netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lorenzo Bianconi <lorenzo@kernel.org>
To: netdev@vger.kernel.org
Cc: ilias.apalodimas@linaro.org, davem@davemloft.net,
	brouer@redhat.com, lorenzo.bianconi@redhat.com,
	grygorii.strashko@ti.com, kuba@kernel.org
Subject: [PATCH net-next] net: ethernet: ti: fix netdevice stats for XDP
Date: Wed,  3 Feb 2021 19:06:17 +0100	[thread overview]
Message-ID: <a457cb17dd9c58c116d64ee34c354b2e89c0ff8f.1612375372.git.lorenzo@kernel.org> (raw)

Align netdevice statistics when the device is running in XDP mode
to other upstream drivers. In particular reports to user-space rx
packets even if they are not forwarded to the networking stack
(XDP_PASS) but if they are redirected (XDP_REDIRECT), dropped (XDP_DROP)
or sent back using the same interface (XDP_TX). This patch allows the
system administrator to very the device is receiving data correctly.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
- this patch is compile-only tested
---
 drivers/net/ethernet/ti/cpsw.c      |  4 +---
 drivers/net/ethernet/ti/cpsw_new.c  |  4 +---
 drivers/net/ethernet/ti/cpsw_priv.c | 12 ++++++++++--
 drivers/net/ethernet/ti/cpsw_priv.h |  2 +-
 4 files changed, 13 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 5239318e9686..fd966567464c 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -403,12 +403,10 @@ static void cpsw_rx_handler(void *token, int len, int status)
 		xdp_prepare_buff(&xdp, pa, headroom, size, false);
 
 		port = priv->emac_port + cpsw->data.dual_emac;
-		ret = cpsw_run_xdp(priv, ch, &xdp, page, port);
+		ret = cpsw_run_xdp(priv, ch, &xdp, page, port, &len);
 		if (ret != CPSW_XDP_PASS)
 			goto requeue;
 
-		/* XDP prog might have changed packet data and boundaries */
-		len = xdp.data_end - xdp.data;
 		headroom = xdp.data - xdp.data_hard_start;
 
 		/* XDP prog can modify vlan tag, so can't use encap header */
diff --git a/drivers/net/ethernet/ti/cpsw_new.c b/drivers/net/ethernet/ti/cpsw_new.c
index 94747f82c60b..58a64313ac00 100644
--- a/drivers/net/ethernet/ti/cpsw_new.c
+++ b/drivers/net/ethernet/ti/cpsw_new.c
@@ -345,12 +345,10 @@ static void cpsw_rx_handler(void *token, int len, int status)
 
 		xdp_prepare_buff(&xdp, pa, headroom, size, false);
 
-		ret = cpsw_run_xdp(priv, ch, &xdp, page, priv->emac_port);
+		ret = cpsw_run_xdp(priv, ch, &xdp, page, priv->emac_port, &len);
 		if (ret != CPSW_XDP_PASS)
 			goto requeue;
 
-		/* XDP prog might have changed packet data and boundaries */
-		len = xdp.data_end - xdp.data;
 		headroom = xdp.data - xdp.data_hard_start;
 
 		/* XDP prog can modify vlan tag, so can't use encap header */
diff --git a/drivers/net/ethernet/ti/cpsw_priv.c b/drivers/net/ethernet/ti/cpsw_priv.c
index 99f44563e10f..bb59e768915e 100644
--- a/drivers/net/ethernet/ti/cpsw_priv.c
+++ b/drivers/net/ethernet/ti/cpsw_priv.c
@@ -1323,7 +1323,7 @@ int cpsw_xdp_tx_frame(struct cpsw_priv *priv, struct xdp_frame *xdpf,
 }
 
 int cpsw_run_xdp(struct cpsw_priv *priv, int ch, struct xdp_buff *xdp,
-		 struct page *page, int port)
+		 struct page *page, int port, int *len)
 {
 	struct cpsw_common *cpsw = priv->cpsw;
 	struct net_device *ndev = priv->ndev;
@@ -1341,10 +1341,13 @@ int cpsw_run_xdp(struct cpsw_priv *priv, int ch, struct xdp_buff *xdp,
 	}
 
 	act = bpf_prog_run_xdp(prog, xdp);
+	/* XDP prog might have changed packet data and boundaries */
+	*len = xdp->data_end - xdp->data;
+
 	switch (act) {
 	case XDP_PASS:
 		ret = CPSW_XDP_PASS;
-		break;
+		goto out;
 	case XDP_TX:
 		xdpf = xdp_convert_buff_to_frame(xdp);
 		if (unlikely(!xdpf))
@@ -1370,8 +1373,13 @@ int cpsw_run_xdp(struct cpsw_priv *priv, int ch, struct xdp_buff *xdp,
 		trace_xdp_exception(ndev, prog, act);
 		fallthrough;	/* handle aborts by dropping packet */
 	case XDP_DROP:
+		ndev->stats.rx_bytes += *len;
+		ndev->stats.rx_packets++;
 		goto drop;
 	}
+
+	ndev->stats.rx_bytes += *len;
+	ndev->stats.rx_packets++;
 out:
 	rcu_read_unlock();
 	return ret;
diff --git a/drivers/net/ethernet/ti/cpsw_priv.h b/drivers/net/ethernet/ti/cpsw_priv.h
index 7b7f3596b20d..a323bea54faa 100644
--- a/drivers/net/ethernet/ti/cpsw_priv.h
+++ b/drivers/net/ethernet/ti/cpsw_priv.h
@@ -438,7 +438,7 @@ int cpsw_ndo_bpf(struct net_device *ndev, struct netdev_bpf *bpf);
 int cpsw_xdp_tx_frame(struct cpsw_priv *priv, struct xdp_frame *xdpf,
 		      struct page *page, int port);
 int cpsw_run_xdp(struct cpsw_priv *priv, int ch, struct xdp_buff *xdp,
-		 struct page *page, int port);
+		 struct page *page, int port, int *len);
 irqreturn_t cpsw_tx_interrupt(int irq, void *dev_id);
 irqreturn_t cpsw_rx_interrupt(int irq, void *dev_id);
 irqreturn_t cpsw_misc_interrupt(int irq, void *dev_id);
-- 
2.29.2


             reply	other threads:[~2021-02-03 18:08 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-03 18:06 Lorenzo Bianconi [this message]
2021-02-06 18:49 ` [PATCH net-next] net: ethernet: ti: fix netdevice stats for XDP Jakub Kicinski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a457cb17dd9c58c116d64ee34c354b2e89c0ff8f.1612375372.git.lorenzo@kernel.org \
    --to=lorenzo@kernel.org \
    --cc=brouer@redhat.com \
    --cc=davem@davemloft.net \
    --cc=grygorii.strashko@ti.com \
    --cc=ilias.apalodimas@linaro.org \
    --cc=kuba@kernel.org \
    --cc=lorenzo.bianconi@redhat.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).