netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Breno Leitao <leitao@debian.org>
To: Maksym Kutsevol <max@kutsevol.com>
Cc: "David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/2] netcons: Add udp send fail statistics to netconsole
Date: Tue, 27 Aug 2024 05:18:15 -0700	[thread overview]
Message-ID: <Zs3EB+p+Qq1nYObX@gmail.com> (raw)
In-Reply-To: <20240824215130.2134153-2-max@kutsevol.com>

On Sat, Aug 24, 2024 at 02:50:24PM -0700, Maksym Kutsevol wrote:
> Enhance observability of netconsole. UDP sends can fail. Start tracking at
> least two failure possibilities: ENOMEM and NET_XMIT_DROP for every target.
> Stats are exposed via an additional attribute in CONFIGFS.
> 
> The exposed statistics allows easier debugging of cases when netconsole
> messages were not seen by receivers, eliminating the guesswork if the
> sender thinks that messages in question were sent out.
> 
> Stats are not reset on enable/disable/change remote ip/etc, they
> belong to the netcons target itself.
> 
> Signed-off-by: Maksym Kutsevol <max@kutsevol.com>

Would you mind adding a "Reported-by" me in this case?

https://lore.kernel.org/all/ZsWoUzyK5du9Ffl+@gmail.com/

> diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c
> index 9c09293b5258..45c07ec7842d 100644
> --- a/drivers/net/netconsole.c
> +++ b/drivers/net/netconsole.c
> @@ -82,6 +82,13 @@ static DEFINE_SPINLOCK(target_list_lock);
>   */
>  static struct console netconsole_ext;
>  
> +#ifdef CONFIG_NETCONSOLE_DYNAMIC
> +struct netconsole_target_stats  {
> +	size_t xmit_drop_count;
> +	size_t enomem_count;

I am looking at other drivers, and they use a specific type for these
counters, u64_stats_sync.

if it is possible to use this format, then you can leverage the
`__u64_stats_update` helpers, and not worry about locking/overflow!?

> @@ -1015,6 +1035,25 @@ static struct notifier_block netconsole_netdev_notifier = {
>  	.notifier_call  = netconsole_netdev_event,
>  };
>  
> +/**
> + * count_udp_send_stats - Classify netpoll_send_udp result and count errors.
> + * @nt: target that was sent to
> + * @result: result of netpoll_send_udp
> + *
> + * Takes the result of netpoll_send_udp and classifies the type of error that
> + * occurred. Increments statistics in nt->stats accordingly.
> + */
> +static void count_udp_send_stats(struct netconsole_target *nt, int result)
> +{
> +#ifdef CONFIG_NETCONSOLE_DYNAMIC
> +	if (result == NET_XMIT_DROP) {
> +		nt->stats.xmit_drop_count++;

If you change the type, you can use the `u64_stats_inc` helper here.

> @@ -1126,7 +1167,11 @@ static void send_ext_msg_udp(struct netconsole_target *nt, const char *msg,
>  			this_offset += this_chunk;
>  		}
>  
> -		netpoll_send_udp(&nt->np, buf, this_header + this_offset);
> +		count_udp_send_stats(nt,
> +				     netpoll_send_udp(&nt->np,
> +						      buf,
> +						      this_header + this_offset)
> +		);

as Jakub said, this is not a format that is common in the Linux kenrel.

  parent reply	other threads:[~2024-08-27 12:18 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-08-24 21:50 [PATCH 1/2] netpoll: Make netpoll_send_udp return status instead of void Maksym Kutsevol
2024-08-24 21:50 ` [PATCH 2/2] netcons: Add udp send fail statistics to netconsole Maksym Kutsevol
2024-08-26 21:35   ` Jakub Kicinski
2024-08-26 23:55     ` Maksym Kutsevol
2024-08-27 13:59       ` Jakub Kicinski
2024-08-28 15:03         ` Maksym Kutsevol
2024-08-28 15:24           ` Breno Leitao
2024-08-28 15:33             ` Maksym Kutsevol
2024-08-27  6:32   ` kernel test robot
2024-08-27  9:36   ` kernel test robot
2024-08-27 12:18   ` Breno Leitao [this message]
2024-08-28 15:04     ` Maksym Kutsevol
     [not found]     ` <CAO6EAnVXXfQRK1xWoxO+dQwQsftw3bhOz27cQPNX=TzCutkrQQ@mail.gmail.com>
     [not found]       ` <Zs8//o3EDLtt+eTY@gmail.com>
2024-08-28 15:31         ` Maksym Kutsevol
2024-08-28 21:33 ` [PATCH v2 1/2] netpoll: Make netpoll_send_udp return status instead of void Maksym Kutsevol
2024-08-28 21:33   ` [PATCH v2 2/2] netcons: Add udp send fail statistics to netconsole Maksym Kutsevol
2024-08-30  8:45     ` Breno Leitao
2024-08-30 12:58       ` Maksym Kutsevol
2024-08-30 14:12         ` Breno Leitao
2024-08-30 15:37           ` Maksym Kutsevol
2024-08-28 22:57   ` [PATCH v2 1/2] netpoll: Make netpoll_send_udp return status instead of void Jakub Kicinski
2024-08-28 23:16     ` Maksym Kutsevol
2024-08-30  8:46   ` Breno Leitao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Zs3EB+p+Qq1nYObX@gmail.com \
    --to=leitao@debian.org \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=max@kutsevol.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).