From: Jacob Keller <jacob.e.keller@intel.com>
To: Fan Wu <fanwu01@zju.edu.cn>, <netdev@vger.kernel.org>
Cc: <przemyslaw.kitszel@intel.com>, <horms@kernel.org>,
<shenjian15@huawei.com>, <salil.mehta@huawei.com>,
<dingtianhong@huawei.com>, <andrew+netdev@lunn.ch>,
<davem@davemloft.net>, <edumazet@google.com>, <kuba@kernel.org>,
<pabeni@redhat.com>, <linux-kernel@vger.kernel.org>,
<stable@vger.kernel.org>
Subject: Re: [PATCH net] net: hip04: fix RX buffer leak on build_skb failure
Date: Tue, 14 Jul 2026 17:17:06 -0700 [thread overview]
Message-ID: <a361aa28-7f55-4476-9072-aa392a34b735@intel.com> (raw)
In-Reply-To: <20260712142729.2057636-1-fanwu01@zju.edu.cn>
On 7/12/2026 7:27 AM, Fan Wu wrote:
> When build_skb() fails in hip04_rx_poll(), the driver jumps to the
> refill path without releasing the current RX buffer and its DMA mapping.
> Installing a replacement buffer then overwrites the slot references and
> leaks both resources.
>
> Keep the current slot intact and return budget so NAPI retries the same
> buffer. Also free a newly allocated RX fragment when dma_map_single()
> fails.
>
> This issue was found by an in-house static analysis tool.
>
> Fixes: 701a0fd52318 ("hip04_eth: fix missing error handle for build_skb failed")
> Cc: stable@vger.kernel.org
> Assisted-by: Codex:gpt-5.5
> Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
> ---
>
You say this was found by static analysis. I imagine that build_skb
rarely fails (without some sort of fault injection). That means this is
likely difficult to reproduce in practice. I know we've been trying to
err on the side of increasing the burden of proof on AI-assisted fixes
like this.
Based on a quick search, it does seem that this drivers response of only
logging a debug message is not correct...
> drivers/net/ethernet/hisilicon/hip04_eth.c | 11 +++++++++--
> 1 file changed, 9 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ethernet/hisilicon/hip04_eth.c b/drivers/net/ethernet/hisilicon/hip04_eth.c
> index 18376bcc7..1d03039b4 100644
> --- a/drivers/net/ethernet/hisilicon/hip04_eth.c
> +++ b/drivers/net/ethernet/hisilicon/hip04_eth.c
> @@ -594,7 +594,10 @@ static int hip04_rx_poll(struct napi_struct *napi, int budget)
> skb = build_skb(buf, priv->rx_buf_size);
> if (unlikely(!skb)) {
> net_dbg_ratelimited("build_skb failed\n");
> - goto refill;
> + /* Retain the slot; return budget so NAPI retries this buffer.
> + * Refill would overwrite rx_buf[]/rx_phys[] and leak them.
> + */
> + return budget;
> }
>
> dma_unmap_single(priv->dev, priv->rx_phys[priv->rx_head],
> @@ -622,14 +625,15 @@ static int hip04_rx_poll(struct napi_struct *napi, int budget)
> rx++;
> }
>
> -refill:
> buf = netdev_alloc_frag(priv->rx_buf_size);
> if (!buf)
> goto done;
> phys = dma_map_single(priv->dev, buf,
> RX_BUF_SIZE, DMA_FROM_DEVICE);
> - if (dma_mapping_error(priv->dev, phys))
> + if (dma_mapping_error(priv->dev, phys)) {
> + skb_free_frag(buf);
> goto done;
> + }
> priv->rx_buf[priv->rx_head] = buf;
> priv->rx_phys[priv->rx_head] = phys;
> hip04_set_recv_desc(priv, phys);
>
>
next prev parent reply other threads:[~2026-07-15 0:17 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-12 14:27 [PATCH net] net: hip04: fix RX buffer leak on build_skb failure Fan Wu
2026-07-15 0:17 ` Jacob Keller [this message]
2026-07-15 7:30 ` Fan Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a361aa28-7f55-4476-9072-aa392a34b735@intel.com \
--to=jacob.e.keller@intel.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=dingtianhong@huawei.com \
--cc=edumazet@google.com \
--cc=fanwu01@zju.edu.cn \
--cc=horms@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=przemyslaw.kitszel@intel.com \
--cc=salil.mehta@huawei.com \
--cc=shenjian15@huawei.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox