netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
To: Michal Schmidt <mschmidt@redhat.com>
Cc: intel-wired-lan@lists.osuosl.org, netdev@vger.kernel.org,
	pawel.chmielewski@intel.com, sridhar.samudrala@intel.com,
	jacob.e.keller@intel.com, pio.raczynski@gmail.com,
	konrad.knitter@intel.com, marcin.szycik@intel.com,
	wojciech.drewek@intel.com, nex.sw.ncis.nat.hpm.dev@intel.com,
	przemyslaw.kitszel@intel.com, jiri@resnulli.us, horms@kernel.org,
	David.Laight@aculab.com
Subject: Re: [Intel-wired-lan] [iwl-next v6 2/9] ice: devlink PF MSI-X max and min parameter
Date: Mon, 4 Nov 2024 08:02:51 +0100	[thread overview]
Message-ID: <ZyhxmxnxPcLk2ZcX@mev-dev.igk.intel.com> (raw)
In-Reply-To: <CADEbmW0=G8u7Y8L2fFTzan8S+Uz04nAMC+-dkj-rQb_izK88pg@mail.gmail.com>

On Thu, Oct 31, 2024 at 10:48:37PM +0100, Michal Schmidt wrote:
> On Mon, Oct 28, 2024 at 11:04 AM Michal Swiatkowski
> <michal.swiatkowski@linux.intel.com> wrote:
> >
> > Use generic devlink PF MSI-X parameter to allow user to change MSI-X
> > range.
> >
> > Add notes about this parameters into ice devlink documentation.
> >
> > Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
> > Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
> > ---
> >  Documentation/networking/devlink/ice.rst      | 11 +++
> >  .../net/ethernet/intel/ice/devlink/devlink.c  | 83 ++++++++++++++++++-
> >  drivers/net/ethernet/intel/ice/ice.h          |  7 ++
> >  drivers/net/ethernet/intel/ice/ice_irq.c      |  7 ++
> >  4 files changed, 107 insertions(+), 1 deletion(-)
> >
> > diff --git a/Documentation/networking/devlink/ice.rst b/Documentation/networking/devlink/ice.rst
> > index e3972d03cea0..792e9f8c846a 100644
> > --- a/Documentation/networking/devlink/ice.rst
> > +++ b/Documentation/networking/devlink/ice.rst
> > @@ -69,6 +69,17 @@ Parameters
> >
> >         To verify that value has been set:
> >         $ devlink dev param show pci/0000:16:00.0 name tx_scheduling_layers
> > +   * - ``msix_vec_per_pf_max``
> > +     - driverinit
> > +     - Set the max MSI-X that can be used by the PF, rest can be utilized for
> > +       SRIOV. The range is from min value set in msix_vec_per_pf_min to
> > +       2k/number of ports.
> > +   * - ``msix_vec_per_pf_min``
> > +     - driverinit
> > +     - Set the min MSI-X that will be used by the PF. This value inform how many
> > +       MSI-X will be allocated statically. The range is from 2 to value set
> > +       in msix_vec_per_pf_max.
> > +
> >  .. list-table:: Driver specific parameters implemented
> >      :widths: 5 5 90
> >
> > diff --git a/drivers/net/ethernet/intel/ice/devlink/devlink.c b/drivers/net/ethernet/intel/ice/devlink/devlink.c
> > index d1b9ccec5e05..29c1fec4fa93 100644
> > --- a/drivers/net/ethernet/intel/ice/devlink/devlink.c
> > +++ b/drivers/net/ethernet/intel/ice/devlink/devlink.c
> > @@ -1198,6 +1198,25 @@ static int ice_devlink_set_parent(struct devlink_rate *devlink_rate,
> >         return status;
> >  }
> >
> > +static void ice_set_min_max_msix(struct ice_pf *pf)
> > +{
> > +       struct devlink *devlink = priv_to_devlink(pf);
> > +       union devlink_param_value val;
> > +       int err;
> > +
> > +       err = devl_param_driverinit_value_get(devlink,
> > +                                             DEVLINK_PARAM_GENERIC_ID_MSIX_VEC_PER_PF_MIN,
> > +                                             &val);
> > +       if (!err)
> > +               pf->msix.min = val.vu16;
> > +
> > +       err = devl_param_driverinit_value_get(devlink,
> > +                                             DEVLINK_PARAM_GENERIC_ID_MSIX_VEC_PER_PF_MAX,
> > +                                             &val);
> > +       if (!err)
> > +               pf->msix.max = val.vu16;
> > +}
> > +
> >  /**
> >   * ice_devlink_reinit_up - do reinit of the given PF
> >   * @pf: pointer to the PF struct
> > @@ -1207,6 +1226,9 @@ static int ice_devlink_reinit_up(struct ice_pf *pf)
> >         struct ice_vsi *vsi = ice_get_main_vsi(pf);
> >         int err;
> >
> > +       /* load MSI-X values */
> > +       ice_set_min_max_msix(pf);
> > +
> >         err = ice_init_hw(&pf->hw);
> >         if (err) {
> >                 dev_err(ice_pf_to_dev(pf), "ice_init_hw failed: %d\n", err);
> > @@ -1526,6 +1548,37 @@ static int ice_devlink_local_fwd_validate(struct devlink *devlink, u32 id,
> >         return 0;
> >  }
> >
> > +static int
> > +ice_devlink_msix_max_pf_validate(struct devlink *devlink, u32 id,
> > +                                union devlink_param_value val,
> > +                                struct netlink_ext_ack *extack)
> > +{
> > +       struct ice_pf *pf = devlink_priv(devlink);
> > +
> > +       if (val.vu16 > pf->hw.func_caps.common_cap.num_msix_vectors ||
> > +           val.vu16 < pf->msix.min) {
> > +               NL_SET_ERR_MSG_MOD(extack, "Value is invalid");
> > +               return -EINVAL;
> > +       }
> > +
> > +       return 0;
> > +}
> > +
> > +static int
> > +ice_devlink_msix_min_pf_validate(struct devlink *devlink, u32 id,
> > +                                union devlink_param_value val,
> > +                                struct netlink_ext_ack *extack)
> > +{
> > +       struct ice_pf *pf = devlink_priv(devlink);
> > +
> > +       if (val.vu16 <= ICE_MIN_MSIX || val.vu16 > pf->msix.max) {
> > +               NL_SET_ERR_MSG_MOD(extack, "Value is invalid");
> > +               return -EINVAL;
> > +       }
> > +
> > +       return 0;
> > +}
> > +
> >  enum ice_param_id {
> >         ICE_DEVLINK_PARAM_ID_BASE = DEVLINK_PARAM_GENERIC_ID_MAX,
> >         ICE_DEVLINK_PARAM_ID_TX_SCHED_LAYERS,
> > @@ -1543,6 +1596,15 @@ static const struct devlink_param ice_dvl_rdma_params[] = {
> >                               ice_devlink_enable_iw_validate),
> >  };
> >
> > +static const struct devlink_param ice_dvl_msix_params[] = {
> > +       DEVLINK_PARAM_GENERIC(MSIX_VEC_PER_PF_MAX,
> > +                             BIT(DEVLINK_PARAM_CMODE_DRIVERINIT),
> > +                             NULL, NULL, ice_devlink_msix_max_pf_validate),
> > +       DEVLINK_PARAM_GENERIC(MSIX_VEC_PER_PF_MIN,
> > +                             BIT(DEVLINK_PARAM_CMODE_DRIVERINIT),
> > +                             NULL, NULL, ice_devlink_msix_min_pf_validate),
> > +};
> > +
> >  static const struct devlink_param ice_dvl_sched_params[] = {
> >         DEVLINK_PARAM_DRIVER(ICE_DEVLINK_PARAM_ID_TX_SCHED_LAYERS,
> >                              "tx_scheduling_layers",
> > @@ -1644,6 +1706,7 @@ void ice_devlink_unregister(struct ice_pf *pf)
> >  int ice_devlink_register_params(struct ice_pf *pf)
> >  {
> >         struct devlink *devlink = priv_to_devlink(pf);
> > +       union devlink_param_value value;
> >         struct ice_hw *hw = &pf->hw;
> >         int status;
> >
> > @@ -1652,11 +1715,27 @@ int ice_devlink_register_params(struct ice_pf *pf)
> >         if (status)
> >                 return status;
> >
> > +       status = devl_params_register(devlink, ice_dvl_msix_params,
> > +                                     ARRAY_SIZE(ice_dvl_msix_params));
> > +       if (status)
> > +               return status;
> > +
> >         if (hw->func_caps.common_cap.tx_sched_topo_comp_mode_en)
> >                 status = devl_params_register(devlink, ice_dvl_sched_params,
> >                                               ARRAY_SIZE(ice_dvl_sched_params));
> > +       if (status)
> > +               return status;
> >
> > -       return status;
> > +       value.vu16 = pf->msix.max;
> > +       devl_param_driverinit_value_set(devlink,
> > +                                       DEVLINK_PARAM_GENERIC_ID_MSIX_VEC_PER_PF_MAX,
> > +                                       value);
> > +       value.vu16 = pf->msix.min;
> > +       devl_param_driverinit_value_set(devlink,
> > +                                       DEVLINK_PARAM_GENERIC_ID_MSIX_VEC_PER_PF_MIN,
> > +                                       value);
> > +
> > +       return 0;
> >  }
> 
> 
> The type of the devlink parameters msix_vec_per_pf_{min,max} is
> specified as u32, so you must use value.vu32 everywhere you work with
> them, not vu16.
> 

I will change it.

> Michal
> 

  reply	other threads:[~2024-11-04  7:05 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-10-28 10:03 [iwl-next v6 0/9] ice: managing MSI-X in driver Michal Swiatkowski
2024-10-28 10:03 ` [iwl-next v6 1/9] ice: count combined queues using Rx/Tx count Michal Swiatkowski
2024-10-28 10:03 ` [iwl-next v6 2/9] ice: devlink PF MSI-X max and min parameter Michal Swiatkowski
2024-10-31 21:48   ` [Intel-wired-lan] " Michal Schmidt
2024-11-04  7:02     ` Michal Swiatkowski [this message]
2024-11-04  8:51       ` David Laight
2024-11-04  9:09         ` Small Integers: Big Penalty (was: [Intel-wired-lan] [iwl-next v6 2/9] ice: devlink PF MSI-X max and min parameter) Paul Menzel
2024-11-04  9:12           ` [Intel-wired-lan] Small Integers: Big Penalty Paul Menzel
2024-11-04 11:24             ` Michal Swiatkowski
2024-11-05 22:36               ` Keller, Jacob E
2024-10-31 21:58   ` [Intel-wired-lan] [iwl-next v6 2/9] ice: devlink PF MSI-X max and min parameter Michal Schmidt
2024-11-04  7:03     ` Michal Swiatkowski
2024-10-28 10:03 ` [iwl-next v6 3/9] ice: remove splitting MSI-X between features Michal Swiatkowski
2024-10-28 10:03 ` [iwl-next v6 4/9] ice: get rid of num_lan_msix field Michal Swiatkowski
2024-10-28 10:03 ` [iwl-next v6 5/9] ice, irdma: move interrupts code to irdma Michal Swiatkowski
2024-10-28 10:03 ` [iwl-next v6 6/9] ice: treat dyn_allowed only as suggestion Michal Swiatkowski
2024-10-28 10:03 ` [iwl-next v6 7/9] ice: enable_rdma devlink param Michal Swiatkowski
2024-10-28 10:03 ` [iwl-next v6 8/9] ice: simplify VF MSI-X managing Michal Swiatkowski
2024-10-28 10:03 ` [iwl-next v6 9/9] ice: init flow director before RDMA Michal Swiatkowski
2024-10-30 20:23 ` [iwl-next v6 0/9] ice: managing MSI-X in driver Jacob Keller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZyhxmxnxPcLk2ZcX@mev-dev.igk.intel.com \
    --to=michal.swiatkowski@linux.intel.com \
    --cc=David.Laight@aculab.com \
    --cc=horms@kernel.org \
    --cc=intel-wired-lan@lists.osuosl.org \
    --cc=jacob.e.keller@intel.com \
    --cc=jiri@resnulli.us \
    --cc=konrad.knitter@intel.com \
    --cc=marcin.szycik@intel.com \
    --cc=mschmidt@redhat.com \
    --cc=netdev@vger.kernel.org \
    --cc=nex.sw.ncis.nat.hpm.dev@intel.com \
    --cc=pawel.chmielewski@intel.com \
    --cc=pio.raczynski@gmail.com \
    --cc=przemyslaw.kitszel@intel.com \
    --cc=sridhar.samudrala@intel.com \
    --cc=wojciech.drewek@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).