set(vdev, info);
> > +     } else {
> > +             NL_SET_ERR_MSG_FMT_MOD(info->extack, "%s device not supported",
> > +                                    name);
> > +     }
> > +
> > +mdev_err:
> > +     put_device(dev);
> > +dev_err:
> > +     up_write(&vdpa_dev_lock);
> > +     return err;
> > +}
>
> [...]
>

[PATH v6 2/3] vdpa_sim_net: Add the support of set mac address

[Cindy Lu]

Add the function to support setting the MAC address.
For vdpa_sim_net, the driver will write the MAC address
to the config space, and other devices can implement
their own functions to support this.

Signed-off-by: Cindy Lu <lulu@redhat.com>
---
 drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
index cfe962911804..cd404a896414 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
@@ -414,6 +414,25 @@ static void vdpasim_net_get_config(struct vdpasim *vdpasim, void *config)
 	net_config->status = cpu_to_vdpasim16(vdpasim, VIRTIO_NET_S_LINK_UP);
 }
 
+static int vdpasim_net_set_attr(struct vdpa_mgmt_dev *mdev,
+				struct vdpa_device *dev,
+				const struct vdpa_dev_set_config *config)
+{
+	struct vdpasim *vdpasim = container_of(dev, struct vdpasim, vdpa);
+	struct virtio_net_config *vio_config = vdpasim->config;
+
+	mutex_lock(&vdpasim->mutex);
+
+	if (config->mask & (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR)) {
+		ether_addr_copy(vio_config->mac, config->net.mac);
+		mutex_unlock(&vdpasim->mutex);
+		return 0;
+	}
+
+	mutex_unlock(&vdpasim->mutex);
+	return -EINVAL;
+}
+
 static void vdpasim_net_setup_config(struct vdpasim *vdpasim,
 				     const struct vdpa_dev_set_config *config)
 {
@@ -510,7 +529,8 @@ static void vdpasim_net_dev_del(struct vdpa_mgmt_dev *mdev,
 
 static const struct vdpa_mgmtdev_ops vdpasim_net_mgmtdev_ops = {
 	.dev_add = vdpasim_net_dev_add,
-	.dev_del = vdpasim_net_dev_del
+	.dev_del = vdpasim_net_dev_del,
+	.dev_set_attr = vdpasim_net_set_attr
 };
 
 static struct virtio_device_id id_table[] = {
-- 
2.45.0

[PATH v6 3/3] vdpa/mlx5: Add the support of set mac address

[Cindy Lu]

Add the function to support setting the MAC address.
For vdpa/mlx5, the function will use mlx5_mpfs_add_mac
to set the mac address

Tested in ConnectX-6 Dx device

Signed-off-by: Cindy Lu <lulu@redhat.com>
---
 drivers/vdpa/mlx5/net/mlx5_vnet.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c
index ecfc16151d61..d7e5e30e9ef4 100644
--- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
+++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
@@ -3785,10 +3785,38 @@ static void mlx5_vdpa_dev_del(struct vdpa_mgmt_dev *v_mdev, struct vdpa_device *
 	destroy_workqueue(wq);
 	mgtdev->ndev = NULL;
 }
+static int mlx5_vdpa_set_attr(struct vdpa_mgmt_dev *v_mdev,
+			      struct vdpa_device *dev,
+			      const struct vdpa_dev_set_config *add_config)
+{
+	struct virtio_net_config *config;
+	struct mlx5_core_dev *pfmdev;
+	struct mlx5_vdpa_dev *mvdev;
+	struct mlx5_vdpa_net *ndev;
+	struct mlx5_core_dev *mdev;
+	int err = -EINVAL;
+
+	mvdev = to_mvdev(dev);
+	ndev = to_mlx5_vdpa_ndev(mvdev);
+	mdev = mvdev->mdev;
+	config = &ndev->config;
+
+	down_write(&ndev->reslock);
+	if (add_config->mask & (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR)) {
+		pfmdev = pci_get_drvdata(pci_physfn(mdev->pdev));
+		err = mlx5_mpfs_add_mac(pfmdev, config->mac);
+		if (!err)
+			ether_addr_copy(config->mac, add_config->net.mac);
+	}
+
+	up_write(&ndev->reslock);
+	return err;
+}
 
 static const struct vdpa_mgmtdev_ops mdev_ops = {
 	.dev_add = mlx5_vdpa_dev_add,
 	.dev_del = mlx5_vdpa_dev_del,
+	.dev_set_attr = mlx5_vdpa_set_attr,
 };
 
 static struct virtio_device_id id_table[] = {
-- 
2.45.0

Re: [PATH v6 3/3] vdpa/mlx5: Add the support of set mac address

[Joe Damato]

On Thu, Jul 25, 2024 at 09:31:04AM +0800, Cindy Lu wrote:
> Add the function to support setting the MAC address.
> For vdpa/mlx5, the function will use mlx5_mpfs_add_mac
> to set the mac address
> 
> Tested in ConnectX-6 Dx device
> 
> Signed-off-by: Cindy Lu <lulu@redhat.com>
> ---
>  drivers/vdpa/mlx5/net/mlx5_vnet.c | 28 ++++++++++++++++++++++++++++
>  1 file changed, 28 insertions(+)
> 
> diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c
> index ecfc16151d61..d7e5e30e9ef4 100644
> --- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
> +++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
> @@ -3785,10 +3785,38 @@ static void mlx5_vdpa_dev_del(struct vdpa_mgmt_dev *v_mdev, struct vdpa_device *
>  	destroy_workqueue(wq);
>  	mgtdev->ndev = NULL;
>  }

Nit: Other code in this file separates functions with newlines,
perhaps one is needed here?

> +static int mlx5_vdpa_set_attr(struct vdpa_mgmt_dev *v_mdev,
> +			      struct vdpa_device *dev,
> +			      const struct vdpa_dev_set_config *add_config)

Nit: it appears that the alignment is off on these parameters. Did
checkpatch.pl --strict pass on this?

> +{
> +	struct virtio_net_config *config;
> +	struct mlx5_core_dev *pfmdev;
> +	struct mlx5_vdpa_dev *mvdev;
> +	struct mlx5_vdpa_net *ndev;

[...]

Re: [PATH v6 3/3] vdpa/mlx5: Add the support of set mac address

[Cindy Lu]

On Fri, 26 Jul 2024 at 01:32, Joe Damato <jdamato@fastly.com> wrote:
>
> On Thu, Jul 25, 2024 at 09:31:04AM +0800, Cindy Lu wrote:
> > Add the function to support setting the MAC address.
> > For vdpa/mlx5, the function will use mlx5_mpfs_add_mac
> > to set the mac address
> >
> > Tested in ConnectX-6 Dx device
> >
> > Signed-off-by: Cindy Lu <lulu@redhat.com>
> > ---
> >  drivers/vdpa/mlx5/net/mlx5_vnet.c | 28 ++++++++++++++++++++++++++++
> >  1 file changed, 28 insertions(+)
> >
> > diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c
> > index ecfc16151d61..d7e5e30e9ef4 100644
> > --- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
> > +++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
> > @@ -3785,10 +3785,38 @@ static void mlx5_vdpa_dev_del(struct vdpa_mgmt_dev *v_mdev, struct vdpa_device *
> >       destroy_workqueue(wq);
> >       mgtdev->ndev = NULL;
> >  }
>
> Nit: Other code in this file separates functions with newlines,
> perhaps one is needed here?
>
> > +static int mlx5_vdpa_set_attr(struct vdpa_mgmt_dev *v_mdev,
> > +                           struct vdpa_device *dev,
> > +                           const struct vdpa_dev_set_config *add_config)
>
> Nit: it appears that the alignment is off on these parameters. Did
> checkpatch.pl --strict pass on this?
>
sure, will check  this
thanks
> > +{
> > +     struct virtio_net_config *config;
> > +     struct mlx5_core_dev *pfmdev;
> > +     struct mlx5_vdpa_dev *mvdev;
> > +     struct mlx5_vdpa_net *ndev;
>
> [...]
>

Re: [PATH v6 0/3] vdpa: support set mac address from vdpa tool

[Joe Damato]

On Thu, Jul 25, 2024 at 09:31:01AM +0800, Cindy Lu wrote:
> Add support for setting the MAC address using the VDPA tool.
> This feature will allow setting the MAC address using the VDPA tool.
> For example, in vdpa_sim_net, the implementation sets the MAC address
> to the config space. However, for other drivers, they can implement their
> own function, not limited to the config space.

[...]

Nit: the subject line has misspelled PATCH as PATH

I believe net-next is still closed so this code needs to be resent
when net-next is open again in a few days.

Re: [PATH v6 0/3] vdpa: support set mac address from vdpa tool

[Cindy Lu]

On Fri, 26 Jul 2024 at 01:25, Joe Damato <jdamato@fastly.com> wrote:
>
> On Thu, Jul 25, 2024 at 09:31:01AM +0800, Cindy Lu wrote:
> > Add support for setting the MAC address using the VDPA tool.
> > This feature will allow setting the MAC address using the VDPA tool.
> > For example, in vdpa_sim_net, the implementation sets the MAC address
> > to the config space. However, for other drivers, they can implement their
> > own function, not limited to the config space.
>
> [...]
>
> Nit: the subject line has misspelled PATCH as PATH
>
> I believe net-next is still closed so this code needs to be resent
> when net-next is open again in a few days.
>
sure,will fix  this
thanks
cindy