Netdev List
 help / color / mirror / Atom feed
From: Aswin Karuvally <aswin@linux.ibm.com>
To: Nagamani PV <nagamani@linux.ibm.com>,
	andrew+netdev@lunn.ch, davem@davemloft.net, edumazet@google.com,
	kuba@kernel.org, pabeni@redhat.com
Cc: wintera@linux.ibm.com, hca@linux.ibm.com, gor@linux.ibm.com,
	agordeev@linux.ibm.com, borntraeger@linux.ibm.com,
	svens@linux.ibm.com, kees@kernel.org, linux-s390@vger.kernel.org,
	netdev@vger.kernel.org
Subject: Re: [PATCH net v4 2/2] s390/ctcm: Fix use-after-free in channel_remove()
Date: Thu, 1 Oct 2026 17:05:38 +0530	[thread overview]
Message-ID: <a94e9796-7ec2-4ff7-b5b4-f6ca24107de9@linux.ibm.com> (raw)
In-Reply-To: <20260930070234.569500-3-nagamani@linux.ibm.com>

On 30/09/26 12:32, Nagamani PV wrote:
> channel_remove() uses fsm_deltimer() which calls timer_delete(),
> returning immediately even if the timer callback is running on
> another CPU. This leaves a window where fsm_expire_timer() accesses
> ch->fsm after kfree_fsm().
> 
> For MPC channels the teardown has a circular dependency:
> 
>   ch->timer callback -> ctcm_chx_txretry() -> mpc_action_go_inop()
>     -> tasklet_hi_schedule(&ch->ch_disc_tasklet)
> 
>   ch_tasklet -> ctcmpc_send_sweep_resp() -> fsm_addtimer(&ch->sweep_timer)
> 
>   sweep_timer callback -> fsm_addtimer(&ch->timer)
> 
> Use timer_shutdown_sync() for both timers: it waits for any running
> callback and permanently prevents rearming. Shut down sweep_timer
> first (its callback rearms ch->timer at ctcm_fsms.c), then
> ch->timer. Only then call tasklet_kill() -- catching any tasklet
> scheduled by an in-flight callback before shutdown.
> kfree(ch->discontact_th) follows tasklet_kill(ch_disc_tasklet) since
> ch->ccw[15].cda points to discontact_th and
> mpc_action_send_discontact() starts I/O through ch->ccw[15].
> 
> timer_shutdown_sync() is also used for non-MPC ch->timer:
> ctcm_chx_txretry() (CTC_STATE_TX + CTC_EVENT_TIMER) calls
> fsm_addtimer(&ch->timer) on both paths.
> 
> Depends on "s390/ctcm: Fix timer corruption in fsm_addtimer()" which
> replaces add_timer() with mod_timer(). mod_timer() on a shut-down
> timer is discarded; without it fsm_addtimer() calls timer_setup()
> defeating timer_shutdown_sync(). Backporting without that
> prerequisite is unsafe.
> 
> Fixes: 293d984f0e36 ("ctcm: infrastructure for replaced ctc driver")
> Cc: stable@vger.kernel.org # depends on: s390/ctcm: Fix timer corruption in fsm_addtimer()
> Reported-by: Sashiko <sashiko-bot@kernel.org>
> Link: https://sashiko.dev/#/patchset/20260922101913.239103-1-nagamani@linux.ibm.com?part=2
> Signed-off-by: Nagamani PV <nagamani@linux.ibm.com>
> ---
> Changes in v4:
> - Shut down timers before tasklet_kill() rather than after,
>   shutting down sweep_timer before ch->timer.
> - Use timer_shutdown_sync() for ch->timer on both MPC and non-MPC paths.
> - Name prerequisite by commit title and add structured stable tag
>   dependency (Jakub Kicinski).
> - Code changed; Reviewed-by and Tested-by dropped.
> 
> Changes in v3:
> - Kill ch_tasklet and ch_disc_tasklet before stopping the timers and
>   freeing ch->fsm: closes freed ch->fsm access from tasklet context and
>   eliminates tasklet-driven sweep_timer re-arm.
> - Shut down sweep_timer with timer_shutdown_sync() before deleting
>   ch->timer to prevent sweep_timer callback from re-arming ch->timer.
> - Move kfree(ch->discontact_th) after tasklet_kill(ch_disc_tasklet).
> - Drop Reviewed-by and Tested-by; please re-review and re-test the
>   new teardown order.
> 
> Changes in v2:
> - Add Fixes: and Cc: stable@vger.kernel.org tags.
> ---
>  drivers/s390/net/ctcm_main.c | 14 +++++++-------
>  1 file changed, 7 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/s390/net/ctcm_main.c b/drivers/s390/net/ctcm_main.c
> index 8b0d76a47d9f..27a22dbc9280 100644
> --- a/drivers/s390/net/ctcm_main.c
> +++ b/drivers/s390/net/ctcm_main.c
> @@ -211,9 +211,14 @@ static void channel_remove(struct channel *ch)
>  	while (*c) {
>  		if (*c == ch) {
>  			*c = ch->next;
> -			fsm_deltimer(&ch->timer);
>  			if (IS_MPC(ch))
> -				fsm_deltimer(&ch->sweep_timer);
> +				timer_shutdown_sync(&ch->sweep_timer.tl);
> +			timer_shutdown_sync(&ch->timer.tl);
> +			if (IS_MPC(ch)) {
> +				tasklet_kill(&ch->ch_tasklet);
> +				tasklet_kill(&ch->ch_disc_tasklet);
> +				kfree(ch->discontact_th);
> +			}
>  
>  			kfree_fsm(ch->fsm);
>  			clear_normalized_cda(&ch->ccw[4]);
> @@ -221,11 +226,6 @@ static void channel_remove(struct channel *ch)
>  				clear_normalized_cda(&ch->ccw[1]);
>  				dev_kfree_skb_any(ch->trans_skb);
>  			}
> -			if (IS_MPC(ch)) {
> -				tasklet_kill(&ch->ch_tasklet);
> -				tasklet_kill(&ch->ch_disc_tasklet);
> -				kfree(ch->discontact_th);
> -			}
>  			kfree(ch->ccw);
>  			kfree(ch->irb);
>  			kfree(ch);

Reviewed-by: Aswin Karuvally <aswin@linux.ibm.com>

  reply	other threads:[~2026-10-01 11:35 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-30  7:02 [PATCH net v4 0/2] s390/ctcm: Fix timer corruption and use-after-free Nagamani PV
2026-09-30  7:02 ` [PATCH net v4 1/2] s390/ctcm: Fix timer corruption in fsm_addtimer() Nagamani PV
2026-10-05 17:16   ` Simon Horman
2026-09-30  7:02 ` [PATCH net v4 2/2] s390/ctcm: Fix use-after-free in channel_remove() Nagamani PV
2026-10-01 11:35   ` Aswin Karuvally [this message]
2026-10-04  7:17   ` netdev-bot+sashiko
2026-10-05  8:48     ` Nagamani PV
2026-10-05 17:16   ` Simon Horman
2026-09-30  7:09 ` [PATCH net v4 0/2] s390/ctcm: Fix timer corruption and use-after-free netdev-bot+sinfo
2026-10-01  8:06   ` Nagamani PV
2026-10-06  0:34     ` Jakub Kicinski
2026-10-06  0:40 ` patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a94e9796-7ec2-4ff7-b5b4-f6ca24107de9@linux.ibm.com \
    --to=aswin@linux.ibm.com \
    --cc=agordeev@linux.ibm.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=borntraeger@linux.ibm.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=gor@linux.ibm.com \
    --cc=hca@linux.ibm.com \
    --cc=kees@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-s390@vger.kernel.org \
    --cc=nagamani@linux.ibm.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=svens@linux.ibm.com \
    --cc=wintera@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox