Re: [PATCH 1/2 net-next v3] ipv6: use the right ifindex when replying to icmpv6 from localhost

[David Ahern <dsahern@kernel.org>]

On 1/21/26 12:44 PM, Fernando Fernandez Mancera wrote:
> When replying to a ICMPv6 echo request that comes from localhost address
> the right output ifindex is 1 (lo) and not rt6i_idev dev index. Use the
> skb device ifindex instead. This fixes pinging to a local address from
> localhost source address.
> 
> $ ping6 -I ::1 2001:1:1::2 -c 3
> PING 2001:1:1::2 (2001:1:1::2) from ::1 : 56 data bytes
> 64 bytes from 2001:1:1::2: icmp_seq=1 ttl=64 time=0.037 ms
> 64 bytes from 2001:1:1::2: icmp_seq=2 ttl=64 time=0.069 ms
> 64 bytes from 2001:1:1::2: icmp_seq=3 ttl=64 time=0.122 ms
> 
> 2001:1:1::2 ping statistics
> 3 packets transmitted, 3 received, 0% packet loss, time 2032ms
> rtt min/avg/max/mdev = 0.037/0.076/0.122/0.035 ms
> 
> Fixes: 1b70d792cf67 ("ipv6: Use rt6i_idev index for echo replies to a local address")
> Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
> ---
> v2: no changes
> v3: use ipv6_addr_loopback() as it is more efficient
> ---
>  net/ipv6/icmp.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 


Reviewed-by: David Ahern <dsahern@kernel.org>