public inbox for netdev@vger.kernel.org
 help / color / mirror / Atom feed
From: "Russell King (Oracle)" <linux@armlinux.org.uk>
To: "Heiko Stübner" <heiko@sntech.de>
Cc: Andrew Lunn <andrew@lunn.ch>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org,
	linux-stm32@st-md-mailman.stormreply.com, netdev@vger.kernel.org,
	Paolo Abeni <pabeni@redhat.com>
Subject: Re: [PATCH net-next 5/6] net: stmmac: rk: use rk_encode_wm16() for clock selection
Date: Wed, 4 Feb 2026 22:26:21 +0000	[thread overview]
Message-ID: <aYPHjS0wrtXlRb1a@shell.armlinux.org.uk> (raw)
In-Reply-To: <20297648.sWSEgdgrri@diego>

On Wed, Feb 04, 2026 at 11:03:51PM +0100, Heiko Stübner wrote:
> Am Mittwoch, 4. Februar 2026, 10:14:38 Mitteleuropäische Normalzeit schrieb Russell King (Oracle):
> > Use rk_encode_wm16() for RMII clock gating control, and also for the
> > io_clksel bit used to select the transmit clock between CRU-derived
> > and IO-derived clock sources.
> > 
> > Both of these were configured via the "set_clock_selection" method in
> > the SoC specific operations, but there is no requirement to change the
> > io_clksel except when enabling clocks.
> > 
> > It is also possible that we don't need to ungate the RMII clock if we
> > are operating in RGMII mode, but this commit makes no change there.
> > 
> > Split up the configuration of these as separate functions, and remove
> > the set_clock_selection() method. Since these clocking bits are in the
> > same register that we call the "speed" register, move the logic for
> > writing that register into rk_write_speed_grf_reg().
> > 
> > Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
> > ---
> >  .../net/ethernet/stmicro/stmmac/dwmac-rk.c    | 174 ++++++++----------
> >  1 file changed, 75 insertions(+), 99 deletions(-)
> > 
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
> > index 4099cbc5d0de..ed9adac70f0a 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
> > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
> > @@ -27,8 +27,17 @@
> >  struct rk_priv_data;
> >  
> >  struct rk_clock_fields {
> > +	/* io_clksel_cru_mask - io_clksel bit in clock GRF register which,
> > +	 * when set, selects the tx clock from CRU.
> > +	 */
> > +	u16 io_clksel_cru_mask;
> > +	/* io_clksel_io_mask - io_clksel bit in clock GRF register which,
> > +	 * when set, selects the tx clock from IO.
> > +	 */
> 
> nit: comment stile does not seem to follow the kernel coding style
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/process/coding-style.rst#n622

netdev has historically had this style which is separate from the rest
of the kernel. The file already uses this comment style, so it is
entirely correct to keep to the style which already exists in this
file, rather than mixing styles and turning it into a mess.

> Reviewed-by: Heiko Stuebner <heiko@sntech.de>
> Tested-by: Heiko Stuebner <heiko@sntech.de> #px30,rk3328,rk3568,rk3588

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!

  reply	other threads:[~2026-02-04 22:26 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-02-04  9:14 [PATCH net-next 0/6] net: stmmac: rk: final cleanups part Russell King (Oracle)
2026-02-04  9:14 ` [PATCH net-next 1/6] net: stmmac: rk: introduce flags indicating support for RGMII/RMII Russell King (Oracle)
2026-02-04  9:39   ` Maxime Chevallier
2026-02-04 19:57   ` Heiko Stübner
2026-02-04  9:14 ` [PATCH net-next 2/6] net: stmmac: rk: replace empty set_to_rmii() with supports_rmii Russell King (Oracle)
2026-02-04  9:40   ` Maxime Chevallier
2026-02-04 19:58   ` Heiko Stübner
2026-02-04  9:14 ` [PATCH net-next 3/6] net: stmmac: rk: rk3328: gmac2phy only supports RMII Russell King (Oracle)
2026-02-04  9:43   ` Maxime Chevallier
2026-02-04 20:00   ` Heiko Stübner
2026-02-04  9:14 ` [PATCH net-next 4/6] net: stmmac: rk: rk3528: gmac0 " Russell King (Oracle)
2026-02-04  9:43   ` Maxime Chevallier
2026-02-04 20:01   ` Heiko Stübner
2026-02-04  9:14 ` [PATCH net-next 5/6] net: stmmac: rk: use rk_encode_wm16() for clock selection Russell King (Oracle)
2026-02-04 22:03   ` Heiko Stübner
2026-02-04 22:26     ` Russell King (Oracle) [this message]
2026-02-05  7:44       ` Heiko Stübner
2026-02-04  9:14 ` [PATCH net-next 6/6] net: stmmac: rk: rk3506, rk3528 and rk3588 have rmii_mode in clock register Russell King (Oracle)
2026-02-04 21:54   ` Heiko Stübner
2026-02-05 17:30 ` [PATCH net-next 0/6] net: stmmac: rk: final cleanups part patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aYPHjS0wrtXlRb1a@shell.armlinux.org.uk \
    --to=linux@armlinux.org.uk \
    --cc=alexandre.torgue@foss.st.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=heiko@sntech.de \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox