From: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
To: Jiri Pirko <jiri@resnulli.us>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>,
davem@davemloft.net, kuba@kernel.org, pabeni@redhat.com,
edumazet@google.com, netdev@vger.kernel.org,
Piotr Raczynski <piotr.raczynski@intel.com>,
jiri@nvidia.com, shayd@nvidia.com, wojciech.drewek@intel.com,
horms@kernel.org, sridhar.samudrala@intel.com,
mateusz.polchlopek@intel.com,
kalesh-anakkur.purayil@broadcom.com, michal.kubiak@intel.com,
pio.raczynski@gmail.com, przemyslaw.kitszel@intel.com,
jacob.e.keller@intel.com, maciej.fijalkowski@intel.com,
Rafal Romanowski <rafal.romanowski@intel.com>
Subject: Re: [PATCH net-next v3 15/15] ice: allow to activate and deactivate subfunction
Date: Fri, 9 Aug 2024 13:49:54 +0200 [thread overview]
Message-ID: <ZrYCYvv37HGv7NnO@mev-dev.igk.intel.com> (raw)
In-Reply-To: <ZrX89AVg5o9lzSEA@nanopsycho.orion>
On Fri, Aug 09, 2024 at 01:26:44PM +0200, Jiri Pirko wrote:
> Thu, Aug 08, 2024 at 07:31:01PM CEST, anthony.l.nguyen@intel.com wrote:
> >From: Piotr Raczynski <piotr.raczynski@intel.com>
> >
> >Use previously implemented SF aux driver. It is probe during SF
> >activation and remove after deactivation.
> >
> >Reviewed-by: Simon Horman <horms@kernel.org>
> >Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
> >Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
> >Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
> >Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
> >---
> > .../ethernet/intel/ice/devlink/devlink_port.c | 176 ++++++++++++++++++
> > .../ethernet/intel/ice/devlink/devlink_port.h | 7 +
> > drivers/net/ethernet/intel/ice/ice_sf_eth.c | 103 ++++++++++
> > drivers/net/ethernet/intel/ice/ice_sf_eth.h | 3 +
> > 4 files changed, 289 insertions(+)
> >
> >diff --git a/drivers/net/ethernet/intel/ice/devlink/devlink_port.c b/drivers/net/ethernet/intel/ice/devlink/devlink_port.c
> >index 4cfd90581d92..675a2b60892b 100644
> >--- a/drivers/net/ethernet/intel/ice/devlink/devlink_port.c
> >+++ b/drivers/net/ethernet/intel/ice/devlink/devlink_port.c
> >@@ -530,6 +530,48 @@ void ice_devlink_destroy_sf_dev_port(struct ice_sf_dev *sf_dev)
> > devl_port_unregister(&sf_dev->priv->devlink_port);
> > }
> >
> >+/**
> >+ * ice_activate_dynamic_port - Activate a dynamic port
> >+ * @dyn_port: dynamic port instance to activate
> >+ * @extack: extack for reporting error messages
> >+ *
> >+ * Activate the dynamic port based on its flavour.
> >+ *
> >+ * Return: zero on success or an error code on failure.
> >+ */
> >+static int
> >+ice_activate_dynamic_port(struct ice_dynamic_port *dyn_port,
> >+ struct netlink_ext_ack *extack)
> >+{
> >+ int err;
> >+
> >+ if (dyn_port->active)
> >+ return 0;
> >+
> >+ err = ice_sf_eth_activate(dyn_port, extack);
> >+ if (err)
> >+ return err;
> >+
> >+ dyn_port->active = true;
> >+
> >+ return 0;
> >+}
> >+
> >+/**
> >+ * ice_deactivate_dynamic_port - Deactivate a dynamic port
> >+ * @dyn_port: dynamic port instance to deactivate
> >+ *
> >+ * Undo activation of a dynamic port.
> >+ */
> >+static void ice_deactivate_dynamic_port(struct ice_dynamic_port *dyn_port)
> >+{
> >+ if (!dyn_port->active)
> >+ return;
> >+
> >+ ice_sf_eth_deactivate(dyn_port);
> >+ dyn_port->active = false;
> >+}
> >+
> > /**
> > * ice_dealloc_dynamic_port - Deallocate and remove a dynamic port
> > * @dyn_port: dynamic port instance to deallocate
> >@@ -542,6 +584,8 @@ static void ice_dealloc_dynamic_port(struct ice_dynamic_port *dyn_port)
> > struct devlink_port *devlink_port = &dyn_port->devlink_port;
> > struct ice_pf *pf = dyn_port->pf;
> >
> >+ ice_deactivate_dynamic_port(dyn_port);
> >+
> > xa_erase(&pf->sf_nums, devlink_port->attrs.pci_sf.sf);
> > ice_eswitch_detach_sf(pf, dyn_port);
> > ice_vsi_free(dyn_port->vsi);
> >@@ -629,8 +673,140 @@ ice_devlink_port_del(struct devlink *devlink, struct devlink_port *port,
> > return 0;
> > }
> >
> >+/**
> >+ * ice_devlink_port_fn_hw_addr_set - devlink handler for mac address set
> >+ * @port: pointer to devlink port
> >+ * @hw_addr: hw address to set
> >+ * @hw_addr_len: hw address length
> >+ * @extack: extack for reporting error messages
> >+ *
> >+ * Sets mac address for the port, verifies arguments and copies address
> >+ * to the subfunction structure.
> >+ *
> >+ * Return: zero on success or an error code on failure.
> >+ */
> >+static int
> >+ice_devlink_port_fn_hw_addr_set(struct devlink_port *port, const u8 *hw_addr,
>
> Interesting. The patch subject and description talks about "activation"
> yet you also set/get hw address here. Either split to 2 patches of
> adjust the patch subject and desctiption.
>
I will adjust.
>
>
>
> >+ int hw_addr_len,
> >+ struct netlink_ext_ack *extack)
> >+{
> >+ struct ice_dynamic_port *dyn_port;
> >+
> >+ dyn_port = ice_devlink_port_to_dyn(port);
> >+
> >+ if (dyn_port->attached) {
> >+ NL_SET_ERR_MSG_MOD(extack,
> >+ "Ethernet address can be change only in detached state");
> >+ return -EBUSY;
> >+ }
> >+
> >+ if (hw_addr_len != ETH_ALEN || !is_valid_ether_addr(hw_addr)) {
> >+ NL_SET_ERR_MSG_MOD(extack, "Invalid ethernet address");
> >+ return -EADDRNOTAVAIL;
> >+ }
> >+
> >+ ether_addr_copy(dyn_port->hw_addr, hw_addr);
> >+
> >+ return 0;
> >+}
> >+
> >+/**
> >+ * ice_devlink_port_fn_hw_addr_get - devlink handler for mac address get
> >+ * @port: pointer to devlink port
> >+ * @hw_addr: hw address to set
> >+ * @hw_addr_len: hw address length
> >+ * @extack: extack for reporting error messages
> >+ *
> >+ * Returns mac address for the port.
> >+ *
> >+ * Return: zero on success or an error code on failure.
> >+ */
> >+static int
> >+ice_devlink_port_fn_hw_addr_get(struct devlink_port *port, u8 *hw_addr,
> >+ int *hw_addr_len,
> >+ struct netlink_ext_ack *extack)
> >+{
> >+ struct ice_dynamic_port *dyn_port;
> >+
> >+ dyn_port = ice_devlink_port_to_dyn(port);
> >+
> >+ ether_addr_copy(hw_addr, dyn_port->hw_addr);
> >+ *hw_addr_len = ETH_ALEN;
> >+
> >+ return 0;
> >+}
> >+
> >+/**
> >+ * ice_devlink_port_fn_state_set - devlink handler for port state set
> >+ * @port: pointer to devlink port
> >+ * @state: state to set
> >+ * @extack: extack for reporting error messages
> >+ *
> >+ * Activates or deactivates the port.
> >+ *
> >+ * Return: zero on success or an error code on failure.
> >+ */
> >+static int
> >+ice_devlink_port_fn_state_set(struct devlink_port *port,
> >+ enum devlink_port_fn_state state,
> >+ struct netlink_ext_ack *extack)
> >+{
> >+ struct ice_dynamic_port *dyn_port;
> >+
> >+ dyn_port = ice_devlink_port_to_dyn(port);
> >+
> >+ switch (state) {
> >+ case DEVLINK_PORT_FN_STATE_ACTIVE:
> >+ return ice_activate_dynamic_port(dyn_port, extack);
> >+
> >+ case DEVLINK_PORT_FN_STATE_INACTIVE:
> >+ ice_deactivate_dynamic_port(dyn_port);
> >+ break;
> >+ }
> >+
> >+ return 0;
> >+}
> >+
> >+/**
> >+ * ice_devlink_port_fn_state_get - devlink handler for port state get
> >+ * @port: pointer to devlink port
> >+ * @state: admin configured state of the port
> >+ * @opstate: current port operational state
> >+ * @extack: extack for reporting error messages
> >+ *
> >+ * Gets port state.
> >+ *
> >+ * Return: zero on success or an error code on failure.
> >+ */
> >+static int
> >+ice_devlink_port_fn_state_get(struct devlink_port *port,
> >+ enum devlink_port_fn_state *state,
> >+ enum devlink_port_fn_opstate *opstate,
> >+ struct netlink_ext_ack *extack)
> >+{
> >+ struct ice_dynamic_port *dyn_port;
> >+
> >+ dyn_port = ice_devlink_port_to_dyn(port);
> >+
> >+ if (dyn_port->active)
> >+ *state = DEVLINK_PORT_FN_STATE_ACTIVE;
> >+ else
> >+ *state = DEVLINK_PORT_FN_STATE_INACTIVE;
> >+
> >+ if (dyn_port->attached)
> >+ *opstate = DEVLINK_PORT_FN_OPSTATE_ATTACHED;
> >+ else
> >+ *opstate = DEVLINK_PORT_FN_OPSTATE_DETACHED;
> >+
> >+ return 0;
> >+}
> >+
> > static const struct devlink_port_ops ice_devlink_port_sf_ops = {
> > .port_del = ice_devlink_port_del,
> >+ .port_fn_hw_addr_get = ice_devlink_port_fn_hw_addr_get,
> >+ .port_fn_hw_addr_set = ice_devlink_port_fn_hw_addr_set,
> >+ .port_fn_state_get = ice_devlink_port_fn_state_get,
> >+ .port_fn_state_set = ice_devlink_port_fn_state_set,
> > };
> >
> > /**
> >diff --git a/drivers/net/ethernet/intel/ice/devlink/devlink_port.h b/drivers/net/ethernet/intel/ice/devlink/devlink_port.h
> >index 479d2b976745..d60efc340945 100644
> >--- a/drivers/net/ethernet/intel/ice/devlink/devlink_port.h
> >+++ b/drivers/net/ethernet/intel/ice/devlink/devlink_port.h
> >@@ -11,22 +11,29 @@
> > * struct ice_dynamic_port - Track dynamically added devlink port instance
> > * @hw_addr: the HW address for this port
> > * @active: true if the port has been activated
> >+ * @attached: true it the prot is attached
> > * @devlink_port: the associated devlink port structure
> > * @pf: pointer to the PF private structure
> > * @vsi: the VSI associated with this port
> > * @repr_id: the representor ID
> > * @sfnum: the subfunction ID
> >+ * @sf_dev: pointer to the subfunction device
> > *
> > * An instance of a dynamically added devlink port. Each port flavour
> > */
> > struct ice_dynamic_port {
> > u8 hw_addr[ETH_ALEN];
> > u8 active: 1;
> >+ u8 attached: 1;
> > struct devlink_port devlink_port;
> > struct ice_pf *pf;
> > struct ice_vsi *vsi;
> > unsigned long repr_id;
> > u32 sfnum;
> >+ /* Flavour-specific implementation data */
> >+ union {
> >+ struct ice_sf_dev *sf_dev;
> >+ };
> > };
> >
> > void ice_dealloc_all_dynamic_ports(struct ice_pf *pf);
> >diff --git a/drivers/net/ethernet/intel/ice/ice_sf_eth.c b/drivers/net/ethernet/intel/ice/ice_sf_eth.c
> >index 9eb8993df25a..27a5baee7880 100644
> >--- a/drivers/net/ethernet/intel/ice/ice_sf_eth.c
> >+++ b/drivers/net/ethernet/intel/ice/ice_sf_eth.c
> >@@ -150,6 +150,7 @@ static int ice_sf_dev_probe(struct auxiliary_device *adev,
> > devl_unlock(devlink);
> >
> > devlink_register(devlink);
> >+ dyn_port->attached = true;
> >
> > return 0;
> >
> >@@ -189,6 +190,8 @@ static void ice_sf_dev_remove(struct auxiliary_device *adev)
> > devl_unlock(devlink);
> > devlink_free(devlink);
> > ice_vsi_decfg(vsi);
> >+
> >+ dyn_port->attached = false;
> > }
> >
> > static const struct auxiliary_device_id ice_sf_dev_id_table[] = {
> >@@ -205,6 +208,8 @@ static struct auxiliary_driver ice_sf_driver = {
> > .id_table = ice_sf_dev_id_table
> > };
> >
> >+static DEFINE_XARRAY_ALLOC1(ice_sf_aux_id);
> >+
> > /**
> > * ice_sf_driver_register - Register new auxiliary subfunction driver
> > *
> >@@ -223,3 +228,101 @@ void ice_sf_driver_unregister(void)
> > {
> > auxiliary_driver_unregister(&ice_sf_driver);
> > }
> >+
> >+/**
> >+ * ice_sf_dev_release - Release device associated with auxiliary device
> >+ * @device: pointer to the device
> >+ *
> >+ * Since most of the code for subfunction deactivation is handled in
> >+ * the remove handler, here just free tracking resources.
> >+ */
> >+static void ice_sf_dev_release(struct device *device)
> >+{
> >+ struct auxiliary_device *adev = to_auxiliary_dev(device);
> >+ struct ice_sf_dev *sf_dev = ice_adev_to_sf_dev(adev);
> >+
> >+ xa_erase(&ice_sf_aux_id, adev->id);
> >+ kfree(sf_dev);
> >+}
> >+
> >+/**
> >+ * ice_sf_eth_activate - Activate Ethernet subfunction port
> >+ * @dyn_port: the dynamic port instance for this subfunction
> >+ * @extack: extack for reporting error messages
> >+ *
> >+ * Activate the dynamic port as an Ethernet subfunction. Setup the netdev
> >+ * resources associated and initialize the auxiliary device.
> >+ *
> >+ * Return: zero on success or an error code on failure.
> >+ */
> >+int
> >+ice_sf_eth_activate(struct ice_dynamic_port *dyn_port,
> >+ struct netlink_ext_ack *extack)
> >+{
> >+ struct ice_pf *pf = dyn_port->pf;
> >+ struct ice_sf_dev *sf_dev;
> >+ struct pci_dev *pdev;
> >+ int err;
> >+ u32 id;
> >+
> >+ err = xa_alloc(&ice_sf_aux_id, &id, NULL, xa_limit_32b,
> >+ GFP_KERNEL);
> >+ if (err) {
> >+ NL_SET_ERR_MSG_MOD(extack, "Could not allocate SF ID");
> >+ return err;
> >+ }
> >+
> >+ sf_dev = kzalloc(sizeof(*sf_dev), GFP_KERNEL);
> >+ if (!sf_dev) {
> >+ err = -ENOMEM;
> >+ NL_SET_ERR_MSG_MOD(extack, "Could not allocate SF memory");
> >+ goto xa_erase;
> >+ }
> >+ pdev = pf->pdev;
> >+
> >+ sf_dev->dyn_port = dyn_port;
> >+ sf_dev->adev.id = id;
> >+ sf_dev->adev.name = "sf";
> >+ sf_dev->adev.dev.release = ice_sf_dev_release;
> >+ sf_dev->adev.dev.parent = &pdev->dev;
> >+
> >+ err = auxiliary_device_init(&sf_dev->adev);
> >+ if (err) {
> >+ NL_SET_ERR_MSG_MOD(extack, "Failed to initialize SF device");
> >+ goto sf_dev_free;
> >+ }
> >+
> >+ err = auxiliary_device_add(&sf_dev->adev);
> >+ if (err) {
> >+ NL_SET_ERR_MSG_MOD(extack, "Failed to add SF device");
> >+ goto aux_dev_uninit;
> >+ }
> >+
> >+ dyn_port->sf_dev = sf_dev;
> >+
> >+ return 0;
> >+
> >+aux_dev_uninit:
> >+ auxiliary_device_uninit(&sf_dev->adev);
> >+sf_dev_free:
> >+ kfree(sf_dev);
> >+xa_erase:
> >+ xa_erase(&ice_sf_aux_id, id);
> >+
> >+ return err;
> >+}
> >+
> >+/**
> >+ * ice_sf_eth_deactivate - Deactivate Ethernet subfunction port
> >+ * @dyn_port: the dynamic port instance for this subfunction
> >+ *
> >+ * Deactivate the Ethernet subfunction, removing its auxiliary device and the
> >+ * associated resources.
> >+ */
> >+void ice_sf_eth_deactivate(struct ice_dynamic_port *dyn_port)
> >+{
> >+ struct ice_sf_dev *sf_dev = dyn_port->sf_dev;
> >+
> >+ auxiliary_device_delete(&sf_dev->adev);
> >+ auxiliary_device_uninit(&sf_dev->adev);
> >+}
> >diff --git a/drivers/net/ethernet/intel/ice/ice_sf_eth.h b/drivers/net/ethernet/intel/ice/ice_sf_eth.h
> >index e972c50f96c9..c558cad0a183 100644
> >--- a/drivers/net/ethernet/intel/ice/ice_sf_eth.h
> >+++ b/drivers/net/ethernet/intel/ice/ice_sf_eth.h
> >@@ -27,4 +27,7 @@ ice_sf_dev *ice_adev_to_sf_dev(struct auxiliary_device *adev)
> > int ice_sf_driver_register(void);
> > void ice_sf_driver_unregister(void);
> >
> >+int ice_sf_eth_activate(struct ice_dynamic_port *dyn_port,
> >+ struct netlink_ext_ack *extack);
> >+void ice_sf_eth_deactivate(struct ice_dynamic_port *dyn_port);
> > #endif /* _ICE_SF_ETH_H_ */
> >--
> >2.42.0
> >
> >
prev parent reply other threads:[~2024-08-09 11:51 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-08 17:30 [PATCH net-next v3 00/15][pull request] ice: support devlink subfunction Tony Nguyen
2024-08-08 17:30 ` [PATCH net-next v3 01/15] ice: add new VSI type for subfunctions Tony Nguyen
2024-08-08 17:30 ` [PATCH net-next v3 02/15] ice: export ice ndo_ops functions Tony Nguyen
2024-08-08 17:30 ` [PATCH net-next v3 03/15] ice: add basic devlink subfunctions support Tony Nguyen
2024-08-09 11:16 ` Jiri Pirko
2024-08-09 11:47 ` Michal Swiatkowski
2024-08-10 6:50 ` Jiri Pirko
2024-08-12 4:24 ` Michal Swiatkowski
2024-08-12 9:53 ` Jiri Pirko
2024-08-08 17:30 ` [PATCH net-next v3 04/15] ice: treat subfunction VSI the same as PF VSI Tony Nguyen
2024-08-08 17:30 ` [PATCH net-next v3 05/15] ice: allocate devlink for subfunction Tony Nguyen
2024-08-09 11:17 ` Jiri Pirko
2024-08-08 17:30 ` [PATCH net-next v3 06/15] ice: base subfunction aux driver Tony Nguyen
2024-08-09 11:23 ` Jiri Pirko
2024-08-09 11:49 ` Michal Swiatkowski
2024-08-08 17:30 ` [PATCH net-next v3 07/15] ice: implement netdev for subfunction Tony Nguyen
2024-08-08 17:30 ` [PATCH net-next v3 08/15] ice: make representor code generic Tony Nguyen
2024-08-08 17:30 ` [PATCH net-next v3 09/15] ice: create port representor for SF Tony Nguyen
2024-08-08 17:30 ` [PATCH net-next v3 10/15] ice: don't set target VSI for subfunction Tony Nguyen
2024-08-08 17:30 ` [PATCH net-next v3 11/15] ice: check if SF is ready in ethtool ops Tony Nguyen
2024-08-08 17:30 ` [PATCH net-next v3 12/15] ice: implement netdevice ops for SF representor Tony Nguyen
2024-08-08 17:30 ` [PATCH net-next v3 13/15] ice: support subfunction devlink Tx topology Tony Nguyen
2024-08-08 17:31 ` [PATCH net-next v3 14/15] ice: basic support for VLAN in subfunctions Tony Nguyen
2024-08-08 17:31 ` [PATCH net-next v3 15/15] ice: allow to activate and deactivate subfunction Tony Nguyen
2024-08-09 11:26 ` Jiri Pirko
2024-08-09 11:49 ` Michal Swiatkowski [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZrYCYvv37HGv7NnO@mev-dev.igk.intel.com \
--to=michal.swiatkowski@linux.intel.com \
--cc=anthony.l.nguyen@intel.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=jacob.e.keller@intel.com \
--cc=jiri@nvidia.com \
--cc=jiri@resnulli.us \
--cc=kalesh-anakkur.purayil@broadcom.com \
--cc=kuba@kernel.org \
--cc=maciej.fijalkowski@intel.com \
--cc=mateusz.polchlopek@intel.com \
--cc=michal.kubiak@intel.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=pio.raczynski@gmail.com \
--cc=piotr.raczynski@intel.com \
--cc=przemyslaw.kitszel@intel.com \
--cc=rafal.romanowski@intel.com \
--cc=shayd@nvidia.com \
--cc=sridhar.samudrala@intel.com \
--cc=wojciech.drewek@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).