Re: [PATCH v1 6/7] wifi: wlcore: sdio: Make use of irq_get_trigger_type()

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

On Tue, Sep 03, 2024 at 12:55:33AM +0200, Vasileios Amoiridis wrote:
> Convert irqd_get_trigger_type(irq_get_irq_data(irq)) cases to the more
> simple irq_get_trigger_type(irq).

...

>  	memset(res, 0x00, sizeof(res));
>  
>  	res[0].start = irq;
> -	res[0].flags = IORESOURCE_IRQ |
> -		       irqd_get_trigger_type(irq_get_irq_data(irq));
> +	res[0].flags = IORESOURCE_IRQ | irq_get_trigger_type(irq);
>  	res[0].name = "irq";


>  	if (wakeirq > 0) {
>  		res[1].start = wakeirq;
> -		res[1].flags = IORESOURCE_IRQ |
> -			       irqd_get_trigger_type(irq_get_irq_data(wakeirq));
> +		res[1].flags = IORESOURCE_IRQ | irq_get_trigger_type(wakeirq);
>  		res[1].name = "wakeirq";
>  		num_irqs = 2;

Since you are touching a lot here, consider also using macros from ioport.h,
i.e. DEFINE_RES_IRQ_NAMED().

This will become something like

	res[0] = DEFINE_RES_IRQ_NAMED(irq, "irq");
	res[0].flags |= irq_get_trigger_type(irq);

	if (wakeirq > 0) {
		res[1] = DEFINE_RES_IRQ_NAMED(wakeirq, "wakeirq");
		res[1].flags |= irq_get_trigger_type(wakeirq);

-- 
With Best Regards,
Andy Shevchenko