netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andreas Roeseler <andreas.a.roeseler@gmail.com>
To: davem@davemloft.net
Cc: yoshfuji@linux-ipv6.org, dsahern@kernel.org, kuba@kernel.org,
	netdev@vger.kernel.org,
	Andreas Roeseler <andreas.a.roeseler@gmail.com>
Subject: [PATCH V4 net-next 5/5] icmp: add response to RFC 8335 PROBE messages
Date: Sun, 14 Mar 2021 09:48:49 -0700	[thread overview]
Message-ID: <a30d45c43a24f7b65febe51929e6fe990a904805.1615738432.git.andreas.a.roeseler@gmail.com> (raw)
In-Reply-To: <cover.1615738431.git.andreas.a.roeseler@gmail.com>

Modify the icmp_rcv function to check PROBE messages and call icmp_echo
if a PROBE request is detected.

Modify the existing icmp_echo function to respond ot both ping and PROBE
requests.

This was tested using a custom modification to the iputils package and
wireshark. It supports IPV4 probing by name, ifindex, and probing by
both IPV4 and IPV6 addresses. It currently does not support responding
to probes off the proxy node (see RFC 8335 Section 2).

Signed-off-by: Andreas Roeseler <andreas.a.roeseler@gmail.com>
---
Changes:
v1 -> v2:
 - Reorder variable declarations to follow coding style
 - Switch to functions such as dev_get_by_name and ip_dev_find to lookup
   net devices

v2 -> v3:
Suggested by Willem de Bruijn <willemdebruijn.kernel@gmail.com>
 - Add verification of incoming messages before looking up netdev
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
 - Include net/addrconf.h library for ipv6_dev_find

v3 -> v4:
Suggested by Willem de Bruijn <willemdebruijn.kernel@gmail.com>
 - Use skb_header_pointer to verify fields in incoming message
 - Add check to ensure that extobj_hdr.length is valid
 - Check to ensure object payload is padded with ASCII NULL characters
   when probing by name, as specified by RFC 8335
 - Statically allocate buff using IFNAMSIZ
 - Add rcu blocking around ipv6_dev_find
 - Use __in_dev_get_rcu to access IPV4 addresses of identified
   net_device
 - Remove check for ICMPV6 PROBE types
---
 net/ipv4/icmp.c | 145 +++++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 130 insertions(+), 15 deletions(-)

diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index 616e2dc1c8fa..f1530011b7bc 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -93,6 +93,10 @@
 #include <net/ip_fib.h>
 #include <net/l3mdev.h>
 
+#if IS_ENABLED(CONFIG_IPV6)
+#include <net/addrconf.h>
+#endif
+
 /*
  *	Build xmit assembly blocks
  */
@@ -971,7 +975,7 @@ static bool icmp_redirect(struct sk_buff *skb)
 }
 
 /*
- *	Handle ICMP_ECHO ("ping") requests.
+ *	Handle ICMP_ECHO ("ping") and ICMP_EXT_ECHO ("PROBE") requests.
  *
  *	RFC 1122: 3.2.2.6 MUST have an echo server that answers ICMP echo
  *		  requests.
@@ -979,27 +983,127 @@ static bool icmp_redirect(struct sk_buff *skb)
  *		  included in the reply.
  *	RFC 1812: 4.3.3.6 SHOULD have a config option for silently ignoring
  *		  echo requests, MUST have default=NOT.
+ *	RFC 8335: 8 MUST have a config option to enable/disable ICMP
+ *		  Extended Echo Functionality, MUST be disabled by default
  *	See also WRT handling of options once they are done and working.
  */
 
 static bool icmp_echo(struct sk_buff *skb)
 {
+	struct icmp_ext_hdr *ext_hdr, _ext_hdr;
+	struct icmp_ext_echo_iio *iio, _iio;
+	struct icmp_bxm icmp_param;
+	struct net_device *dev;
 	struct net *net;
+	u16 ident_len;
+	char *buff;
+	u8 status;
 
 	net = dev_net(skb_dst(skb)->dev);
-	if (!net->ipv4.sysctl_icmp_echo_ignore_all) {
-		struct icmp_bxm icmp_param;
-
-		icmp_param.data.icmph	   = *icmp_hdr(skb);
-		icmp_param.data.icmph.type = ICMP_ECHOREPLY;
-		icmp_param.skb		   = skb;
-		icmp_param.offset	   = 0;
-		icmp_param.data_len	   = skb->len;
-		icmp_param.head_len	   = sizeof(struct icmphdr);
-		icmp_reply(&icmp_param, skb);
-	}
 	/* should there be an ICMP stat for ignored echos? */
-	return true;
+	if (net->ipv4.sysctl_icmp_echo_ignore_all)
+		return true;
+
+	icmp_param.data.icmph	   = *icmp_hdr(skb);
+	icmp_param.skb		   = skb;
+	icmp_param.offset	   = 0;
+	icmp_param.data_len	   = skb->len;
+	icmp_param.head_len	   = sizeof(struct icmphdr);
+
+	if (icmp_param.data.icmph.type == ICMP_ECHO)
+		goto send_reply;
+	if (!net->ipv4.sysctl_icmp_echo_enable_probe)
+		return true;
+	/* We currently only support probing interfaces on the proxy node
+	 * Check to ensure L-bit is set
+	 */
+	if (!(ntohs(icmp_param.data.icmph.un.echo.sequence) & 1))
+		return true;
+	/* Clear status bits in reply message */
+	icmp_param.data.icmph.un.echo.sequence &= htons(0xFF00);
+	icmp_param.data.icmph.type = ICMP_EXT_ECHOREPLY;
+	ext_hdr = skb_header_pointer(skb, 0, sizeof(_ext_hdr), &_ext_hdr);
+	iio = skb_header_pointer(skb, sizeof(_ext_hdr), sizeof(_iio), &_iio);
+	if (!ext_hdr || !iio)
+		goto send_mal_query;
+	if (ntohs(iio->extobj_hdr.length) <= sizeof(iio->extobj_hdr))
+		goto send_mal_query;
+	ident_len = ntohs(iio->extobj_hdr.length) - sizeof(iio->extobj_hdr);
+	status = 0;
+	dev = NULL;
+	switch (iio->extobj_hdr.class_type) {
+	case EXT_ECHO_CTYPE_NAME:
+		if (ident_len >= IFNAMSIZ)
+			goto send_mal_query;
+		buff = kcalloc(IFNAMSIZ, sizeof(char), GFP_KERNEL);
+		if (!buff)
+			return -ENOMEM;
+		memcpy(buff, &iio->ident.name, ident_len);
+		/* RFC 8335 2.1 If the Object Payload would not otherwise terminate
+		 * on a 32-bit boundary, it MUST be padded with ASCII NULL characters
+		 */
+		if (ident_len % sizeof(u32) != 0) {
+			u8 i;
+
+			for (i = ident_len; i % sizeof(u32) != 0; i++) {
+				if (buff[i] != '\0')
+					goto send_mal_query;
+			}
+		}
+		dev = dev_get_by_name(net, buff);
+		kfree(buff);
+		break;
+	case EXT_ECHO_CTYPE_INDEX:
+		if (ident_len != sizeof(iio->ident.ifindex))
+			goto send_mal_query;
+		dev = dev_get_by_index(net, ntohl(iio->ident.ifindex));
+		break;
+	case EXT_ECHO_CTYPE_ADDR:
+		if (ident_len != sizeof(iio->ident.addr.ctype3_hdr) + iio->ident.addr.ctype3_hdr.addrlen)
+			goto send_mal_query;
+		switch (ntohs(iio->ident.addr.ctype3_hdr.afi)) {
+		case ICMP_AFI_IP:
+			if (ident_len != sizeof(iio->ident.addr.ctype3_hdr) + sizeof(struct in_addr))
+				goto send_mal_query;
+			dev = ip_dev_find(net, iio->ident.addr.ip_addr.ipv4_addr.s_addr);
+			break;
+#if IS_ENABLED(CONFIG_IPV6)
+		case ICMP_AFI_IP6:
+			if (ident_len != sizeof(iio->ident.addr.ctype3_hdr) + sizeof(struct in6_addr))
+				goto send_mal_query;
+			rcu_read_lock();
+			dev = ipv6_dev_find(net, &iio->ident.addr.ip_addr.ipv6_addr, dev);
+			if (dev)
+				dev_hold(dev);
+			rcu_read_unlock();
+			break;
+#endif
+		default:
+			goto send_mal_query;
+		}
+		break;
+	default:
+		goto send_mal_query;
+	}
+	if (!dev) {
+		icmp_param.data.icmph.code = ICMP_EXT_NO_IF;
+		goto send_reply;
+	}
+	/* Fill bits in reply message */
+	if (dev->flags & IFF_UP)
+		status |= EXT_ECHOREPLY_ACTIVE;
+	if (__in_dev_get_rcu(dev) && __in_dev_get_rcu(dev)->ifa_list)
+		status |= EXT_ECHOREPLY_IPV4;
+	if (!list_empty(&dev->ip6_ptr->addr_list))
+		status |= EXT_ECHOREPLY_IPV6;
+	dev_put(dev);
+	icmp_param.data.icmph.un.echo.sequence |= htons(status);
+send_reply:
+	icmp_reply(&icmp_param, skb);
+		return true;
+send_mal_query:
+	icmp_param.data.icmph.code = ICMP_EXT_MAL_QUERY;
+	goto send_reply;
 }
 
 /*
@@ -1088,6 +1192,11 @@ int icmp_rcv(struct sk_buff *skb)
 	icmph = icmp_hdr(skb);
 
 	ICMPMSGIN_INC_STATS(net, icmph->type);
+
+	/* Check for ICMP Extended Echo (PROBE) messages */
+	if (icmph->type == ICMP_EXT_ECHO)
+		goto probe;
+
 	/*
 	 *	18 is the highest 'known' ICMP type. Anything else is a mystery
 	 *
@@ -1097,7 +1206,6 @@ int icmp_rcv(struct sk_buff *skb)
 	if (icmph->type > NR_ICMP_TYPES)
 		goto error;
 
-
 	/*
 	 *	Parse the ICMP message
 	 */
@@ -1123,7 +1231,7 @@ int icmp_rcv(struct sk_buff *skb)
 	}
 
 	success = icmp_pointers[icmph->type].handler(skb);
-
+success_check:
 	if (success)  {
 		consume_skb(skb);
 		return NET_RX_SUCCESS;
@@ -1137,6 +1245,12 @@ int icmp_rcv(struct sk_buff *skb)
 error:
 	__ICMP_INC_STATS(net, ICMP_MIB_INERRORS);
 	goto drop;
+probe:
+	/* We can't use icmp_pointers[].handler() because it is an array of
+	 * size NR_ICMP_TYPES + 1 (19 elements) and PROBE has code 42.
+	 */
+	success = icmp_echo(skb);
+	goto success_check;
 }
 
 static bool ip_icmp_error_rfc4884_validate(const struct sk_buff *skb, int off)
@@ -1340,6 +1454,7 @@ static int __net_init icmp_sk_init(struct net *net)
 
 	/* Control parameters for ECHO replies. */
 	net->ipv4.sysctl_icmp_echo_ignore_all = 0;
+	net->ipv4.sysctl_icmp_echo_enable_probe = 0;
 	net->ipv4.sysctl_icmp_echo_ignore_broadcasts = 1;
 
 	/* Control parameter - ignore bogus broadcast responses? */
-- 
2.17.1


  parent reply	other threads:[~2021-03-14 16:49 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-14 16:48 [PATCH V4 net-next 0/5] add support for RFC 8335 PROBE Andreas Roeseler
2021-03-14 16:48 ` [PATCH V4 net-next 1/5] icmp: " Andreas Roeseler
2021-03-14 16:48 ` [PATCH V4 net-next 2/5] ICMPV6: " Andreas Roeseler
2021-03-14 16:48 ` [PATCH V4 net-next 3/5] net: add sysctl for enabling RFC 8335 PROBE messages Andreas Roeseler
2021-03-14 16:48 ` [PATCH V4 net-next 4/5] net: add support for sending " Andreas Roeseler
2021-03-14 16:48 ` Andreas Roeseler [this message]
2021-03-15 15:50   ` [PATCH V4 net-next 5/5] icmp: add response to " Willem de Bruijn
2021-03-15 19:09     ` Andreas Roeseler
2021-03-15 19:34       ` Willem de Bruijn
     [not found]   ` <202103150433.OwOTmI15-lkp@intel.com>
2021-03-18  3:11     ` Andreas Roeseler
2021-03-18  3:19       ` David Miller
2021-03-18  3:24         ` David Ahern
2021-03-20 16:01           ` Andreas Roeseler
2021-03-20 16:43             ` David Ahern

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a30d45c43a24f7b65febe51929e6fe990a904805.1615738432.git.andreas.a.roeseler@gmail.com \
    --to=andreas.a.roeseler@gmail.com \
    --cc=davem@davemloft.net \
    --cc=dsahern@kernel.org \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=yoshfuji@linux-ipv6.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).