[PATCH v5 0/3] drivers: net: mhi: Add support to enable ethernet network device for MHI NET driver

[PATCH v5 0/3] drivers: net: mhi: Add support to enable ethernet network device for MHI NET driver

[Vivek Pernamitta]

- Add support to enable ethernet network device for MHI NET driver
  currenlty we have support only NET driver. so new client can be
  configured to be Ethernet type over MHI by setting
  "mhi_device_info.ethernet_if = true"

- Add support for new MHI channels for M-plane, NETCONF and S-plane.

Signed-off-by: Vivek Pernamitta <vivek.pernamitta@oss.qualcomm.com>
---
previous patchset link: https://lore.kernel.org/all/20250724-b4-eth_us-v1-0-4dff04a9a128@quicinc.com/

changes to v5:
- change in email ID from "quic_vpernami@quicinc.com" to "vivek.pernamitta@oss.qualcomm.com"
- Renamed to patch v5 as per comments from Manivannan
- Restored to original name as per comments from Jakub
- Renamed the ethernet interfce to eth%d as per Jakub
---

---
Vivek Pernamitta (3):
      net: mhi : Add support to enable ethernet interface
      net: mhi: Add MHI IP_SW1, ETH0 and ETH1 interface
      bus: mhi: host: pci: Enable IP_SW1, IP_ETH0 and IP_ETH1 channels for QDU100

 drivers/bus/mhi/host/pci_generic.c |  8 ++++
 drivers/net/mhi_net.c              | 87 ++++++++++++++++++++++++++++++++------
 2 files changed, 82 insertions(+), 13 deletions(-)
---
base-commit: df5d79720b152e7ff058f11ed7e88d5b5c8d2a0c
change-id: 20251106-vdev_next-20251106_eth-dd145c3bbd9a

Best regards,
-- 
Vivek Pernamitta <<quic_vpernami@quicinc.com>>

[PATCH v5 1/3] net: mhi : Add support to enable ethernet interface

[Vivek Pernamitta]

From: Vivek Pernamitta <vivek.pernamitta@oss.qualcomm.com>

Currently, we only have support for the NET driver. This update allows a
new client to be configured as an Ethernet type over MHI by setting
"mhi_device_info.ethernet_if = true". A new interface for Ethernet will
be created with eth%d.

Signed-off-by: Vivek Pernamitta <vivek.pernamitta@oss.qualcomm.com>
---
 drivers/net/mhi_net.c | 84 +++++++++++++++++++++++++++++++++++++++++++--------
 1 file changed, 71 insertions(+), 13 deletions(-)

diff --git a/drivers/net/mhi_net.c b/drivers/net/mhi_net.c
index ae169929a9d8e449b5a427993abf68e8d032fae2..aeb2d67aeb238e520dbd2a83b35602a7e5144fa2 100644
--- a/drivers/net/mhi_net.c
+++ b/drivers/net/mhi_net.c
@@ -11,6 +11,7 @@
 #include <linux/netdevice.h>
 #include <linux/skbuff.h>
 #include <linux/u64_stats_sync.h>
+#include <linux/etherdevice.h>
 
 #define MHI_NET_MIN_MTU		ETH_MIN_MTU
 #define MHI_NET_MAX_MTU		0xffff
@@ -38,10 +39,12 @@ struct mhi_net_dev {
 	u32 rx_queue_sz;
 	int msg_enable;
 	unsigned int mru;
+	bool ethernet_if;
 };
 
 struct mhi_device_info {
 	const char *netname;
+	bool ethernet_if;
 };
 
 static int mhi_ndo_open(struct net_device *ndev)
@@ -119,11 +122,37 @@ static void mhi_ndo_get_stats64(struct net_device *ndev,
 	} while (u64_stats_fetch_retry(&mhi_netdev->stats.tx_syncp, start));
 }
 
+static int mhi_mac_address(struct net_device *dev, void *p)
+{
+	int ret;
+
+	if (dev->type == ARPHRD_ETHER) {
+		ret = eth_mac_addr(dev, p);
+	return ret;
+	}
+
+	return 0;
+}
+
+static int mhi_validate_address(struct net_device *dev)
+{
+	int ret;
+
+	if (dev->type == ARPHRD_ETHER) {
+		ret = eth_validate_addr(dev);
+		return ret;
+	}
+
+	return 0;
+}
+
 static const struct net_device_ops mhi_netdev_ops = {
 	.ndo_open               = mhi_ndo_open,
 	.ndo_stop               = mhi_ndo_stop,
 	.ndo_start_xmit         = mhi_ndo_xmit,
 	.ndo_get_stats64	= mhi_ndo_get_stats64,
+	.ndo_set_mac_address    = mhi_mac_address,
+	.ndo_validate_addr      = mhi_validate_address,
 };
 
 static void mhi_net_setup(struct net_device *ndev)
@@ -140,6 +169,14 @@ static void mhi_net_setup(struct net_device *ndev)
 	ndev->tx_queue_len = 1000;
 }
 
+static void mhi_ethernet_setup(struct net_device *ndev)
+{
+	ndev->netdev_ops = &mhi_netdev_ops;
+	ether_setup(ndev);
+	ndev->min_mtu = ETH_MIN_MTU;
+	ndev->max_mtu = ETH_MAX_MTU;
+}
+
 static struct sk_buff *mhi_net_skb_agg(struct mhi_net_dev *mhi_netdev,
 				       struct sk_buff *skb)
 {
@@ -209,16 +246,22 @@ static void mhi_net_dl_callback(struct mhi_device *mhi_dev,
 			mhi_netdev->skbagg_head = NULL;
 		}
 
-		switch (skb->data[0] & 0xf0) {
-		case 0x40:
-			skb->protocol = htons(ETH_P_IP);
-			break;
-		case 0x60:
-			skb->protocol = htons(ETH_P_IPV6);
-			break;
-		default:
-			skb->protocol = htons(ETH_P_MAP);
-			break;
+		if (mhi_netdev->ethernet_if) {
+			skb_copy_to_linear_data(skb, skb->data,
+						mhi_res->bytes_xferd);
+			skb->protocol = eth_type_trans(skb, mhi_netdev->ndev);
+		} else {
+			switch (skb->data[0] & 0xf0) {
+			case 0x40:
+				skb->protocol = htons(ETH_P_IP);
+				break;
+			case 0x60:
+				skb->protocol = htons(ETH_P_IPV6);
+				break;
+			default:
+				skb->protocol = htons(ETH_P_MAP);
+				break;
+			}
 		}
 
 		u64_stats_update_begin(&mhi_netdev->stats.rx_syncp);
@@ -301,11 +344,17 @@ static void mhi_net_rx_refill_work(struct work_struct *work)
 		schedule_delayed_work(&mhi_netdev->rx_refill, HZ / 2);
 }
 
-static int mhi_net_newlink(struct mhi_device *mhi_dev, struct net_device *ndev)
+static int mhi_net_newlink(struct mhi_device *mhi_dev, struct net_device *ndev, bool eth_dev)
 {
 	struct mhi_net_dev *mhi_netdev;
 	int err;
 
+	if (eth_dev) {
+		eth_hw_addr_random(ndev);
+		if (!is_valid_ether_addr(ndev->dev_addr))
+			return -EADDRNOTAVAIL;
+	}
+
 	mhi_netdev = netdev_priv(ndev);
 
 	dev_set_drvdata(&mhi_dev->dev, mhi_netdev);
@@ -313,6 +362,7 @@ static int mhi_net_newlink(struct mhi_device *mhi_dev, struct net_device *ndev)
 	mhi_netdev->mdev = mhi_dev;
 	mhi_netdev->skbagg_head = NULL;
 	mhi_netdev->mru = mhi_dev->mhi_cntrl->mru;
+	mhi_netdev->ethernet_if = eth_dev;
 
 	INIT_DELAYED_WORK(&mhi_netdev->rx_refill, mhi_net_rx_refill_work);
 	u64_stats_init(&mhi_netdev->stats.rx_syncp);
@@ -356,13 +406,14 @@ static int mhi_net_probe(struct mhi_device *mhi_dev,
 	int err;
 
 	ndev = alloc_netdev(sizeof(struct mhi_net_dev), info->netname,
-			    NET_NAME_PREDICTABLE, mhi_net_setup);
+			    NET_NAME_PREDICTABLE, info->ethernet_if ?
+			    mhi_ethernet_setup : mhi_net_setup);
 	if (!ndev)
 		return -ENOMEM;
 
 	SET_NETDEV_DEV(ndev, &mhi_dev->dev);
 
-	err = mhi_net_newlink(mhi_dev, ndev);
+	err = mhi_net_newlink(mhi_dev, ndev, info->ethernet_if);
 	if (err) {
 		free_netdev(ndev);
 		return err;
@@ -380,10 +431,17 @@ static void mhi_net_remove(struct mhi_device *mhi_dev)
 
 static const struct mhi_device_info mhi_hwip0 = {
 	.netname = "mhi_hwip%d",
+	.ethernet_if = false,
 };
 
 static const struct mhi_device_info mhi_swip0 = {
 	.netname = "mhi_swip%d",
+	.ethernet_if = false,
+};
+
+static const struct mhi_device_info mhi_eth0 = {
+	.netname = "eth%d",
+	.ethernet_if = true,
 };
 
 static const struct mhi_device_id mhi_net_id_table[] = {

-- 
2.34.1

[PATCH v5 2/3] net: mhi: Add MHI IP_SW1, ETH0 and ETH1 interface

[Vivek Pernamitta]

From: Vivek Pernamitta <vivek.pernamitta@oss.qualcomm.com>

Add IP_SW1, ETH0 and ETH1 network interfaces are required
for M-plane, Nefconf and S-plane component.

Signed-off-by: Vivek Pernamitta <vivek.pernamitta@oss.qualcomm.com>
---
 drivers/net/mhi_net.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/mhi_net.c b/drivers/net/mhi_net.c
index aeb2d67aeb238e520dbd2a83b35602a7e5144fa2..7fca7b1ec7b8250fca5b99ba6d1be470fed87995 100644
--- a/drivers/net/mhi_net.c
+++ b/drivers/net/mhi_net.c
@@ -449,6 +449,9 @@ static const struct mhi_device_id mhi_net_id_table[] = {
 	{ .chan = "IP_HW0", .driver_data = (kernel_ulong_t)&mhi_hwip0 },
 	/* Software data PATH (to modem CPU) */
 	{ .chan = "IP_SW0", .driver_data = (kernel_ulong_t)&mhi_swip0 },
+	{ .chan = "IP_SW1", .driver_data = (kernel_ulong_t)&mhi_swip0 },
+	{ .chan = "IP_ETH0", .driver_data = (kernel_ulong_t)&mhi_eth0 },
+	{ .chan = "IP_ETH1", .driver_data = (kernel_ulong_t)&mhi_eth0 },
 	{}
 };
 MODULE_DEVICE_TABLE(mhi, mhi_net_id_table);

-- 
2.34.1

[PATCH v5 3/3] bus: mhi: host: pci: Enable IP_SW1, IP_ETH0 and IP_ETH1 channels for QDU100

[Vivek Pernamitta]

From: Vivek Pernamitta <vivek.pernamitta@oss.qualcomm.com>

Enable IP_SW1, IP_ETH0 and IP_ETH1 channels for M-plane, NETCONF and
S-plane interface for QDU100.

Signed-off-by: Vivek Pernamitta <vivek.pernamitta@oss.qualcomm.com>
---
 drivers/bus/mhi/host/pci_generic.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
index 3d8c9729fcfc57f38315d0386e2d2bdf8b7a8e1d..eace36054af9d04ac24538c8b9beeaa37c15b84d 100644
--- a/drivers/bus/mhi/host/pci_generic.c
+++ b/drivers/bus/mhi/host/pci_generic.c
@@ -269,6 +269,13 @@ static const struct mhi_channel_config mhi_qcom_qdu100_channels[] = {
 	MHI_CHANNEL_CONFIG_DL(41, "MHI_PHC", 32, 4),
 	MHI_CHANNEL_CONFIG_UL(46, "IP_SW0", 256, 5),
 	MHI_CHANNEL_CONFIG_DL(47, "IP_SW0", 256, 5),
+	MHI_CHANNEL_CONFIG_UL(48, "IP_SW1", 256, 6),
+	MHI_CHANNEL_CONFIG_DL(49, "IP_SW1", 256, 6),
+	MHI_CHANNEL_CONFIG_UL(50, "IP_ETH0", 256, 7),
+	MHI_CHANNEL_CONFIG_DL(51, "IP_ETH0", 256, 7),
+	MHI_CHANNEL_CONFIG_UL(52, "IP_ETH1", 256, 8),
+	MHI_CHANNEL_CONFIG_DL(53, "IP_ETH1", 256, 8),
+
 };
 
 static struct mhi_event_config mhi_qcom_qdu100_events[] = {
@@ -284,6 +291,7 @@ static struct mhi_event_config mhi_qcom_qdu100_events[] = {
 	MHI_EVENT_CONFIG_SW_DATA(5, 512),
 	MHI_EVENT_CONFIG_SW_DATA(6, 512),
 	MHI_EVENT_CONFIG_SW_DATA(7, 512),
+	MHI_EVENT_CONFIG_SW_DATA(8, 512),
 };
 
 static const struct mhi_controller_config mhi_qcom_qdu100_config = {

-- 
2.34.1

Re: [PATCH v5 1/3] net: mhi : Add support to enable ethernet interface

[Simon Horman]

On Thu, Nov 06, 2025 at 06:58:08PM +0530, Vivek Pernamitta wrote:
> From: Vivek Pernamitta <vivek.pernamitta@oss.qualcomm.com>
> 
> Currently, we only have support for the NET driver. This update allows a
> new client to be configured as an Ethernet type over MHI by setting
> "mhi_device_info.ethernet_if = true". A new interface for Ethernet will
> be created with eth%d.
> 
> Signed-off-by: Vivek Pernamitta <vivek.pernamitta@oss.qualcomm.com>

...

> @@ -119,11 +122,37 @@ static void mhi_ndo_get_stats64(struct net_device *ndev,
>  	} while (u64_stats_fetch_retry(&mhi_netdev->stats.tx_syncp, start));
>  }
>  
> +static int mhi_mac_address(struct net_device *dev, void *p)
> +{
> +	int ret;
> +
> +	if (dev->type == ARPHRD_ETHER) {
> +		ret = eth_mac_addr(dev, p);
> +	return ret;

nit: the indentation for the line above seems incorrect.

> +	}

But I wonder if we can simplify this slightly, like this:

	if (dev->type == ARPHRD_ETHER)
		return eth_mac_addr(dev, p);

Which would allow ret to be entirely removed from this function.

> +
> +	return 0;
> +}
> +
> +static int mhi_validate_address(struct net_device *dev)
> +{
> +	int ret;
> +
> +	if (dev->type == ARPHRD_ETHER) {
> +		ret = eth_validate_addr(dev);
> +		return ret;
> +	}

Likewise here.

> +
> +	return 0;
> +}

...

> @@ -140,6 +169,14 @@ static void mhi_net_setup(struct net_device *ndev)
>  	ndev->tx_queue_len = 1000;
>  }
>  
> +static void mhi_ethernet_setup(struct net_device *ndev)
> +{
> +	ndev->netdev_ops = &mhi_netdev_ops;
> +	ether_setup(ndev);
> +	ndev->min_mtu = ETH_MIN_MTU;

nit: The configuration on the line above is included in ether_setup.

> +	ndev->max_mtu = ETH_MAX_MTU;
> +}
> +
>  static struct sk_buff *mhi_net_skb_agg(struct mhi_net_dev *mhi_netdev,
>  				       struct sk_buff *skb)
>  {

...

> @@ -380,10 +431,17 @@ static void mhi_net_remove(struct mhi_device *mhi_dev)
>  
>  static const struct mhi_device_info mhi_hwip0 = {
>  	.netname = "mhi_hwip%d",
> +	.ethernet_if = false,
>  };
>  
>  static const struct mhi_device_info mhi_swip0 = {
>  	.netname = "mhi_swip%d",
> +	.ethernet_if = false,
> +};
> +
> +static const struct mhi_device_info mhi_eth0 = {
> +	.netname = "eth%d",
> +	.ethernet_if = true,
>  };

W=1 builds warn that mhi_eth0 is unused.
I think this can be addressed by squashing patches 1/2 and 2/2.

...

-- 
pw-bot: changes-requested

Re: [PATCH v5 1/3] net: mhi : Add support to enable ethernet interface

[Dmitry Baryshkov]

On Thu, Nov 06, 2025 at 06:58:08PM +0530, Vivek Pernamitta wrote:
> From: Vivek Pernamitta <vivek.pernamitta@oss.qualcomm.com>
> 
> Currently, we only have support for the NET driver. This update allows a
> new client to be configured as an Ethernet type over MHI by setting
> "mhi_device_info.ethernet_if = true". A new interface for Ethernet will
> be created with eth%d.

Please describe the reasons for the patch. Also please don't use words
like "This patch" or "This update". Use imperative language instead.

> 
> Signed-off-by: Vivek Pernamitta <vivek.pernamitta@oss.qualcomm.com>
> ---
>  drivers/net/mhi_net.c | 84 +++++++++++++++++++++++++++++++++++++++++++--------
>  1 file changed, 71 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/net/mhi_net.c b/drivers/net/mhi_net.c
> index ae169929a9d8e449b5a427993abf68e8d032fae2..aeb2d67aeb238e520dbd2a83b35602a7e5144fa2 100644
> --- a/drivers/net/mhi_net.c
> +++ b/drivers/net/mhi_net.c
> @@ -11,6 +11,7 @@
>  #include <linux/netdevice.h>
>  #include <linux/skbuff.h>
>  #include <linux/u64_stats_sync.h>
> +#include <linux/etherdevice.h>

Keep it sorted.

>  
>  #define MHI_NET_MIN_MTU		ETH_MIN_MTU
>  #define MHI_NET_MAX_MTU		0xffff
> @@ -38,10 +39,12 @@ struct mhi_net_dev {
>  	u32 rx_queue_sz;
>  	int msg_enable;
>  	unsigned int mru;
> +	bool ethernet_if;
>  };
>  
>  struct mhi_device_info {
>  	const char *netname;
> +	bool ethernet_if;
>  };
>  
>  static int mhi_ndo_open(struct net_device *ndev)
> @@ -119,11 +122,37 @@ static void mhi_ndo_get_stats64(struct net_device *ndev,
>  	} while (u64_stats_fetch_retry(&mhi_netdev->stats.tx_syncp, start));
>  }
>  
> +static int mhi_mac_address(struct net_device *dev, void *p)
> +{
> +	int ret;
> +
> +	if (dev->type == ARPHRD_ETHER) {
> +		ret = eth_mac_addr(dev, p);
> +	return ret;

Why do you need an interim variable?

> +	}
> +
> +	return 0;
> +}
> +
> +static int mhi_validate_address(struct net_device *dev)
> +{
> +	int ret;
> +
> +	if (dev->type == ARPHRD_ETHER) {
> +		ret = eth_validate_addr(dev);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
>  static const struct net_device_ops mhi_netdev_ops = {
>  	.ndo_open               = mhi_ndo_open,
>  	.ndo_stop               = mhi_ndo_stop,
>  	.ndo_start_xmit         = mhi_ndo_xmit,
>  	.ndo_get_stats64	= mhi_ndo_get_stats64,
> +	.ndo_set_mac_address    = mhi_mac_address,
> +	.ndo_validate_addr      = mhi_validate_address,
>  };
>  
>  static void mhi_net_setup(struct net_device *ndev)
> @@ -140,6 +169,14 @@ static void mhi_net_setup(struct net_device *ndev)
>  	ndev->tx_queue_len = 1000;
>  }
>  
> +static void mhi_ethernet_setup(struct net_device *ndev)
> +{
> +	ndev->netdev_ops = &mhi_netdev_ops;
> +	ether_setup(ndev);
> +	ndev->min_mtu = ETH_MIN_MTU;
> +	ndev->max_mtu = ETH_MAX_MTU;
> +}
> +
>  static struct sk_buff *mhi_net_skb_agg(struct mhi_net_dev *mhi_netdev,
>  				       struct sk_buff *skb)
>  {
> @@ -209,16 +246,22 @@ static void mhi_net_dl_callback(struct mhi_device *mhi_dev,
>  			mhi_netdev->skbagg_head = NULL;
>  		}
>  
> -		switch (skb->data[0] & 0xf0) {
> -		case 0x40:
> -			skb->protocol = htons(ETH_P_IP);
> -			break;
> -		case 0x60:
> -			skb->protocol = htons(ETH_P_IPV6);
> -			break;
> -		default:
> -			skb->protocol = htons(ETH_P_MAP);
> -			break;
> +		if (mhi_netdev->ethernet_if) {
> +			skb_copy_to_linear_data(skb, skb->data,
> +						mhi_res->bytes_xferd);
> +			skb->protocol = eth_type_trans(skb, mhi_netdev->ndev);
> +		} else {
> +			switch (skb->data[0] & 0xf0) {
> +			case 0x40:
> +				skb->protocol = htons(ETH_P_IP);
> +				break;
> +			case 0x60:
> +				skb->protocol = htons(ETH_P_IPV6);
> +				break;
> +			default:
> +				skb->protocol = htons(ETH_P_MAP);
> +				break;
> +			}
>  		}
>  
>  		u64_stats_update_begin(&mhi_netdev->stats.rx_syncp);
> @@ -301,11 +344,17 @@ static void mhi_net_rx_refill_work(struct work_struct *work)
>  		schedule_delayed_work(&mhi_netdev->rx_refill, HZ / 2);
>  }
>  
> -static int mhi_net_newlink(struct mhi_device *mhi_dev, struct net_device *ndev)
> +static int mhi_net_newlink(struct mhi_device *mhi_dev, struct net_device *ndev, bool eth_dev)
>  {
>  	struct mhi_net_dev *mhi_netdev;
>  	int err;
>  
> +	if (eth_dev) {
> +		eth_hw_addr_random(ndev);
> +		if (!is_valid_ether_addr(ndev->dev_addr))

Can this actually happen? Can eth_hw_addr_random() generate invalid
address?

> +			return -EADDRNOTAVAIL;
> +	}
> +
>  	mhi_netdev = netdev_priv(ndev);
>  
>  	dev_set_drvdata(&mhi_dev->dev, mhi_netdev);
> @@ -313,6 +362,7 @@ static int mhi_net_newlink(struct mhi_device *mhi_dev, struct net_device *ndev)
>  	mhi_netdev->mdev = mhi_dev;
>  	mhi_netdev->skbagg_head = NULL;
>  	mhi_netdev->mru = mhi_dev->mhi_cntrl->mru;
> +	mhi_netdev->ethernet_if = eth_dev;
>  
>  	INIT_DELAYED_WORK(&mhi_netdev->rx_refill, mhi_net_rx_refill_work);
>  	u64_stats_init(&mhi_netdev->stats.rx_syncp);
> @@ -356,13 +406,14 @@ static int mhi_net_probe(struct mhi_device *mhi_dev,
>  	int err;
>  
>  	ndev = alloc_netdev(sizeof(struct mhi_net_dev), info->netname,
> -			    NET_NAME_PREDICTABLE, mhi_net_setup);
> +			    NET_NAME_PREDICTABLE, info->ethernet_if ?
> +			    mhi_ethernet_setup : mhi_net_setup);
>  	if (!ndev)
>  		return -ENOMEM;
>  
>  	SET_NETDEV_DEV(ndev, &mhi_dev->dev);
>  
> -	err = mhi_net_newlink(mhi_dev, ndev);
> +	err = mhi_net_newlink(mhi_dev, ndev, info->ethernet_if);
>  	if (err) {
>  		free_netdev(ndev);
>  		return err;
> @@ -380,10 +431,17 @@ static void mhi_net_remove(struct mhi_device *mhi_dev)
>  
>  static const struct mhi_device_info mhi_hwip0 = {
>  	.netname = "mhi_hwip%d",
> +	.ethernet_if = false,
>  };
>  
>  static const struct mhi_device_info mhi_swip0 = {
>  	.netname = "mhi_swip%d",
> +	.ethernet_if = false,
> +};
> +
> +static const struct mhi_device_info mhi_eth0 = {

Unused

> +	.netname = "eth%d",
> +	.ethernet_if = true,
>  };
>  
>  static const struct mhi_device_id mhi_net_id_table[] = {
> 
> -- 
> 2.34.1
> 

-- 
With best wishes
Dmitry

Re: [PATCH v5 2/3] net: mhi: Add MHI IP_SW1, ETH0 and ETH1 interface

[Dmitry Baryshkov]

On Thu, Nov 06, 2025 at 06:58:09PM +0530, Vivek Pernamitta wrote:
> From: Vivek Pernamitta <vivek.pernamitta@oss.qualcomm.com>
> 
> Add IP_SW1, ETH0 and ETH1 network interfaces are required
> for M-plane, Nefconf and S-plane component.

This is a very useful, totally uncryptic message.

> 
> Signed-off-by: Vivek Pernamitta <vivek.pernamitta@oss.qualcomm.com>
> ---
>  drivers/net/mhi_net.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/net/mhi_net.c b/drivers/net/mhi_net.c
> index aeb2d67aeb238e520dbd2a83b35602a7e5144fa2..7fca7b1ec7b8250fca5b99ba6d1be470fed87995 100644
> --- a/drivers/net/mhi_net.c
> +++ b/drivers/net/mhi_net.c
> @@ -449,6 +449,9 @@ static const struct mhi_device_id mhi_net_id_table[] = {
>  	{ .chan = "IP_HW0", .driver_data = (kernel_ulong_t)&mhi_hwip0 },
>  	/* Software data PATH (to modem CPU) */
>  	{ .chan = "IP_SW0", .driver_data = (kernel_ulong_t)&mhi_swip0 },
> +	{ .chan = "IP_SW1", .driver_data = (kernel_ulong_t)&mhi_swip0 },
> +	{ .chan = "IP_ETH0", .driver_data = (kernel_ulong_t)&mhi_eth0 },
> +	{ .chan = "IP_ETH1", .driver_data = (kernel_ulong_t)&mhi_eth0 },
>  	{}
>  };
>  MODULE_DEVICE_TABLE(mhi, mhi_net_id_table);
> 
> -- 
> 2.34.1
> 

-- 
With best wishes
Dmitry