Re: [PATCH net-next 1/3] net: dsa: add support for bridge flags

[Florian Fainelli <f.fainelli@gmail.com>]

On 2/17/2019 6:25 AM, Russell King wrote:
> The Linux bridge implementation allows various properties of the bridge
> to be controlled, such as flooding unknown unicast and multicast frames.
> This patch adds the necessary DSA infrastructure to allow the Linux
> bridge support to control these properties for DSA switches.
> 
> We implement this by providing two new methods: one to get the switch-
> wide support bitmask, and another to set the properties.
> 
> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
> ---

[snip]

>  
> +int dsa_port_bridge_flags(const struct dsa_port *dp, unsigned long flags,
> +			  struct switchdev_trans *trans)
> +{
> +	struct dsa_switch *ds = dp->ds;
> +	int port = dp->index;
> +
> +	if (switchdev_trans_ph_prepare(trans))
> +		return ds->ops->port_bridge_flags ? 0 : -EOPNOTSUPP;
> +
> +	if (ds->ops->port_bridge_flags)
> +		ds->ops->port_bridge_flags(ds, port, flags);

If you have a switch fabric with multiple switches, it seems to me that
you also need to make sure that the DSA and CPU ports will have
compatible flooding attribute, so just like the port_vlan_add()
callback, you probably need to make this a switch fabric-wide event and
use a notifier here. At least the DSA ports need to have MC flooding
turned on for an user port to also have MC flooding working.

Other than that LGTM.
-- 
Florian