public inbox for netdev@vger.kernel.org
 help / color / mirror / Atom feed
From: Stanislav Fomichev <stfomichev@gmail.com>
To: Taehee Yoo <ap420073@gmail.com>
Cc: davem@davemloft.net, kuba@kernel.org, pabeni@redhat.com,
	edumazet@google.com, andrew+netdev@lunn.ch, horms@kernel.org,
	michael.chan@broadcom.com, pavan.chebbi@broadcom.com,
	almasrymina@google.com, sdf@fomichev.me, netdev@vger.kernel.org
Subject: Re: [PATCH net-next] eth: bnxt: add netmem TX support
Date: Tue, 17 Jun 2025 13:27:47 -0700	[thread overview]
Message-ID: <aFHPw5pjyA9yIepf@mini-arch> (raw)
In-Reply-To: <20250617094540.819832-1-ap420073@gmail.com>

On 06/17, Taehee Yoo wrote:
> Use netmem_dma_*() helpers and declare netmem_tx to support netmem TX.
> By this change, all bnxt devices will support the netmem TX.
> 
> bnxt_start_xmit() uses memcpy() if a packet is too small. However,
> netmem packets are unreadable, so memcpy() is not allowed.
> It should check whether an skb is readable, and if an SKB is unreadable,
> it is processed by the normal transmission logic.
> 
> netmem TX can be tested with ncdevmem.c
> 
> Signed-off-by: Taehee Yoo <ap420073@gmail.com>
> ---
>  drivers/net/ethernet/broadcom/bnxt/bnxt.c | 28 ++++++++++++++---------
>  1 file changed, 17 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
> index 869580b6f70d..4de9dc123a18 100644
> --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
> +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
> @@ -477,6 +477,7 @@ static netdev_tx_t bnxt_start_xmit(struct sk_buff *skb, struct net_device *dev)
>  	struct bnxt_tx_ring_info *txr;
>  	struct bnxt_sw_tx_bd *tx_buf;
>  	__le32 lflags = 0;
> +	skb_frag_t *frag;
>  
>  	i = skb_get_queue_mapping(skb);
>  	if (unlikely(i >= bp->tx_nr_rings)) {
> @@ -563,7 +564,7 @@ static netdev_tx_t bnxt_start_xmit(struct sk_buff *skb, struct net_device *dev)
>  		lflags |= cpu_to_le32(TX_BD_FLAGS_NO_CRC);
>  
>  	if (free_size == bp->tx_ring_size && length <= bp->tx_push_thresh &&
> -	    !lflags) {
> +	    skb_frags_readable(skb) && !lflags) {
>  		struct tx_push_buffer *tx_push_buf = txr->tx_push;
>  		struct tx_push_bd *tx_push = &tx_push_buf->push_bd;
>  		struct tx_bd_ext *tx_push1 = &tx_push->txbd2;
> @@ -598,9 +599,9 @@ static netdev_tx_t bnxt_start_xmit(struct sk_buff *skb, struct net_device *dev)
>  		skb_copy_from_linear_data(skb, pdata, len);
>  		pdata += len;
>  		for (j = 0; j < last_frag; j++) {
> -			skb_frag_t *frag = &skb_shinfo(skb)->frags[j];
>  			void *fptr;
>  
> +			frag = &skb_shinfo(skb)->frags[j];
>  			fptr = skb_frag_address_safe(frag);
>  			if (!fptr)
>  				goto normal_tx;
> @@ -708,8 +709,7 @@ static netdev_tx_t bnxt_start_xmit(struct sk_buff *skb, struct net_device *dev)
>  			cpu_to_le32(cfa_action << TX_BD_CFA_ACTION_SHIFT);
>  	txbd0 = txbd;
>  	for (i = 0; i < last_frag; i++) {
> -		skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
> -
> +		frag = &skb_shinfo(skb)->frags[i];
>  		prod = NEXT_TX(prod);
>  		txbd = &txr->tx_desc_ring[TX_RING(bp, prod)][TX_IDX(prod)];
>  
> @@ -721,7 +721,8 @@ static netdev_tx_t bnxt_start_xmit(struct sk_buff *skb, struct net_device *dev)
>  			goto tx_dma_error;
>  
>  		tx_buf = &txr->tx_buf_ring[RING_TX(bp, prod)];
> -		dma_unmap_addr_set(tx_buf, mapping, mapping);
> +		netmem_dma_unmap_addr_set(skb_frag_netmem(frag), tx_buf,
> +					  mapping, mapping);
>  
>  		txbd->tx_bd_haddr = cpu_to_le64(mapping);
>  
> @@ -778,9 +779,11 @@ static netdev_tx_t bnxt_start_xmit(struct sk_buff *skb, struct net_device *dev)
>  	for (i = 0; i < last_frag; i++) {
>  		prod = NEXT_TX(prod);
>  		tx_buf = &txr->tx_buf_ring[RING_TX(bp, prod)];
> -		dma_unmap_page(&pdev->dev, dma_unmap_addr(tx_buf, mapping),
> -			       skb_frag_size(&skb_shinfo(skb)->frags[i]),
> -			       DMA_TO_DEVICE);
> +		frag = &skb_shinfo(skb)->frags[i];
> +		netmem_dma_unmap_page_attrs(&pdev->dev,
> +					    dma_unmap_addr(tx_buf, mapping),
> +					    skb_frag_size(frag),
> +					    DMA_TO_DEVICE, 0);
>  	}
>  
>  tx_free:
> @@ -3422,9 +3425,11 @@ static void bnxt_free_one_tx_ring_skbs(struct bnxt *bp,
>  			skb_frag_t *frag = &skb_shinfo(skb)->frags[j];
>  
>  			tx_buf = &txr->tx_buf_ring[ring_idx];
> -			dma_unmap_page(&pdev->dev,
> -				       dma_unmap_addr(tx_buf, mapping),
> -				       skb_frag_size(frag), DMA_TO_DEVICE);
> +			netmem_dma_unmap_page_attrs(&pdev->dev,
> +						    dma_unmap_addr(tx_buf,
> +								   mapping),
> +						    skb_frag_size(frag),
> +						    DMA_TO_DEVICE, 0);
>  		}
>  		dev_kfree_skb(skb);
>  	}
> @@ -16713,6 +16718,7 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
>  	if (BNXT_SUPPORTS_QUEUE_API(bp))
>  		dev->queue_mgmt_ops = &bnxt_queue_mgmt_ops;
>  	dev->request_ops_lock = true;
> +	dev->netmem_tx = true;
>  
>  	rc = register_netdev(dev);
>  	if (rc)

Acked-by: Stanislav Fomichev <sdf@fomichev.me>

Similar to what I had internally for testing. One thing to think about
here might be to put that netmem_tx=true under BNXT_SUPPORTS_QUEUE_API
conditional. This way both rx/tx will either be supported or not. But
since there is probably no real FW requirement for TX, should be good
as is.

  parent reply	other threads:[~2025-06-17 20:27 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-17  9:45 [PATCH net-next] eth: bnxt: add netmem TX support Taehee Yoo
2025-06-17 20:14 ` Mina Almasry
2025-06-18 13:20   ` Taehee Yoo
2025-06-17 20:27 ` Stanislav Fomichev [this message]
2025-06-18 13:42   ` Taehee Yoo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aFHPw5pjyA9yIepf@mini-arch \
    --to=stfomichev@gmail.com \
    --cc=almasrymina@google.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=ap420073@gmail.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=horms@kernel.org \
    --cc=kuba@kernel.org \
    --cc=michael.chan@broadcom.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=pavan.chebbi@broadcom.com \
    --cc=sdf@fomichev.me \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox