From: Daniel Golle <daniel@makrotopia.org>
To: Jakub Kicinski <kuba@kernel.org>
Cc: Vladimir Oltean <vladimir.oltean@nxp.com>,
netdev@vger.kernel.org, Hauke Mehrtens <hauke@hauke-m.de>,
Andrew Lunn <andrew@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Paolo Abeni <pabeni@redhat.com>
Subject: Re: [PATCH net 0/2] lantiq_gswip fixes
Date: Sat, 20 Sep 2025 02:07:25 +0100 [thread overview]
Message-ID: <aM3-Tf9kHkNP2XRN@pidgin.makrotopia.org> (raw)
In-Reply-To: <20250919165008.247549ab@kernel.org>
[-- Attachment #1: Type: text/plain, Size: 1897 bytes --]
Hi Vladimir,
Hi Jakub,
sorry for the late reply.
I got both patches in my testing tree for long time and can confirm that
both are fixing real issues.
On Fri, Sep 19, 2025 at 04:50:08PM -0700, Jakub Kicinski wrote:
> On Thu, 18 Sep 2025 10:21:40 +0300 Vladimir Oltean wrote:
> > This is a small set of fixes which I believe should be backported for
> > the lantiq_gswip driver. Daniel Golle asked me to submit them here:
> > https://lore.kernel.org/netdev/aLiDfrXUbw1O5Vdi@pidgin.makrotopia.org/
> >
> > As mentioned there, a merge conflict with net-next is expected, due to
> > the movement of the driver to the 'drivers/net/dsa/lantiq' folder there.
> > Good luck :-/
> >
> > Patch 2/2 fixes an old regression and is the minimal fix for that, as
> > discussed here:
> > https://lore.kernel.org/netdev/aJfNMLNoi1VOsPrN@pidgin.makrotopia.org/
> >
> > Patch 1/2 was identified by me through static analysis, and I consider
> > it to be a serious deficiency. It needs a test tag.
>
> Daniel, can we count on your for that?
I have now built the 'net' tree with only the two patches on top, and run
local_termination.sh for basic testing before and after. I've attached the
results of both test runs, before and after applying both patches.
Consider the whole series
Tested-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
I hope we can proceed with the other important fixes Vladimir has pulled
out of his slieve[1], however, I agree that not all of them should go via
the 'net' tree, and I suppose (speaking for all of OpenWrt, which is the
main user when it comes to devices with Lantiq SoC containing those
switches) that going via net-next is fine -- we can still backport
individual commits, or even all of them, and apply them on OpenWrt's
current Linux 6.12 kernel sources.
[1]: https://github.com/vladimiroltean/linux/commits/lantiq-gswip/
[-- Attachment #2: before.txt --]
[-- Type: text/plain, Size: 48001 bytes --]
(AVM) EVA Revision: 1.1964 Version: 2964
(C) Copyright 2005 AVM Date: Nov 27 2013 Time: 14:33:10 (0) 3 0x0-0x740D
[FLASH:] MACRONIX Uniform-Flash 1MB 256 Bytes WriteBuffer
[FLASH:](Eraseregion [0] 16 sectors a 64kB)
[NAND:] 512MB MICRON 2048 Pagesize 128k Blocksize 4096 Blocks 8Bit 1 CS HW
[SYSTEM:] VR9 on 500MHz/250MHz/250MHz
.Atheros 8030/35 detected
Eva_AVM >##..................................................................
[ 0.000000] Linux version 6.17.0-rc5+ (daniel@mixxxtop) (mips-openwrt-linux-gnu-gcc (OpenWrt GCC 14.3.0 r30716+1-56b083221f) 14.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Thu Sep 4 23:19:13 2025
[ 0.000000] SoC: xRX200 rev 1.2
[ 0.000000] printk: legacy bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019556 (MIPS 34Kc)
[ 0.000000] MIPS: machine is AVM FRITZ!Box 7490 (Micron NAND)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT
[ 0.000000] Detected 1 available secondary CPU(s)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] percpu: Embedded 12 pages/cpu s18224 r8192 d22736 u49152
[ 0.000000] Kernel command line: console=ttyLTQ0,115200
[ 0.000000] printk: log buffer data + meta data: 131072 + 409600 = 540672 bytes
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[ 0.000000] Writing ErrCtl register=00042003
[ 0.000000] Readback ErrCtl register=00042003
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 65536
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.
[ 0.000000] NR_IRQS: 256
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] CPU Clock: 500MHz
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041786 ns
[ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 21474836475000000ns
[ 0.010000] Calibrating delay loop... 331.77 BogoMIPS (lpj=1658880)
[ 0.070000] pid_max: default: 32768 minimum: 301
[ 0.090000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.100000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.130000] rcu: Hierarchical SRCU implementation.
[ 0.140000] rcu: Max phase no-delay instances is 1000.
[ 0.140000] smp: Bringing up secondary CPUs ...
[ 0.150000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.150000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.150000] CPU1 revision is: 00019556 (MIPS 34Kc)
[ 0.200000] Counter synchronization [CPU#0 -> CPU#1]: passed
[ 0.210000] smp: Brought up 1 node, 2 CPUs
[ 0.210000] Memory: 246400K/262144K available (8707K kernel code, 638K rwdata, 1068K rodata, 1284K init, 219K bss, 14608K reserved, 0K cma-reserved)
[ 0.230000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.240000] posixtimers hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.240000] futex hash table entries: 512 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear).
[ 0.260000] pinctrl core: initialized pinctrl subsystem
[ 0.270000] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.280000] dcdc-xrx200 1f106a00.dcdc: Core Voltage : 1016 mV
[ 0.290000] /fpi@10000000/pinmux@e100b10: Fixed dependency cycle(s) with /fpi@10000000/pinmux@e100b10/pinmux
[ 0.300000] pinctrl-xway 1e100b10.pinmux: Init done
[ 0.310000] dma-xway 1e104100.dma: Init done - hw rev: 7, ports: 7, channels: 28
[ 0.330000] usbcore: registered new interface driver usbfs
[ 0.340000] usbcore: registered new interface driver hub
[ 0.340000] usbcore: registered new device driver usb
[ 0.350000] clocksource: Switched to clocksource MIPS
[ 0.370000] NET: Registered PF_INET protocol family
[ 0.370000] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.380000] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 0.390000] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.400000] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.410000] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.410000] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.420000] MPTCP token hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.430000] UDP hash table entries: 256 (order: 1, 14336 bytes, linear)
[ 0.440000] UDP-Lite hash table entries: 256 (order: 1, 14336 bytes, linear)
[ 0.440000] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.450000] PCI: CLS 0 bytes, default 32
[ 0.450000] gptu: totally 6 16-bit timers/counters
[ 0.460000] gptu: misc_register on minor 256
[ 0.460000] gptu: succeeded to request irq 126
[ 0.470000] gptu: succeeded to request irq 127
[ 0.470000] gptu: succeeded to request irq 128
[ 0.480000] gptu: succeeded to request irq 129
[ 0.480000] gptu: succeeded to request irq 130
[ 0.490000] gptu: succeeded to request irq 131
[ 0.490000] No VPEs reserved for AP/SP, not initialize VPE loader
[ 0.490000] Pass maxvpes=<n> argument as kernel argument
[ 0.500000] No TCs reserved for AP/SP, not initializing RTLX.
[ 0.500000] Pass maxtcs=<n> argument as kernel argument
[ 0.520000] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[ 0.530000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.540000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.560000] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc
[ 0.570000] printk: legacy console [ttyLTQ0] enabled
[ 0.570000] printk: legacy console [ttyLTQ0] enabled
[ 0.580000] printk: legacy bootconsole [early0] disabled
[ 0.580000] printk: legacy bootconsole [early0] disabled
[ 0.600000] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xdc
[ 0.600000] nand: Micron MT29F4G08ABADAWP
[ 0.600000] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 0.620000] Scanning device for bad blocks
[ 0.670000] Bad eraseblock 660 at 0x000005280000
[ 0.670000] Bad eraseblock 692 at 0x000005680000
[ 0.910000] 2 fixed-partitions partitions found on MTD device 14000000.nand
[ 0.920000] Creating 2 MTD partitions on "14000000.nand":
[ 0.920000] 0x000000000000-0x000000400000 : "kernel"
[ 0.930000] 0x000000400000-0x000020000000 : "ubi"
[ 0.950000] spi-lantiq-ssc 1e100800.spi: Lantiq SSC SPI controller (Rev 8, TXFS 8, RXFS 8, DMA 1)
[ 0.960000] spi-nor spi0.4: supply vcc not found, using dummy regulator
[ 0.970000] 3 fixed-partitions partitions found on MTD device spi0.4
[ 0.970000] Creating 3 MTD partitions on "spi0.4":
[ 0.980000] 0x000000000000-0x000000040000 : "urlader"
[ 0.980000] 0x000000040000-0x0000000a0000 : "tffs (1)"
[ 0.990000] 0x0000000a0000-0x000000100000 : "tffs (2)"
[ 1.010000] NET: Registered PF_INET6 protocol family
[ 1.030000] Segment Routing with IPv6
[ 1.030000] In-situ OAM (IOAM) with IPv6
[ 1.040000] NET: Registered PF_PACKET protocol family
[ 1.040000] 8021q: 802.1Q VLAN Support v1.8
[ 1.110000] pcie-xrx200 1d900000.pcie: switch pcie endianess requested
[ 1.260000] PCI host bridge to bus 0000:00
[ 1.260000] pci_bus 0000:00: root bus resource [mem 0x1c000000-0x1cffffff]
[ 1.270000] pci_bus 0000:00: root bus resource [io 0x1d800000-0x1d8fffff]
[ 1.270000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 1.280000] ifx_pcie_rc_class_early_fixup: fixed pcie host bridge to pci-pci bridge
[ 1.300000] pci 0000:00:00.0: 0x80848e10 took 17148 usecs
[ 1.300000] pci 0000:00:00.0: [1bef:0011] type 01 class 0x060400 PCIe Root Port
[ 1.310000] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 1.310000] pci 0000:00:00.0: bridge window [io 0x1d800000-0x1d8fffff]
[ 1.320000] pci 0000:00:00.0: bridge window [mem 0x1c000000-0x1cffffff]
[ 1.330000] pci 0000:00:00.0: bridge window [mem 0x1c000000-0x1cffffff pref]
[ 1.340000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 1.340000] pci 0000:01:00.0: [1912:0015] type 00 class 0x0c0330 PCIe Endpoint
[ 1.350000] pci 0000:01:00.0: BAR 0 [mem 0x00000000-0x00001fff 64bit]
[ 1.360000] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 1.360000] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
[ 1.380000] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 1.380000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
[ 1.390000] pci 0000:00:00.0: bridge window [mem 0x1c000000-0x1c0fffff]: assigned
[ 1.400000] pci 0000:01:00.0: BAR 0 [mem 0x1c000000-0x1c001fff 64bit]: assigned
[ 1.400000] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.410000] pci 0000:00:00.0: bridge window [mem 0x1c000000-0x1c0fffff]
[ 1.420000] ifx_pcie_bios_map_irq port 0 dev 0000:00:00.0 slot 0 pin 1
[ 1.420000] ifx_pcie_bios_map_irq dev 0000:00:00.0 irq 144 assigned
[ 1.430000] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[ 1.440000] pci 0000:01:00.0: enabling device (0000 -> 0002)
[ 7.190000] pci 0000:01:00.0: xHCI HW not ready after 5 sec (HC bug?) status = 0x801
[ 7.190000] pci 0000:01:00.0: 0x805ad224 took 5623107 usecs
[ 7.200000] UBI: auto-attach mtd1
[ 7.200000] ubi0: attaching mtd1
[ 8.880000] ubi0: scanning is finished
[ 8.900000] ubi0: attached mtd1 (name "ubi", size 508 MiB)
[ 8.910000] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
[ 8.910000] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[ 8.920000] ubi0: VID header offset: 512 (aligned 512), data offset: 2048
[ 8.930000] ubi0: good PEBs: 4062, bad PEBs: 2, corrupted PEBs: 0
[ 8.930000] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 8.940000] ubi0: max/mean erase counter: 14/6, WL threshold: 4096, image sequence number: 699232088
[ 8.950000] ubi0: available PEBs: 0, total reserved PEBs: 4062, PEBs reserved for bad PEB handling: 78
[ 8.960000] ubi0: background thread "ubi_bgt0d" started, PID 310
[ 8.960000] block ubiblock0_0: created from ubi0:0(rootfs)
[ 8.970000] ubiblock: device ubiblock0_0 (rootfs) set to be root files[ 8.980000] check access for rdinit=/init failed: -2, ignoring
[ 8.990000] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 9.000000] Freeing unused kernel image (initmem) memory: 1284K
[ 9.000000] This architecture does not have kernel memory protection.
[ 9.010000] Run /sbin/init as init process
[ 10.410000] init: Console is alive
[ 10.410000] init: - watchdog -
[ 11.370000] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 11.640000] SCSI subsystem initialized
[ 11.660000] ifx_pcie_bios_map_irq port 0 dev 0000:01:00.0 slot 0 pin 1
[ 11.660000] ifx_pcie_bios_map_irq dev 0000:01:00.0 irq 144 assigned
[ 11.670000] ifx_pcie_bios_map_irq port 0 dev 0000:01:00.0 slot 0 pin 1
[ 11.680000] ifx_pcie_bios_map_irq dev 0000:01:00.0 irq 144 assigned
[ 12.120000] xhci-pci-renesas 0000:01:00.0: xHCI Host Controller
[ 12.130000] xhci-pci-renesas 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 12.140000] xhci-pci-renesas 0000:01:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x0000000100000090
[ 12.150000] xhci-pci-renesas 0000:01:00.0: xHCI Host Controller
[ 12.150000] xhci-pci-renesas 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 12.160000] xhci-pci-renesas 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 12.170000] hub 1-0:1.0: USB hub found
[ 12.170000] hub 1-0:1.0: 2 ports detected
[ 12.180000] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 12.190000] hub 2-0:1.0: USB hub found
[ 12.190000] hub 2-0:1.0: 2 ports detected
[ 12.210000] usbcore: registered new interface driver usb-storage
[ 12.220000] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 12.230000] init: - preinit -
[ 13.310000] usb 2-2: new SuperSpeed USB device number 2 using xhci-pci-renesas
[ 15.520000] random: crng init done
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 23.070000] UBIFS (ubi0:1): Mounting in unauthenticated mode
[ 23.080000] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 482
[ 23.130000] UBIFS (ubi0:1): recovery needed
[ 23.250000] UBIFS (ubi0:1): recovery completed
[ 23.250000] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 23.260000] UBIFS (ubi0:1): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 23.270000] UBIFS (ubi0:1): FS size: 452616192 bytes (431 MiB, 3508 LEBs), max 3523 LEBs, journal size 22708224 bytes (21 MiB, 176 LEBs)
[ 23.280000] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
[ 23.290000] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID BCD8DFDD-8055-4773-BDB8-AAC44BCE2457, small LPT model
[ 23.300000] mount_root: switching to ubifs overlay
[ 23.320000] urandom-seed: Seeding with /etc/urandom.seed
[ 23.480000] procd: - early -
[ 23.480000] procd: - watchdog -
[ 24.320000] procd: - watchdog -
[ 24.330000] procd: - ubus -
[ 24.530000] procd: - init -
Please press Enter to activate this console.
[ 26.840000] kmodloader: loading kernel modules from /etc/modules.d/*
[ 28.830000] urngd: v1.0.2 started.
[ 29.290000] gswip 1e108000.switch: configuring for fixed/internal link mode
[ 29.300000] gswip 1e108000.switch: Link is Up - 1Gbps/Full - flow control off
[ 29.390000] gswip 1e108000.switch lan3 (uninitialized): PHY [1e108000.switch-mii:00] driver [Qualcomm Atheros AR8035] (irq=POLL)
[ 29.490000] gswip 1e108000.switch lan4 (uninitialized): PHY [1e108000.switch-mii:01] driver [Qualcomm Atheros AR8035] (irq=POLL)
[ 29.520000] gswip 1e108000.switch lan2 (uninitialized): PHY [1e108000.switch-mii:11] driver [Intel XWAY PHY11G (xRX v1.2 integrated)] (irq=POLL)
[ 29.580000] gswip 1e108000.switch lan1 (uninitialized): PHY [1e108000.switch-mii:13] driver [Intel XWAY PHY11G (xRX v1.2 integrated)] (irq=POLL)
[ 29.610000] lantiq,xrx200-net 1e10b308.eth eth0: entered promiscuous mode
[ 29.620000] DSA: tree 0 setup
[ 29.620000] gswip 1e108000.switch: probed GSWIP version 21 mod 0
[ 29.660000] GACT probability on
[ 29.680000] Mirror/redirect action on
[ 29.740000] u32 classifier
[ 29.740000] input device check on
[ 29.750000] Actions configured
[ 30.200000] mdio_netlink: loading out-of-tree module taints kernel.
[ 30.270000] usbcore: registered new device driver r8152-cfgselector
[ 30.460000] r8152-cfgselector 2-2: reset SuperSpeed USB device number 2 using xhci-pci-renesas
[ 30.940000] r8152 2-2:1.0 eth1: v1.12.13
[ 30.940000] usbcore: registered new interface driver r8152
[ 30.960000] usbcore: registered new interface driver rtl8150
[ 30.990000] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 39.590000] br-lan: port 1(eth1) entered blocking state
[ 39.590000] br-lan: port 1(eth1) entered disabled state
[ 39.590000] r8152 2-2:1.0 eth1: entered allmulticast mode
[ 39.600000] r8152 2-2:1.0 eth1: entered promiscuous mode
[ 39.680000] br-lan: port 1(eth1) entered blocking state
[ 39.680000] br-lan: port 1(eth1) entered forwarding state
[ 40.490000] br-lan: port 1(eth1) entered disabled state
[ 43.360000] r8152 2-2:1.0 eth1: Promiscuous mode enabled
[ 43.360000] r8152 2-2:1.0 eth1: carrier on
[ 43.370000] br-lan: port 1(eth1) entered blocking state
[ 43.380000] br-lan: port 1(eth1) entered forwarding state
BusyBox v1.37.0 (2025-09-04 23:19:13 UTC) built-in shell (ash)
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
OpenWrt SNAPSHOT, r30959+10-b4294bc980
-----------------------------------------------------
=== WARNING! =====================================
There is no root password defined on this device!
Use the "passwd" command to set up a new password
in order to prevent unauthorized SSH logins.
--------------------------------------------------
OpenWrt recently switched to the "apk" package manager!
OPKG Command APK Equivalent Description
------------------------------------------------------------------
opkg install <pkg> apk add <pkg> Install a package
opkg remove <pkg> apk del <pkg> Remove a package
opkg upgrade apk upgrade Upgrade all packages
opkg files <pkg> apk info -L <pkg> List package contents
opkg list-installed apk info List installed packages
opkg update apk update Update package lists
opkg search <pkg> apk search <pkg> Search for packages
------------------------------------------------------------------
For more https://openwrt.org/docs/guide-user/additional-software/opkg-to-apk-cheatsheet
root@OpenWrt:~# cd /selftests/drivers/net/dsa/
root@OpenWrt:/selftests/drivers/net/dsa# ./local_termination.sh lan1 lan2 lan3 lan4
[ 149.240000] gswip 1e108000.switch lan1: configuring for phy/internal link mode
[ 149.270000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 151.370000] gswip 1e108000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 152.410000] gswip 1e108000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 157.820000] gswip 1e108000.switch lan2: entered promiscuous mode
[ 158.280000] gswip 1e108000.switch lan1: Link is Down
[ 158.300000] gswip 1e108000.switch lan1: configuring for phy/internal link mode
[ 158.590000] gswip 1e108000.switch lan2: left promiscuous mode
[ 158.600000] gswip 1e108000.switch lan2: Link is Down
[ 158.620000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 158.830000] gswip 1e108000.switch lan2: entered promiscuous mode
[ 161.440000] gswip 1e108000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 161.760000] gswip 1e108000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 181.320000] gswip 1e108000.switch lan2: entered allmulticast mode
[ 181.320000] lantiq,xrx200-net 1e10b308.eth eth0: entered allmulticast mode
[ 186.930000] gswip 1e108000.switch lan2: left allmulticast mode
[ 186.940000] lantiq,xrx200-net 1e10b308.eth eth0: left allmulticast mode
TEST: lan2: Unicast IPv4 to primary MAC address [ OK ]
TEST: lan2: Unicast IPv4 to macvlan MAC address [ OK ]
TEST: lan2: Unicast IPv4 to unknown MAC address [ OK ]
TEST: lan2: Unicast IPv4 to unknown MAC address, promisc [ OK ]
TEST: lan2: Unicast IPv4 to unknown MAC address, allmulti [ OK ]
TEST: lan2: Multicast IPv4 to joined group [ OK ]
TEST: lan2: Multicast IPv4 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: lan2: Multicast IPv4 to unknown group, promisc [ OK ]
TEST: lan2: Multicast IPv4 to unknown group, allmulti [ OK ]
TEST: lan2: Multicast IPv6 to joined group [ OK ]
TEST: lan2: Multicast IPv6 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: lan2: Multicast IPv6 to unknown group, promisc [ OK ]
TEST: lan2: Multicast IPv6 to unknown group, allmulti [ OK ]
TEST: lan2: 1588v2 over L2 transport, Sync [ OK ]
TEST: lan2: 1588v2 over L2 transport, Follow-Up [ OK ]
TEST: lan2: 1588v2 over L2 transport, Peer Delay Request [ OK ]
TEST: lan2: 1588v2 over IPv4, Sync [ OK ]
TEST: lan2: 1588v2 over IPv4, Follow-Up [ OK ]
TEST: lan2: 1588v2 over IPv4, Peer Delay Request [ OK ]
TEST: lan2: 1588v2 over IPv6, Sync [ OK ]
TEST: lan2: 1588v2 over IPv6, Follow-Up [ OK ]
TEST: lan2: 1588v2 over IPv6, Peer Delay Request [ OK ]
[ 198.700000] gswip 1e108000.switch lan2: left promiscuous mode
[ 198.730000] gswip 1e108000.switch lan2: Link is Down
[ 198.960000] gswip 1e108000.switch lan1: Link is Down
[ 199.580000] gswip 1e108000.switch lan1: configuring for phy/internal link mode
[ 199.770000] br0: port 1(lan2) entered blocking state
[ 199.780000] br0: port 1(lan2) entered disabled state
[ 199.780000] gswip 1e108000.switch lan2: entered allmulticast mode
[ 199.790000] lantiq,xrx200-net 1e10b308.eth eth0: entered allmulticast mode
[ 199.820000] gswip 1e108000.switch lan2: entered promiscuous mode
[ 199.830000] gswip 1e108000.switch: port 2 failed to add 00:00:de:ad:be:ee vid 1 to fdb: -22
[ 199.840000] gswip 1e108000.switch: port 2 failed to add 00:00:de:ad:be:ee vid 0 to fdb: -22
[ 199.850000] gswip 1e108000.switch: port 2 failed to add 00:01:02:03:04:02 vid 0 to fdb: -22
[ 199.880000] gswip 1e108000.switch: port 2 failed to add 00:01:02:03:04:02 vid 1 to fdb: -22
[ 199.910000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 200.330000] br0: entered promiscuous mode
[ 202.730000] gswip 1e108000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 203.130000] gswip 1e108000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 203.130000] br0: port 1(lan2) entered blocking state
[ 203.140000] br0: port 1(lan2) entered forwarding state
[ 222.360000] br0: entered allmulticast mode
[ 227.960000] br0: left allmulticast mode
TEST: vlan_filtering=0 bridge: Unicast IPv4 to primary MAC address [ OK ]
TEST: vlan_filtering=0 bridge: Unicast IPv4 to macvlan MAC address [ OK ]
TEST: vlan_filtering=0 bridge: Unicast IPv4 to unknown MAC address [ OK ]
TEST: vlan_filtering=0 bridge: Unicast IPv4 to unknown MAC address, promisc [ OK ]
TEST: vlan_filtering=0 bridge: Unicast IPv4 to unknown MAC address, allmulti [ OK ]
TEST: vlan_filtering=0 bridge: Multicast IPv4 to joined group [ OK ]
TEST: vlan_filtering=0 bridge: Multicast IPv4 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: vlan_filtering=0 bridge: Multicast IPv4 to unknown group, promisc [ OK ]
TEST: vlan_filtering=0 bridge: Multicast IPv4 to unknown group, allmulti [ OK ]
TEST: vlan_filtering=0 bridge: Multicast IPv6 to joined group [ OK ]
TEST: vlan_filtering=0 bridge: Multicast IPv6 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: vlan_filtering=0 bridge: Multicast IPv6 to unknown group, promisc [ OK ]
TEST: vlan_filtering=0 bridge: Multicast IPv6 to unknown group, allmulti [ OK ]
[ 231.700000] br0: left promiscuous mode
[ 231.890000] br0: port 1(lan2) entered disabled state
[ 232.200000] gswip 1e108000.switch lan2: left allmulticast mode
[ 232.200000] lantiq,xrx200-net 1e10b308.eth eth0: left allmulticast mode
[ 232.210000] gswip 1e108000.switch lan2: left promiscuous mode
[ 232.210000] br0: port 1(lan2) entered disabled state
[ 232.220000] gswip 1e108000.switch: port 2 failed to delete 00:01:02:03:04:02 vid 1 from fdb: -2
[ 232.230000] gswip 1e108000.switch: port 2 failed to delete 00:01:02:03:04:02 vid 0 from fdb: -2
[ 232.240000] gswip 1e108000.switch: port 2 failed to delete 00:00:de:ad:be:ee vid 1 from fdb: -2
[ 232.240000] gswip 1e108000.switch: port 2 failed to delete 00:00:de:ad:be:ee vid 0 from fdb: -2
[ 232.440000] gswip 1e108000.switch lan1: Link is Down
[ 232.990000] gswip 1e108000.switch lan1: configuring for phy/internal link mode
[ 233.170000] br0: port 1(lan2) entered blocking state
[ 233.180000] br0: port 1(lan2) entered disabled state
[ 233.180000] gswip 1e108000.switch lan2: entered allmulticast mode
[ 233.190000] lantiq,xrx200-net 1e10b308.eth eth0: entered allmulticast mode
[ 233.200000] gswip 1e108000.switch lan2: entered promiscuous mode
[ 233.210000] br0: port 1(lan2) entered blocking state
[ 233.210000] br0: port 1(lan2) entered forwarding state
[ 233.230000] gswip 1e108000.switch: port 2 failed to add 00:00:de:ad:be:ee vid 1 to fdb: -22
[ 233.250000] gswip 1e108000.switch: port 2 failed to add 00:00:de:ad:be:ee vid 0 to fdb: -22
[ 233.250000] gswip 1e108000.switch: port 2 failed to add 00:01:02:03:04:02 vid 0 to fdb: -22
[ 233.270000] gswip 1e108000.switch: port 2 failed to add 00:01:02:03:04:02 vid 1 to fdb: -22
[ 233.300000] gswip 1e108000.switch lan2: Link is Down
[ 233.300000] br0: port 1(lan2) entered disabled state
[ 233.750000] br0: entered promiscuous mode
[ 235.360000] gswip 1e108000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 235.360000] br0: port 1(lan2) entered blocking state
[ 235.370000] br0: port 1(lan2) entered forwarding state
[ 236.160000] gswip 1e108000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 255.280000] br0: entered allmulticast mode
[ 260.870000] br0: left allmulticast mode
TEST: vlan_filtering=1 bridge: Unicast IPv4 to primary MAC address [ OK ]
TEST: vlan_filtering=1 bridge: Unicast IPv4 to macvlan MAC address [ OK ]
TEST: vlan_filtering=1 bridge: Unicast IPv4 to unknown MAC address [ OK ]
TEST: vlan_filtering=1 bridge: Unicast IPv4 to unknown MAC address, promisc [ OK ]
TEST: vlan_filtering=1 bridge: Unicast IPv4 to unknown MAC address, allmulti [ OK ]
TEST: vlan_filtering=1 bridge: Multicast IPv4 to joined group [ OK ]
TEST: vlan_filtering=1 bridge: Multicast IPv4 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: vlan_filtering=1 bridge: Multicast IPv4 to unknown group, promisc [ OK ]
TEST: vlan_filtering=1 bridge: Multicast IPv4 to unknown group, allmulti [ OK ]
TEST: vlan_filtering=1 bridge: Multicast IPv6 to joined group [ OK ]
TEST: vlan_filtering=1 bridge: Multicast IPv6 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: vlan_filtering=1 bridge: Multicast IPv6 to unknown group, promisc [ OK ]
TEST: vlan_filtering=1 bridge: Multicast IPv6 to unknown group, allmulti [ OK ]
[ 264.710000] br0: left promiscuous mode
[ 264.890000] br0: port 1(lan2) entered disabled state
[ 265.160000] gswip 1e108000.switch lan2: left allmulticast mode
[ 265.170000] lantiq,xrx200-net 1e10b308.eth eth0: left allmulticast mode
[ 265.170000] gswip 1e108000.switch lan2: left promiscuous mode
[ 265.180000] br0: port 1(lan2) entered disabled state
[ 265.190000] gswip 1e108000.switch: port 2 failed to delete 00:01:02:03:04:02 vid 1 from fdb: -2
[ 265.190000] gswip 1e108000.switch: port 2 failed to delete 00:01:02:03:04:02 vid 0 from fdb: -2
[ 265.200000] gswip 1e108000.switch: port 2 failed to delete 00:00:de:ad:be:ee vid 1 from fdb: -2
[ 265.210000] gswip 1e108000.switch: port 2 failed to delete 00:00:de:ad:be:ee vid 0 from fdb: -2
[ 265.390000] gswip 1e108000.switch lan1: Link is Down
[ 265.530000] gswip 1e108000.switch lan2: Link is Down
[ 265.950000] gswip 1e108000.switch lan2: entered promiscuous mode
[ 266.470000] gswip 1e108000.switch lan1: configuring for phy/internal link mode
[ 266.920000] gswip 1e108000.switch lan2: left promiscuous mode
[ 266.930000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 267.340000] gswip 1e108000.switch lan2: entered promiscuous mode
[ 269.040000] gswip 1e108000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 269.600000] gswip 1e108000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 284.710000] lan2.100: entered promiscuous mode
[ 290.290000] lan2.100: left promiscuous mode
[ 293.250000] lan2.100: entered allmulticast mode
[ 293.250000] gswip 1e108000.switch lan2: entered allmulticast mode
[ 293.250000] lantiq,xrx200-net 1e10b308.eth eth0: entered allmulticast mode
[ 298.870000] lan2.100: left allmulticast mode
[ 298.870000] gswip 1e108000.switch lan2: left allmulticast mode
[ 298.870000] lantiq,xrx200-net 1e10b308.eth eth0: left allmulticast mode
TEST: VLAN upper: Unicast IPv4 to primary MAC address [FAIL]
reception failed
TEST: VLAN upper: Unicast IPv4 to macvlan MAC address [FAIL]
reception failed
TEST: VLAN upper: Unicast IPv4 to unknown MAC address [FAIL]
reception failed
TEST: VLAN upper: Unicast IPv4 to unknown MAC address, promisc [FAIL]
reception failed
TEST: VLAN upper: Unicast IPv4 to unknown MAC address, allmulti [FAIL]
reception failed
TEST: VLAN upper: Multicast IPv4 to joined group [FAIL]
reception failed
TEST: VLAN upper: Multicast IPv4 to unknown group [ OK ]
TEST: VLAN upper: Multicast IPv4 to unknown group, promisc [FAIL]
reception failed
TEST: VLAN upper: Multicast IPv4 to unknown group, allmulti [FAIL]
reception failed
TEST: VLAN upper: Multicast IPv6 to joined group [FAIL]
reception failed
TEST: VLAN upper: Multicast IPv6 to unknown group [ OK ]
TEST: VLAN upper: Multicast IPv6 to unknown group, promisc [FAIL]
reception failed
TEST: VLAN upper: Multicast IPv6 to unknown group, allmulti [FAIL]
reception failed
TEST: VLAN upper: 1588v2 over L2 transport, Sync [FAIL]
reception failed
TEST: VLAN upper: 1588v2 over L2 transport, Follow-Up [FAIL]
reception failed
TEST: VLAN upper: 1588v2 over L2 transport, Peer Delay Request [FAIL]
reception failed
TEST: VLAN upper: 1588v2 over IPv4, Sync [FAIL]
reception failed
TEST: VLAN upper: 1588v2 over IPv4, Follow-Up [FAIL]
reception failed
TEST: VLAN upper: 1588v2 over IPv4, Peer Delay Request [FAIL]
reception failed
TEST: VLAN upper: 1588v2 over IPv6, Sync [FAIL]
reception failed
TEST: VLAN upper: 1588v2 over IPv6, Follow-Up [FAIL]
reception failed
TEST: VLAN upper: 1588v2 over IPv6, Peer Delay Request [FAIL]
reception failed
[ 309.610000] gswip 1e108000.switch lan2: left promiscuous mode
[ 309.730000] gswip 1e108000.switch lan2: Link is Down
[ 310.080000] gswip 1e108000.switch lan1: Link is Down
[ 310.520000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 310.650000] gswip 1e108000.switch lan2: entered promiscuous mode
[ 311.200000] gswip 1e108000.switch lan1: configuring for phy/internal link mode
[ 311.650000] gswip 1e108000.switch lan2: left promiscuous mode
[ 311.670000] gswip 1e108000.switch lan2: entered promiscuous mode
[ 311.680000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 312.130000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 312.130000] br0: port 1(lan2) entered blocking state
[ 312.140000] br0: port 1(lan2) entered disabled state
[ 312.140000] gswip 1e108000.switch lan2: entered allmulticast mode
[ 312.150000] lantiq,xrx200-net 1e10b308.eth eth0: entered allmulticast mode
[ 312.180000] gswip 1e108000.switch: port 2 failed to add 00:00:de:ad:be:ee vid 1 to fdb: -22
[ 312.210000] gswip 1e108000.switch: port 2 failed to add 00:00:de:ad:be:ee vid 0 to fdb: -22
[ 312.210000] gswip 1e108000.switch: port 2 failed to add 00:01:02:03:04:02 vid 0 to fdb: -22
[ 312.240000] gswip 1e108000.switch: port 2 failed to add 00:01:02:03:04:02 vid 1 to fdb: -22
[ 314.330000] gswip 1e108000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 315.290000] gswip 1e108000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 315.290000] br0: port 1(lan2) entered blocking state
[ 315.300000] br0: port 1(lan2) entered forwarding state
[ 326.280000] lan2.100: entered promiscuous mode
[ 331.880000] lan2.100: left promiscuous mode
[ 334.860000] lan2.100: entered allmulticast mode
[ 340.450000] lan2.100: left allmulticast mode
TEST: VLAN over vlan_filtering=0 bridged port: Unicast IPv4 to primary MAC address [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Unicast IPv4 to macvlan MAC address [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Unicast IPv4 to unknown MAC address [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Unicast IPv4 to unknown MAC address, promisc [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Unicast IPv4 to unknown MAC address, allmulti [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv4 to joined group [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv4 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv4 to unknown group, promisc [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv4 to unknown group, allmulti [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv6 to joined group [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv6 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv6 to unknown group, promisc [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv6 to unknown group, allmulti [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over L2 transport, Sync [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over L2 transport, Follow-Up [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over L2 transport, Peer Delay Request [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over IPv4, Sync [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over IPv4, Follow-Up [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over IPv4, Peer Delay Request [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over IPv6, Sync [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over IPv6, Follow-Up [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over IPv6, Peer Delay Request [ OK ]
[ 351.740000] gswip 1e108000.switch lan2: left allmulticast mode
[ 351.740000] lantiq,xrx200-net 1e10b308.eth eth0: left allmulticast mode
[ 351.750000] br0: port 1(lan2) entered disabled state
[ 351.760000] gswip 1e108000.switch: port 2 failed to delete 00:01:02:03:04:02 vid 1 from fdb: -2
[ 351.770000] gswip 1e108000.switch: port 2 failed to delete 00:01:02:03:04:02 vid 0 from fdb: -2
[ 351.780000] gswip 1e108000.switch: port 2 failed to delete 00:00:de:ad:be:ee vid 1 from fdb: -2
[ 351.790000] gswip 1e108000.switch: port 2 failed to delete 00:00:de:ad:be:ee vid 0 from fdb: -2
[ 352.030000] gswip 1e108000.switch lan2: Link is Down
[ 352.400000] gswip 1e108000.switch lan1: Link is Down
[ 352.850000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 353.510000] gswip 1e108000.switch lan1: configuring for phy/internal link mode
[ 354.010000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 354.390000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 354.390000] br0: port 1(lan2) entered blocking state
[ 354.400000] br0: port 1(lan2) entered disabled state
[ 354.400000] gswip 1e108000.switch lan2: entered allmulticast mode
[ 354.410000] lantiq,xrx200-net 1e10b308.eth eth0: entered allmulticast mode
[ 354.420000] gswip 1e108000.switch: port 2 failed to add 00:00:de:ad:be:ee vid 1 to fdb: -22
[ 354.430000] gswip 1e108000.switch: port 2 failed to add 00:00:de:ad:be:ee vid 0 to fdb: -22
[ 354.450000] gswip 1e108000.switch: port 2 failed to add 00:01:02:03:04:02 vid 0 to fdb: -22
[ 354.450000] gswip 1e108000.switch: port 2 failed to add 00:01:02:03:04:02 vid 1 to fdb: -22
[ 356.640000] gswip 1e108000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 357.530000] gswip 1e108000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 357.530000] br0: port 1(lan2) entered blocking state
[ 357.540000] br0: port 1(lan2) entered forwarding state
[ 368.030000] lan2.100: entered promiscuous mode
[ 373.680000] lan2.100: left promiscuous mode
[ 376.660000] lan2.100: entered allmulticast mode
[ 382.240000] lan2.100: left allmulticast mode
TEST: VLAN over vlan_filtering=1 bridged port: Unicast IPv4 to primary MAC address [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Unicast IPv4 to macvlan MAC address [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Unicast IPv4 to unknown MAC address [FAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=1 bridged port: Unicast IPv4 to unknown MAC address, promisc [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Unicast IPv4 to unknown MAC address, allmulti [FAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv4 to joined group [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv4 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv4 to unknown group, promisc [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv4 to unknown group, allmulti [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv6 to joined group [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv6 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv6 to unknown group, promisc [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv6 to unknown group, allmulti [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over L2 transport, Sync [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over L2 transport, Follow-Up [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over L2 transport, Peer Delay Request [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over IPv4, Sync [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over IPv4, Follow-Up [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over IPv4, Peer Delay Request [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over IPv6, Sync [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over IPv6, Follow-Up [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over IPv6, Peer Delay Request [ OK ]
[ 394.100000] gswip 1e108000.switch lan2: left allmulticast mode
[ 394.100000] lantiq,xrx200-net 1e10b308.eth eth0: left allmulticast mode
[ 394.110000] br0: port 1(lan2) entered disabled state
[ 394.120000] gswip 1e108000.switch: port 2 failed to delete 00:01:02:03:04:02 vid 1 from fdb: -2
[ 394.120000] gswip 1e108000.switch: port 2 failed to delete 00:01:02:03:04:02 vid 0 from fdb: -2
[ 394.140000] gswip 1e108000.switch: port 2 failed to delete 00:00:de:ad:be:ee vid 1 from fdb: -2
[ 394.140000] gswip 1e108000.switch: port 2 failed to delete 00:00:de:ad:be:ee vid 0 from fdb: -2
[ 394.150000] gswip 1e108000.switch: bridge to leave does not exists
[ 394.160000] gswip 1e108000.switch: port 2 failed to reset VLAN filtering to 0: -ENOENT
[ 394.290000] gswip 1e108000.switch: bridge to leave does not exists
[ 394.290000] gswip 1e108000.switch lan2: failed to kill vid 8100/100
[ 394.430000] gswip 1e108000.switch lan2: Link is Down
[ 394.810000] gswip 1e108000.switch lan1: Link is Down
[ 395.390000] gswip 1e108000.switch lan1: configuring for phy/internal link mode
[ 395.780000] br0: port 1(lan2) entered blocking state
[ 395.780000] br0: port 1(lan2) entered disabled state
[ 395.780000] gswip 1e108000.switch lan2: entered allmulticast mode
[ 395.790000] lantiq,xrx200-net 1e10b308.eth eth0: entered allmulticast mode
[ 395.820000] gswip 1e108000.switch: port 2 failed to add 00:00:de:ad:be:ee vid 1 to fdb: -22
[ 395.820000] gswip 1e108000.switch: port 2 failed to add 00:00:de:ad:be:ee vid 0 to fdb: -22
[ 395.840000] gswip 1e108000.switch: port 2 failed to add 00:01:02:03:04:02 vid 0 to fdb: -22
[ 395.840000] gswip 1e108000.switch: port 2 failed to add 00:01:02:03:04:02 vid 1 to fdb: -22
[ 395.910000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 396.520000] br0: entered promiscuous mode
[ 398.010000] gswip 1e108000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 398.010000] br0: port 1(lan2) entered blocking state
[ 398.020000] br0: port 1(lan2) entered forwarding state
[ 398.560000] gswip 1e108000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 409.260000] br0.100: entered promiscuous mode
[ 414.880000] br0.100: left promiscuous mode
[ 417.870000] br0.100: entered allmulticast mode
[ 417.870000] br0: entered allmulticast mode
[ 423.500000] br0.100: left allmulticast mode
[ 423.500000] br0: left allmulticast mode
TEST: VLAN over vlan_filtering=0 bridge: Unicast IPv4 to primary MAC address [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Unicast IPv4 to macvlan MAC address [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Unicast IPv4 to unknown MAC address [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Unicast IPv4 to unknown MAC address, promisc [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Unicast IPv4 to unknown MAC address, allmulti [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv4 to joined group [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv4 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv4 to unknown group, promisc [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv4 to unknown group, allmulti [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv6 to joined group [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv6 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv6 to unknown group, promisc [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv6 to unknown group, allmulti [ OK ]
[ 427.270000] br0: left promiscuous mode
[ 427.510000] br0: port 1(lan2) entered disabled state
[ 427.750000] gswip 1e108000.switch lan2: left allmulticast mode
[ 427.750000] lantiq,xrx200-net 1e10b308.eth eth0: left allmulticast mode
[ 427.760000] br0: port 1(lan2) entered disabled state
[ 427.760000] gswip 1e108000.switch: port 2 failed to delete 00:01:02:03:04:02 vid 1 from fdb: -2
[ 427.770000] gswip 1e108000.switch: port 2 failed to delete 00:01:02:03:04:02 vid 0 from fdb: -2
[ 427.780000] gswip 1e108000.switch: port 2 failed to delete 00:00:de:ad:be:ee vid 1 from fdb: -2
[ 427.790000] gswip 1e108000.switch: port 2 failed to delete 00:00:de:ad:be:ee vid 0 from fdb: -2
[ 428.040000] gswip 1e108000.switch lan1: Link is Down
[ 428.160000] gswip 1e108000.switch lan2: Link is Down
[ 428.600000] gswip 1e108000.switch lan1: configuring for phy/internal link mode
[ 428.970000] br0: port 1(lan2) entered blocking state
[ 428.980000] br0: port 1(lan2) entered disabled state
[ 428.980000] gswip 1e108000.switch lan2: entered allmulticast mode
[ 428.990000] lantiq,xrx200-net 1e10b308.eth eth0: entered allmulticast mode
[ 429.010000] gswip 1e108000.switch: port 2 failed to add 00:00:de:ad:be:ee vid 1 to fdb: -22
[ 429.020000] gswip 1e108000.switch: port 2 failed to add 00:00:de:ad:be:ee vid 0 to fdb: -22
[ 429.050000] gswip 1e108000.switch: port 2 failed to add 00:01:02:03:04:02 vid 0 to fdb: -22
[ 429.050000] gswip 1e108000.switch: port 2 failed to add 00:01:02:03:04:02 vid 1 to fdb: -22
[ 429.700000] br0: entered promiscuous mode
[ 429.820000] gswip 1e108000.switch: port 2 failed to add 00:01:02:03:04:02 vid 100 to fdb: -22
[ 429.880000] gswip 1e108000.switch: port 2 failed to add 00:00:de:ad:be:ee vid 100 to fdb: -22
[ 431.280000] gswip 1e108000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 431.290000] br0: port 1(lan2) entered blocking state
[ 431.290000] br0: port 1(lan2) entered forwarding state
[ 431.760000] gswip 1e108000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 442.290000] br0.100: entered promiscuous mode
[ 447.910000] br0.100: left promiscuous mode
[ 450.900000] br0.100: entered allmulticast mode
[ 450.900000] br0: entered allmulticast mode
[ 456.500000] br0.100: left allmulticast mode
[ 456.500000] br0: left allmulticast mode
TEST: VLAN over vlan_filtering=1 bridge: Unicast IPv4 to primary MAC address [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Unicast IPv4 to macvlan MAC address [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Unicast IPv4 to unknown MAC address [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Unicast IPv4 to unknown MAC address, promisc [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Unicast IPv4 to unknown MAC address, allmulti [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv4 to joined group [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv4 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv4 to unknown group, promisc [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv4 to unknown group, allmulti [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv6 to joined group [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv6 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv6 to unknown group, promisc [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv6 to unknown group, allmulti [ OK ]
[ 460.360000] gswip 1e108000.switch: port 2 failed to delete 00:00:de:ad:be:ee vid 100 from fdb: -2
[ 460.390000] gswip 1e108000.switch: port 2 failed to delete 00:01:02:03:04:02 vid 100 from fdb: -2
[ 460.420000] br0: left promiscuous mode
[ 460.640000] br0: port 1(lan2) entered disabled state
[ 460.930000] gswip 1e108000.switch lan2: left allmulticast mode
[ 460.940000] lantiq,xrx200-net 1e10b308.eth eth0: left allmulticast mode
[ 460.940000] br0: port 1(lan2) entered disabled state
[ 460.950000] gswip 1e108000.switch: port 2 failed to delete 00:01:02:03:04:02 vid 1 from fdb: -2
[ 460.960000] gswip 1e108000.switch: port 2 failed to delete 00:01:02:03:04:02 vid 0 from fdb: -2
[ 460.970000] gswip 1e108000.switch: port 2 failed to delete 00:00:de:ad:be:ee vid 1 from fdb: -2
[ 460.970000] gswip 1e108000.switch: port 2 failed to delete 00:00:de:ad:be:ee vid 0 from fdb: -2
[ 461.240000] gswip 1e108000.switch lan1: Link is Down
[ 461.440000] gswip 1e108000.switch lan2: Link is Down
root@OpenWrt:/selftests/drivers/net/dsa#
[-- Attachment #3: after.txt --]
[-- Type: text/plain, Size: 42960 bytes --]
(AVM) EVA Revision: 1.1964 Version: 2964
(C) Copyright 2005 AVM Date: Nov 27 2013 Time: 14:33:10 (0) 3 0x0-0x740D
[FLASH:] MACRONIX Uniform-Flash 1MB 256 Bytes WriteBuffer
[FLASH:](Eraseregion [0] 16 sectors a 64kB)
[NAND:] 512MB MICRON 2048 Pagesize 128k Blocksize 4096 Blocks 8Bit 1 CS HW
[SYSTEM:] VR9 on 500MHz/250MHz/250MHz
.Atheros 8030/35 detected
Eva_AVM >##..................................................................
[ 0.000000] Linux version 6.17.0-rc5+ (daniel@mixxxtop) (mips-openwrt-linux-gnu-gcc (OpenWrt GCC 14.3.0 r30716+1-56b083221f) 14.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Thu Sep 4 23:19:13 2025
[ 0.000000] SoC: xRX200 rev 1.2
[ 0.000000] printk: legacy bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019556 (MIPS 34Kc)
[ 0.000000] MIPS: machine is AVM FRITZ!Box 7490 (Micron NAND)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT
[ 0.000000] Detected 1 available secondary CPU(s)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] percpu: Embedded 12 pages/cpu s18224 r8192 d22736 u49152
[ 0.000000] Kernel command line: console=ttyLTQ0,115200
[ 0.000000] printk: log buffer data + meta data: 131072 + 409600 = 540672 bytes
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[ 0.000000] Writing ErrCtl register=00042000
[ 0.000000] Readback ErrCtl register=00042000
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 65536
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.
[ 0.000000] NR_IRQS: 256
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] CPU Clock: 500MHz
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041786 ns
[ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 21474836475000000ns
[ 0.010000] Calibrating delay loop... 331.77 BogoMIPS (lpj=1658880)
[ 0.070000] pid_max: default: 32768 minimum: 301
[ 0.090000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.100000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.130000] rcu: Hierarchical SRCU implementation.
[ 0.140000] rcu: Max phase no-delay instances is 1000.
[ 0.140000] smp: Bringing up secondary CPUs ...
[ 0.150000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.150000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.150000] CPU1 revision is: 00019556 (MIPS 34Kc)
[ 0.200000] Counter synchronization [CPU#0 -> CPU#1]: passed
[ 0.210000] smp: Brought up 1 node, 2 CPUs
[ 0.210000] Memory: 246400K/262144K available (8707K kernel code, 638K rwdata, 1068K rodata, 1284K init, 219K bss, 14608K reserved, 0K cma-reserved)
[ 0.230000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.240000] posixtimers hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.240000] futex hash table entries: 512 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear).
[ 0.260000] pinctrl core: initialized pinctrl subsystem
[ 0.270000] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.280000] dcdc-xrx200 1f106a00.dcdc: Core Voltage : 1016 mV
[ 0.290000] /fpi@10000000/pinmux@e100b10: Fixed dependency cycle(s) with /fpi@10000000/pinmux@e100b10/pinmux
[ 0.300000] pinctrl-xway 1e100b10.pinmux: Init done
[ 0.310000] dma-xway 1e104100.dma: Init done - hw rev: 7, ports: 7, channels: 28
[ 0.330000] usbcore: registered new interface driver usbfs
[ 0.340000] usbcore: registered new interface driver hub
[ 0.340000] usbcore: registered new device driver usb
[ 0.350000] clocksource: Switched to clocksource MIPS
[ 0.370000] NET: Registered PF_INET protocol family
[ 0.370000] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.380000] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 0.390000] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.400000] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.410000] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.410000] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.420000] MPTCP token hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.430000] UDP hash table entries: 256 (order: 1, 14336 bytes, linear)
[ 0.440000] UDP-Lite hash table entries: 256 (order: 1, 14336 bytes, linear)
[ 0.440000] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.450000] PCI: CLS 0 bytes, default 32
[ 0.450000] gptu: totally 6 16-bit timers/counters
[ 0.460000] gptu: misc_register on minor 256
[ 0.460000] gptu: succeeded to request irq 126
[ 0.470000] gptu: succeeded to request irq 127
[ 0.470000] gptu: succeeded to request irq 128
[ 0.480000] gptu: succeeded to request irq 129
[ 0.480000] gptu: succeeded to request irq 130
[ 0.490000] gptu: succeeded to request irq 131
[ 0.490000] No VPEs reserved for AP/SP, not initialize VPE loader
[ 0.490000] Pass maxvpes=<n> argument as kernel argument
[ 0.500000] No TCs reserved for AP/SP, not initializing RTLX.
[ 0.500000] Pass maxtcs=<n> argument as kernel argument
[ 0.520000] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[ 0.530000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.540000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.560000] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc
[ 0.570000] printk: legacy console [ttyLTQ0] enabled
[ 0.570000] printk: legacy console [ttyLTQ0] enabled
[ 0.580000] printk: legacy bootconsole [early0] disabled
[ 0.580000] printk: legacy bootconsole [early0] disabled
[ 0.600000] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xdc
[ 0.600000] nand: Micron MT29F4G08ABADAWP
[ 0.600000] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 0.610000] Scanning device for bad blocks
[ 0.670000] Bad eraseblock 660 at 0x000005280000
[ 0.670000] Bad eraseblock 692 at 0x000005680000
[ 0.910000] 2 fixed-partitions partitions found on MTD device 14000000.nand
[ 0.920000] Creating 2 MTD partitions on "14000000.nand":
[ 0.920000] 0x000000000000-0x000000400000 : "kernel"
[ 0.930000] 0x000000400000-0x000020000000 : "ubi"
[ 0.950000] spi-lantiq-ssc 1e100800.spi: Lantiq SSC SPI controller (Rev 8, TXFS 8, RXFS 8, DMA 1)
[ 0.960000] spi-nor spi0.4: supply vcc not found, using dummy regulator
[ 0.970000] 3 fixed-partitions partitions found on MTD device spi0.4
[ 0.970000] Creating 3 MTD partitions on "spi0.4":
[ 0.980000] 0x000000000000-0x000000040000 : "urlader"
[ 0.980000] 0x000000040000-0x0000000a0000 : "tffs (1)"
[ 0.990000] 0x0000000a0000-0x000000100000 : "tffs (2)"
[ 1.010000] NET: Registered PF_INET6 protocol family
[ 1.030000] Segment Routing with IPv6
[ 1.030000] In-situ OAM (IOAM) with IPv6
[ 1.040000] NET: Registered PF_PACKET protocol family
[ 1.040000] 8021q: 802.1Q VLAN Support v1.8
[ 1.110000] pcie-xrx200 1d900000.pcie: switch pcie endianess requested
[ 1.260000] PCI host bridge to bus 0000:00
[ 1.260000] pci_bus 0000:00: root bus resource [mem 0x1c000000-0x1cffffff]
[ 1.270000] pci_bus 0000:00: root bus resource [io 0x1d800000-0x1d8fffff]
[ 1.270000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 1.280000] ifx_pcie_rc_class_early_fixup: fixed pcie host bridge to pci-pci bridge
[ 1.300000] pci 0000:00:00.0: 0x80848e10 took 17155 usecs
[ 1.300000] pci 0000:00:00.0: [1bef:0011] type 01 class 0x060400 PCIe Root Port
[ 1.310000] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 1.310000] pci 0000:00:00.0: bridge window [io 0x1d800000-0x1d8fffff]
[ 1.320000] pci 0000:00:00.0: bridge window [mem 0x1c000000-0x1cffffff]
[ 1.330000] pci 0000:00:00.0: bridge window [mem 0x1c000000-0x1cffffff pref]
[ 1.340000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 1.340000] pci 0000:01:00.0: [1912:0015] type 00 class 0x0c0330 PCIe Endpoint
[ 1.350000] pci 0000:01:00.0: BAR 0 [mem 0x00000000-0x00001fff 64bit]
[ 1.360000] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 1.360000] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
[ 1.380000] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 1.380000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
[ 1.390000] pci 0000:00:00.0: bridge window [mem 0x1c000000-0x1c0fffff]: assigned
[ 1.400000] pci 0000:01:00.0: BAR 0 [mem 0x1c000000-0x1c001fff 64bit]: assigned
[ 1.400000] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.410000] pci 0000:00:00.0: bridge window [mem 0x1c000000-0x1c0fffff]
[ 1.420000] ifx_pcie_bios_map_irq port 0 dev 0000:00:00.0 slot 0 pin 1
[ 1.420000] ifx_pcie_bios_map_irq dev 0000:00:00.0 irq 144 assigned
[ 1.430000] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[ 1.440000] pci 0000:01:00.0: enabling device (0000 -> 0002)
[ 7.190000] pci 0000:01:00.0: xHCI HW not ready after 5 sec (HC bug?) status = 0x801
[ 7.190000] pci 0000:01:00.0: 0x805ad224 took 5623393 usecs
[ 7.200000] UBI: auto-attach mtd1
[ 7.200000] ubi0: attaching mtd1
[ 8.880000] ubi0: scanning is finished
[ 8.900000] ubi0: attached mtd1 (name "ubi", size 508 MiB)
[ 8.910000] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
[ 8.910000] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[ 8.920000] ubi0: VID header offset: 512 (aligned 512), data offset: 2048
[ 8.930000] ubi0: good PEBs: 4062, bad PEBs: 2, corrupted PEBs: 0
[ 8.930000] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 8.940000] ubi0: max/mean erase counter: 14/6, WL threshold: 4096, image sequence number: 699232088
[ 8.950000] ubi0: available PEBs: 0, total reserved PEBs: 4062, PEBs reserved for bad PEB handling: 78
[ 8.960000] ubi0: background thread "ubi_bgt0d" started, PID 308
[ 8.960000] block ubiblock0_0: created from ubi0:0(rootfs)
[ 8.970000] ubiblock: device ubiblock0_0 (rootfs) set to be root files[ 8.980000] check access for rdinit=/init failed: -2, ignoring
[ 8.990000] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 9.000000] Freeing unused kernel image (initmem) memory: 1284K
[ 9.000000] This architecture does not have kernel memory protection.
[ 9.010000] Run /sbin/init as init process
[ 10.410000] init: Console is alive
[ 10.410000] init: - watchdog -
[ 11.360000] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 11.630000] SCSI subsystem initialized
[ 11.660000] ifx_pcie_bios_map_irq port 0 dev 0000:01:00.0 slot 0 pin 1
[ 11.660000] ifx_pcie_bios_map_irq dev 0000:01:00.0 irq 144 assigned
[ 11.670000] ifx_pcie_bios_map_irq port 0 dev 0000:01:00.0 slot 0 pin 1
[ 11.680000] ifx_pcie_bios_map_irq dev 0000:01:00.0 irq 144 assigned
[ 12.120000] xhci-pci-renesas 0000:01:00.0: xHCI Host Controller
[ 12.120000] xhci-pci-renesas 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 12.140000] xhci-pci-renesas 0000:01:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x0000000100000090
[ 12.140000] xhci-pci-renesas 0000:01:00.0: xHCI Host Controller
[ 12.150000] xhci-pci-renesas 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 12.160000] xhci-pci-renesas 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 12.170000] hub 1-0:1.0: USB hub found
[ 12.170000] hub 1-0:1.0: 2 ports detected
[ 12.180000] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 12.190000] hub 2-0:1.0: USB hub found
[ 12.190000] hub 2-0:1.0: 2 ports detected
[ 12.210000] usbcore: registered new interface driver usb-storage
[ 12.210000] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 12.230000] init: - preinit -
[ 13.300000] usb 2-2: new SuperSpeed USB device number 2 using xhci-pci-renesas
[ 15.550000] random: crng init done
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 23.110000] UBIFS (ubi0:1): Mounting in unauthenticated mode
[ 23.130000] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 480
[ 23.250000] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 23.260000] UBIFS (ubi0:1): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 23.270000] UBIFS (ubi0:1): FS size: 452616192 bytes (431 MiB, 3508 LEBs), max 3523 LEBs, journal size 22708224 bytes (21 MiB, 176 LEBs)
[ 23.280000] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
[ 23.290000] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 73BD5097-CAE2-483C-BF22-9C84AB2132D1, small LPT model
[ 23.300000] mount_root: overlay filesystem has not been fully initialized yet
[ 23.310000] mount_root: switching to ubifs overlay
- config restore -
[ 24.320000] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 24.460000] procd: - early -
[ 24.460000] procd: - watchdog -
[ 25.290000] procd: - watchdog -
[ 25.290000] procd: - ubus -
[ 25.500000] procd: - init -
Please press Enter to activate this console.
[ 27.890000] kmodloader: loading kernel modules from /etc/modules.d/*
[ 30.110000] urngd: v1.0.2 started.
[ 30.210000] gswip 1e108000.switch: configuring for fixed/internal link mode
[ 30.210000] gswip 1e108000.switch: Link is Up - 1Gbps/Full - flow control off
[ 30.290000] gswip 1e108000.switch lan3 (uninitialized): PHY [1e108000.switch-mii:00] driver [Qualcomm Atheros AR8035] (irq=POLL)
[ 30.400000] gswip 1e108000.switch lan4 (uninitialized): PHY [1e108000.switch-mii:01] driver [Qualcomm Atheros AR8035] (irq=POLL)
[ 30.430000] gswip 1e108000.switch lan2 (uninitialized): PHY [1e108000.switch-mii:11] driver [Intel XWAY PHY11G (xRX v1.2 integrated)] (irq=POLL)
[ 30.460000] gswip 1e108000.switch lan1 (uninitialized): PHY [1e108000.switch-mii:13] driver [Intel XWAY PHY11G (xRX v1.2 integrated)] (irq=POLL)
[ 30.480000] lantiq,xrx200-net 1e10b308.eth eth0: entered promiscuous mode
[ 30.490000] DSA: tree 0 setup
[ 30.490000] gswip 1e108000.switch: probed GSWIP version 21 mod 0
[ 30.520000] GACT probability on
[ 30.540000] Mirror/redirect action on
[ 30.590000] u32 classifier
[ 30.590000] input device check on
[ 30.590000] Actions configured
[ 30.690000] mdio_netlink: loading out-of-tree module taints kernel.
[ 30.750000] usbcore: registered new device driver r8152-cfgselector
[ 30.940000] r8152-cfgselector 2-2: reset SuperSpeed USB device number 2 using xhci-pci-renesas
[ 31.280000] r8152 2-2:1.0 eth1: v1.12.13
[ 31.280000] usbcore: registered new interface driver r8152
[ 31.320000] usbcore: registered new interface driver rtl8150
[ 31.360000] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 43.870000] br-lan: port 1(eth1) entered blocking state
[ 43.870000] br-lan: port 1(eth1) entered disabled state
[ 43.880000] r8152 2-2:1.0 eth1: entered allmulticast mode
[ 43.890000] r8152 2-2:1.0 eth1: entered promiscuous mode
[ 43.910000] br-lan: port 1(eth1) entered blocking state
[ 43.910000] br-lan: port 1(eth1) entered forwarding state
[ 44.800000] br-lan: port 1(eth1) entered disabled state
[ 47.480000] r8152 2-2:1.0 eth1: Promiscuous mode enabled
[ 47.490000] r8152 2-2:1.0 eth1: carrier on
[ 47.500000] br-lan: port 1(eth1) entered blocking state
[ 47.500000] br-lan: port 1(eth1) entered forwarding state
BusyBox v1.37.0 (2025-09-04 23:19:13 UTC) built-in shell (ash)
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
OpenWrt SNAPSHOT, r30959+10-b4294bc980
-----------------------------------------------------
=== WARNING! =====================================
There is no root password defined on this device!
Use the "passwd" command to set up a new password
in order to prevent unauthorized SSH logins.
--------------------------------------------------
OpenWrt recently switched to the "apk" package manager!
OPKG Command APK Equivalent Description
------------------------------------------------------------------
opkg install <pkg> apk add <pkg> Install a package
opkg remove <pkg> apk del <pkg> Remove a package
opkg upgrade apk upgrade Upgrade all packages
opkg files <pkg> apk info -L <pkg> List package contents
opkg list-installed apk info List installed packages
opkg update apk update Update package lists
opkg search <pkg> apk search <pkg> Search for packages
------------------------------------------------------------------
For more https://openwrt.org/docs/guide-user/additional-software/opkg-to-apk-cheatsheet
root@OpenWrt:~# cd /selftests/drivers/net/dsa
root@OpenWrt:/selftests/drivers/net/dsa# ./local_termination.sh lan1 lan2 lan3 lan4
[ 79.760000] gswip 1e108000.switch lan1: configuring for phy/internal link mode
[ 79.800000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 81.930000] gswip 1e108000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 82.880000] gswip 1e108000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 88.350000] gswip 1e108000.switch lan2: entered promiscuous mode
[ 88.840000] gswip 1e108000.switch lan1: Link is Down
[ 88.850000] gswip 1e108000.switch lan1: configuring for phy/internal link mode
[ 89.180000] gswip 1e108000.switch lan2: left promiscuous mode
[ 89.180000] gswip 1e108000.switch lan2: Link is Down
[ 89.200000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 89.380000] gswip 1e108000.switch lan2: entered promiscuous mode
[ 92.000000] gswip 1e108000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 92.320000] gswip 1e108000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 111.950000] gswip 1e108000.switch lan2: entered allmulticast mode
[ 111.950000] lantiq,xrx200-net 1e10b308.eth eth0: entered allmulticast mode
[ 117.530000] gswip 1e108000.switch lan2: left allmulticast mode
[ 117.540000] lantiq,xrx200-net 1e10b308.eth eth0: left allmulticast mode
TEST: lan2: Unicast IPv4 to primary MAC address [ OK ]
TEST: lan2: Unicast IPv4 to macvlan MAC address [ OK ]
TEST: lan2: Unicast IPv4 to unknown MAC address [ OK ]
TEST: lan2: Unicast IPv4 to unknown MAC address, promisc [ OK ]
TEST: lan2: Unicast IPv4 to unknown MAC address, allmulti [ OK ]
TEST: lan2: Multicast IPv4 to joined group [ OK ]
TEST: lan2: Multicast IPv4 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: lan2: Multicast IPv4 to unknown group, promisc [ OK ]
TEST: lan2: Multicast IPv4 to unknown group, allmulti [ OK ]
TEST: lan2: Multicast IPv6 to joined group [ OK ]
TEST: lan2: Multicast IPv6 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: lan2: Multicast IPv6 to unknown group, promisc [ OK ]
TEST: lan2: Multicast IPv6 to unknown group, allmulti [ OK ]
TEST: lan2: 1588v2 over L2 transport, Sync [ OK ]
TEST: lan2: 1588v2 over L2 transport, Follow-Up [ OK ]
TEST: lan2: 1588v2 over L2 transport, Peer Delay Request [ OK ]
TEST: lan2: 1588v2 over IPv4, Sync [ OK ]
TEST: lan2: 1588v2 over IPv4, Follow-Up [ OK ]
TEST: lan2: 1588v2 over IPv4, Peer Delay Request [ OK ]
TEST: lan2: 1588v2 over IPv6, Sync [ OK ]
TEST: lan2: 1588v2 over IPv6, Follow-Up [ OK ]
TEST: lan2: 1588v2 over IPv6, Peer Delay Request [ OK ]
[ 129.120000] gswip 1e108000.switch lan2: left promiscuous mode
[ 129.150000] gswip 1e108000.switch lan2: Link is Down
[ 129.450000] gswip 1e108000.switch lan1: Link is Down
[ 129.990000] gswip 1e108000.switch lan1: configuring for phy/internal link mode
[ 130.200000] br0: port 1(lan2) entered blocking state
[ 130.200000] br0: port 1(lan2) entered disabled state
[ 130.210000] gswip 1e108000.switch lan2: entered allmulticast mode
[ 130.210000] lantiq,xrx200-net 1e10b308.eth eth0: entered allmulticast mode
[ 130.240000] gswip 1e108000.switch lan2: entered promiscuous mode
[ 130.330000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 130.740000] br0: entered promiscuous mode
[ 133.130000] gswip 1e108000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 133.450000] gswip 1e108000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 133.450000] br0: port 1(lan2) entered blocking state
[ 133.460000] br0: port 1(lan2) entered forwarding state
[ 152.670000] br0: entered allmulticast mode
[ 158.310000] br0: left allmulticast mode
TEST: vlan_filtering=0 bridge: Unicast IPv4 to primary MAC address [ OK ]
TEST: vlan_filtering=0 bridge: Unicast IPv4 to macvlan MAC address [ OK ]
TEST: vlan_filtering=0 bridge: Unicast IPv4 to unknown MAC address [ OK ]
TEST: vlan_filtering=0 bridge: Unicast IPv4 to unknown MAC address, promisc [ OK ]
TEST: vlan_filtering=0 bridge: Unicast IPv4 to unknown MAC address, allmulti [ OK ]
TEST: vlan_filtering=0 bridge: Multicast IPv4 to joined group [ OK ]
TEST: vlan_filtering=0 bridge: Multicast IPv4 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: vlan_filtering=0 bridge: Multicast IPv4 to unknown group, promisc [ OK ]
TEST: vlan_filtering=0 bridge: Multicast IPv4 to unknown group, allmulti [ OK ]
TEST: vlan_filtering=0 bridge: Multicast IPv6 to joined group [ OK ]
TEST: vlan_filtering=0 bridge: Multicast IPv6 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: vlan_filtering=0 bridge: Multicast IPv6 to unknown group, promisc [ OK ]
TEST: vlan_filtering=0 bridge: Multicast IPv6 to unknown group, allmulti [ OK ]
[ 162.080000] br0: left promiscuous mode
[ 162.230000] br0: port 1(lan2) entered disabled state
[ 162.480000] gswip 1e108000.switch lan2: left allmulticast mode
[ 162.480000] lantiq,xrx200-net 1e10b308.eth eth0: left allmulticast mode
[ 162.490000] gswip 1e108000.switch lan2: left promiscuous mode
[ 162.500000] br0: port 1(lan2) entered disabled state
[ 162.710000] gswip 1e108000.switch lan1: Link is Down
[ 163.270000] gswip 1e108000.switch lan1: configuring for phy/internal link mode
[ 163.470000] br0: port 1(lan2) entered blocking state
[ 163.470000] br0: port 1(lan2) entered disabled state
[ 163.480000] gswip 1e108000.switch lan2: entered allmulticast mode
[ 163.480000] lantiq,xrx200-net 1e10b308.eth eth0: entered allmulticast mode
[ 163.500000] gswip 1e108000.switch lan2: entered promiscuous mode
[ 163.510000] br0: port 1(lan2) entered blocking state
[ 163.510000] br0: port 1(lan2) entered forwarding state
[ 163.610000] gswip 1e108000.switch lan2: Link is Down
[ 163.610000] br0: port 1(lan2) entered disabled state
[ 164.040000] br0: entered promiscuous mode
[ 165.770000] gswip 1e108000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 165.770000] br0: port 1(lan2) entered blocking state
[ 165.780000] br0: port 1(lan2) entered forwarding state
[ 166.400000] gswip 1e108000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 185.600000] br0: entered allmulticast mode
[ 191.200000] br0: left allmulticast mode
TEST: vlan_filtering=1 bridge: Unicast IPv4 to primary MAC address [ OK ]
TEST: vlan_filtering=1 bridge: Unicast IPv4 to macvlan MAC address [ OK ]
TEST: vlan_filtering=1 bridge: Unicast IPv4 to unknown MAC address [ OK ]
TEST: vlan_filtering=1 bridge: Unicast IPv4 to unknown MAC address, promisc [ OK ]
TEST: vlan_filtering=1 bridge: Unicast IPv4 to unknown MAC address, allmulti [ OK ]
TEST: vlan_filtering=1 bridge: Multicast IPv4 to joined group [ OK ]
TEST: vlan_filtering=1 bridge: Multicast IPv4 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: vlan_filtering=1 bridge: Multicast IPv4 to unknown group, promisc [ OK ]
TEST: vlan_filtering=1 bridge: Multicast IPv4 to unknown group, allmulti [ OK ]
TEST: vlan_filtering=1 bridge: Multicast IPv6 to joined group [ OK ]
TEST: vlan_filtering=1 bridge: Multicast IPv6 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: vlan_filtering=1 bridge: Multicast IPv6 to unknown group, promisc [ OK ]
TEST: vlan_filtering=1 bridge: Multicast IPv6 to unknown group, allmulti [ OK ]
[ 195.050000] br0: left promiscuous mode
[ 195.220000] br0: port 1(lan2) entered disabled state
[ 195.480000] gswip 1e108000.switch lan2: left allmulticast mode
[ 195.480000] lantiq,xrx200-net 1e10b308.eth eth0: left allmulticast mode
[ 195.490000] gswip 1e108000.switch lan2: left promiscuous mode
[ 195.490000] br0: port 1(lan2) entered disabled state
[ 195.700000] gswip 1e108000.switch lan1: Link is Down
[ 195.920000] gswip 1e108000.switch lan2: Link is Down
[ 196.260000] gswip 1e108000.switch lan2: entered promiscuous mode
[ 196.790000] gswip 1e108000.switch lan1: configuring for phy/internal link mode
[ 197.240000] gswip 1e108000.switch lan2: left promiscuous mode
[ 197.260000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 197.650000] gswip 1e108000.switch lan2: entered promiscuous mode
[ 199.370000] gswip 1e108000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 199.930000] gswip 1e108000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 215.040000] lan2.100: entered promiscuous mode
[ 220.640000] lan2.100: left promiscuous mode
[ 223.610000] lan2.100: entered allmulticast mode
[ 223.610000] gswip 1e108000.switch lan2: entered allmulticast mode
[ 223.610000] lantiq,xrx200-net 1e10b308.eth eth0: entered allmulticast mode
[ 229.200000] lan2.100: left allmulticast mode
[ 229.200000] gswip 1e108000.switch lan2: left allmulticast mode
[ 229.200000] lantiq,xrx200-net 1e10b308.eth eth0: left allmulticast mode
TEST: VLAN upper: Unicast IPv4 to primary MAC address [FAIL]
reception failed
TEST: VLAN upper: Unicast IPv4 to macvlan MAC address [FAIL]
reception failed
TEST: VLAN upper: Unicast IPv4 to unknown MAC address [FAIL]
reception failed
TEST: VLAN upper: Unicast IPv4 to unknown MAC address, promisc [FAIL]
reception failed
TEST: VLAN upper: Unicast IPv4 to unknown MAC address, allmulti [FAIL]
reception failed
TEST: VLAN upper: Multicast IPv4 to joined group [FAIL]
reception failed
TEST: VLAN upper: Multicast IPv4 to unknown group [ OK ]
TEST: VLAN upper: Multicast IPv4 to unknown group, promisc [FAIL]
reception failed
TEST: VLAN upper: Multicast IPv4 to unknown group, allmulti [FAIL]
reception failed
TEST: VLAN upper: Multicast IPv6 to joined group [FAIL]
reception failed
TEST: VLAN upper: Multicast IPv6 to unknown group [ OK ]
TEST: VLAN upper: Multicast IPv6 to unknown group, promisc [FAIL]
reception failed
TEST: VLAN upper: Multicast IPv6 to unknown group, allmulti [FAIL]
reception failed
TEST: VLAN upper: 1588v2 over L2 transport, Sync [FAIL]
reception failed
TEST: VLAN upper: 1588v2 over L2 transport, Follow-Up [FAIL]
reception failed
TEST: VLAN upper: 1588v2 over L2 transport, Peer Delay Request [FAIL]
reception failed
TEST: VLAN upper: 1588v2 over IPv4, Sync [FAIL]
reception failed
TEST: VLAN upper: 1588v2 over IPv4, Follow-Up [FAIL]
reception failed
TEST: VLAN upper: 1588v2 over IPv4, Peer Delay Request [FAIL]
reception failed
TEST: VLAN upper: 1588v2 over IPv6, Sync [FAIL]
reception failed
TEST: VLAN upper: 1588v2 over IPv6, Follow-Up [FAIL]
reception failed
TEST: VLAN upper: 1588v2 over IPv6, Peer Delay Request [FAIL]
reception failed
[ 239.910000] gswip 1e108000.switch lan2: left promiscuous mode
[ 240.020000] gswip 1e108000.switch lan2: Link is Down
[ 240.400000] gswip 1e108000.switch lan1: Link is Down
[ 240.860000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 241.000000] gswip 1e108000.switch lan2: entered promiscuous mode
[ 241.510000] gswip 1e108000.switch lan1: configuring for phy/internal link mode
[ 241.960000] gswip 1e108000.switch lan2: left promiscuous mode
[ 241.980000] gswip 1e108000.switch lan2: entered promiscuous mode
[ 241.990000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 242.430000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 242.470000] br0: port 1(lan2) entered blocking state
[ 242.470000] br0: port 1(lan2) entered disabled state
[ 242.470000] gswip 1e108000.switch lan2: entered allmulticast mode
[ 242.480000] lantiq,xrx200-net 1e10b308.eth eth0: entered allmulticast mode
[ 244.650000] gswip 1e108000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 245.610000] gswip 1e108000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 245.610000] br0: port 1(lan2) entered blocking state
[ 245.620000] br0: port 1(lan2) entered forwarding state
[ 256.480000] lan2.100: entered promiscuous mode
[ 262.080000] lan2.100: left promiscuous mode
[ 265.090000] lan2.100: entered allmulticast mode
[ 270.690000] lan2.100: left allmulticast mode
TEST: VLAN over vlan_filtering=0 bridged port: Unicast IPv4 to primary MAC address [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Unicast IPv4 to macvlan MAC address [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Unicast IPv4 to unknown MAC address [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Unicast IPv4 to unknown MAC address, promisc [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Unicast IPv4 to unknown MAC address, allmulti [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv4 to joined group [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv4 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv4 to unknown group, promisc [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv4 to unknown group, allmulti [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv6 to joined group [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv6 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv6 to unknown group, promisc [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv6 to unknown group, allmulti [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over L2 transport, Sync [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over L2 transport, Follow-Up [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over L2 transport, Peer Delay Request [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over IPv4, Sync [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over IPv4, Follow-Up [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over IPv4, Peer Delay Request [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over IPv6, Sync [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over IPv6, Follow-Up [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over IPv6, Peer Delay Request [ OK ]
[ 282.120000] gswip 1e108000.switch lan2: left allmulticast mode
[ 282.120000] lantiq,xrx200-net 1e10b308.eth eth0: left allmulticast mode
[ 282.130000] br0: port 1(lan2) entered disabled state
[ 282.400000] gswip 1e108000.switch lan2: Link is Down
[ 282.770000] gswip 1e108000.switch lan1: Link is Down
[ 283.220000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 283.890000] gswip 1e108000.switch lan1: configuring for phy/internal link mode
[ 284.330000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 284.790000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 284.790000] br0: port 1(lan2) entered blocking state
[ 284.800000] br0: port 1(lan2) entered disabled state
[ 284.800000] gswip 1e108000.switch lan2: entered allmulticast mode
[ 284.810000] lantiq,xrx200-net 1e10b308.eth eth0: entered allmulticast mode
[ 286.970000] gswip 1e108000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 286.970000] br0: port 1(lan2) entered blocking state
[ 286.980000] br0: port 1(lan2) entered forwarding state
[ 288.090000] gswip 1e108000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 298.640000] lan2.100: entered promiscuous mode
[ 304.250000] lan2.100: left promiscuous mode
[ 307.260000] lan2.100: entered allmulticast mode
[ 312.880000] lan2.100: left allmulticast mode
TEST: VLAN over vlan_filtering=1 bridged port: Unicast IPv4 to primary MAC address [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Unicast IPv4 to macvlan MAC address [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Unicast IPv4 to unknown MAC address [FAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=1 bridged port: Unicast IPv4 to unknown MAC address, promisc [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Unicast IPv4 to unknown MAC address, allmulti [FAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv4 to joined group [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv4 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv4 to unknown group, promisc [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv4 to unknown group, allmulti [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv6 to joined group [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv6 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv6 to unknown group, promisc [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv6 to unknown group, allmulti [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over L2 transport, Sync [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over L2 transport, Follow-Up [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over L2 transport, Peer Delay Request [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over IPv4, Sync [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over IPv4, Follow-Up [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over IPv4, Peer Delay Request [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over IPv6, Sync [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over IPv6, Follow-Up [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over IPv6, Peer Delay Request [ OK ]
[ 324.810000] gswip 1e108000.switch lan2: left allmulticast mode
[ 324.810000] lantiq,xrx200-net 1e10b308.eth eth0: left allmulticast mode
[ 324.820000] br0: port 1(lan2) entered disabled state
[ 324.850000] gswip 1e108000.switch: bridge to leave does not exists
[ 324.860000] gswip 1e108000.switch: port 2 failed to reset VLAN filtering to 0: -ENOENT
[ 324.990000] gswip 1e108000.switch: bridge to leave does not exists
[ 324.990000] gswip 1e108000.switch lan2: failed to kill vid 8100/100
[ 325.110000] gswip 1e108000.switch lan2: Link is Down
[ 325.510000] gswip 1e108000.switch lan1: Link is Down
[ 326.070000] gswip 1e108000.switch lan1: configuring for phy/internal link mode
[ 326.440000] br0: port 1(lan2) entered blocking state
[ 326.450000] br0: port 1(lan2) entered disabled state
[ 326.450000] gswip 1e108000.switch lan2: entered allmulticast mode
[ 326.460000] lantiq,xrx200-net 1e10b308.eth eth0: entered allmulticast mode
[ 326.550000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 327.160000] br0: entered promiscuous mode
[ 328.650000] gswip 1e108000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 328.650000] br0: port 1(lan2) entered blocking state
[ 328.660000] br0: port 1(lan2) entered forwarding state
[ 329.200000] gswip 1e108000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 340.530000] br0.100: entered promiscuous mode
[ 346.160000] br0.100: left promiscuous mode
[ 349.150000] br0.100: entered allmulticast mode
[ 349.150000] br0: entered allmulticast mode
[ 354.790000] br0.100: left allmulticast mode
[ 354.790000] br0: left allmulticast mode
TEST: VLAN over vlan_filtering=0 bridge: Unicast IPv4 to primary MAC address [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Unicast IPv4 to macvlan MAC address [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Unicast IPv4 to unknown MAC address [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Unicast IPv4 to unknown MAC address, promisc [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Unicast IPv4 to unknown MAC address, allmulti [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv4 to joined group [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv4 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv4 to unknown group, promisc [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv4 to unknown group, allmulti [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv6 to joined group [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv6 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv6 to unknown group, promisc [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv6 to unknown group, allmulti [ OK ]
[ 358.590000] br0: left promiscuous mode
[ 358.810000] br0: port 1(lan2) entered disabled state
[ 359.070000] gswip 1e108000.switch lan2: left allmulticast mode
[ 359.080000] lantiq,xrx200-net 1e10b308.eth eth0: left allmulticast mode
[ 359.080000] br0: port 1(lan2) entered disabled state
[ 359.370000] gswip 1e108000.switch lan1: Link is Down
[ 359.850000] gswip 1e108000.switch lan2: Link is Down
[ 359.950000] gswip 1e108000.switch lan1: configuring for phy/internal link mode
[ 360.330000] br0: port 1(lan2) entered blocking state
[ 360.330000] br0: port 1(lan2) entered disabled state
[ 360.330000] gswip 1e108000.switch lan2: entered allmulticast mode
[ 360.340000] lantiq,xrx200-net 1e10b308.eth eth0: entered allmulticast mode
[ 361.070000] br0: entered promiscuous mode
[ 362.080000] gswip 1e108000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 362.970000] gswip 1e108000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 362.970000] br0: port 1(lan2) entered blocking state
[ 362.980000] br0: port 1(lan2) entered forwarding state
[ 373.550000] br0.100: entered promiscuous mode
[ 379.140000] br0.100: left promiscuous mode
[ 382.140000] br0.100: entered allmulticast mode
[ 382.140000] br0: entered allmulticast mode
[ 387.780000] br0.100: left allmulticast mode
[ 387.780000] br0: left allmulticast mode
TEST: VLAN over vlan_filtering=1 bridge: Unicast IPv4 to primary MAC address [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Unicast IPv4 to macvlan MAC address [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Unicast IPv4 to unknown MAC address [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Unicast IPv4 to unknown MAC address, promisc [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Unicast IPv4 to unknown MAC address, allmulti [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv4 to joined group [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv4 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv4 to unknown group, promisc [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv4 to unknown group, allmulti [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv6 to joined group [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv6 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv6 to unknown group, promisc [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv6 to unknown group, allmulti [ OK ]
[ 391.710000] br0: left promiscuous mode
[ 391.930000] br0: port 1(lan2) entered disabled state
[ 392.200000] gswip 1e108000.switch lan2: left allmulticast mode
[ 392.200000] lantiq,xrx200-net 1e10b308.eth eth0: left allmulticast mode
[ 392.210000] br0: port 1(lan2) entered disabled state
[ 392.480000] gswip 1e108000.switch lan1: Link is Down
[ 392.840000] gswip 1e108000.switch lan2: Link is Down
root@OpenWrt:/selftests/drivers/net/dsa#
next prev parent reply other threads:[~2025-09-20 1:07 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-18 7:21 [PATCH net 0/2] lantiq_gswip fixes Vladimir Oltean
2025-09-18 7:21 ` [PATCH net 1/2] net: dsa: lantiq_gswip: move gswip_add_single_port_br() call to port_setup() Vladimir Oltean
2025-09-18 7:21 ` [PATCH net 2/2] net: dsa: lantiq_gswip: suppress -EINVAL errors for bridge FDB entries added to the CPU port Vladimir Oltean
2025-09-19 23:50 ` [PATCH net 0/2] lantiq_gswip fixes Jakub Kicinski
2025-09-20 1:07 ` Daniel Golle [this message]
2025-09-22 11:07 ` Vladimir Oltean
2025-09-22 18:34 ` Jakub Kicinski
2025-09-24 4:18 ` Daniel Golle
2025-09-25 7:35 ` Paolo Abeni
2025-09-25 8:14 ` Vladimir Oltean
2025-09-25 8:27 ` Paolo Abeni
2025-09-25 8:50 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aM3-Tf9kHkNP2XRN@pidgin.makrotopia.org \
--to=daniel@makrotopia.org \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hauke@hauke-m.de \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).