From: Ian Ray <ian.ray@gehealthcare.com>
To: Jakub Kicinski <kuba@kernel.org>
Cc: ryasuoka@redhat.com, jeremy@jcline.org, krzk@kernel.org,
netdev@vger.kernel.org, davem@davemloft.net,
linux-kernel@vger.kernel.org, horms@kernel.org,
pabeni@redhat.com, edumazet@google.com
Subject: Re: nfc: nci: Fix zero-length proprietary OIDs
Date: Mon, 23 Feb 2026 09:26:20 +0200 [thread overview]
Message-ID: <aZwBHFx7g7wbWOWJ@zeus> (raw)
In-Reply-To: <20260220213419.3181677-1-kuba@kernel.org>
On Fri, Feb 20, 2026 at 01:34:19PM -0800, Jakub Kicinski wrote:
> CAUTION: This email originated from outside of GE HealthCare. Only open links or attachments if you trust the sender. Report suspicious emails using Outlook’s “Report” button.
>
> This is an AI-generated review of your patch. The human sending this
> email has considered the AI review valid, or at least plausible.
>
> For local reproduction steps see https://netdev-ai.bots.linux.dev/ai-local.html
> ---
> nfc: nci: Fix zero-length proprietary OIDs
>
> This patch allows zero-length payloads for proprietary OIDs (0x20-0x3F)
> to support the NXP NCI_RF_TXLDO_ERROR_NTF notification case.
>
> > diff --git a/net/nfc/nci/core.c b/net/nfc/nci/core.c
> > index e419e020a70a..78da0fb9ef3f 100644
> > --- a/net/nfc/nci/core.c
> > +++ b/net/nfc/nci/core.c
> > @@ -1482,10 +1482,16 @@ static bool nci_valid_size(struct sk_buff *skb)
> > unsigned int hdr_size = NCI_CTRL_HDR_SIZE;
> >
> > if (skb->len < hdr_size ||
> > - !nci_plen(skb->data) ||
> > skb->len < hdr_size + nci_plen(skb->data)) {
> > return false;
> > }
> > +
> > + /* Require non-zero length for standard OIDs (0x00 - 0x1F).
> > + * But allow zero length in the proprietary range (0x20 - 0x3F). */
> > + if (!nci_plen(skb->data))
> > + if (nci_opcode_oid(nci_opcode(skb->data)) <= 0x1F)
> > + return false;
>
> Does this validation logic create a buffer over-read vulnerability in the
> Samsung s3fwrn5 driver?
Good catch; the proposed change impacts:
drivers/nfc/st-nci/core.c : st_nci_prop_rsp_packet
drivers/nfc/s3fwrn5/nci.c : s3fwrn5_nci_prop_rsp
drivers/nfc/nxp-nci/core.c : n/a
drivers/nfc/fdp/fdp.c : fdp_nci_core_get_config_rsp_packet
drivers/nfc/fdp/fdp.c : fdp_nci_prop_patch_rsp_packet
drivers/nfc/fdp/fdp.c : fdp_nci_prop_patch_ntf_packet
drivers/nfc/fdp/fdp.c : fdp_nci_prop_set_production_data_rsp_packet
Restricting the patch to NTF only would make it safer and less
intrusive; I will do this in V2.
>
> The patch allows zero-length payloads for any proprietary OID (0x20-0x3F)
> without distinguishing between notification (NTF) and response (RSP)
> message types. The s3fwrn5 driver registers RSP handlers for proprietary
> OIDs 0x22, 0x26, 0x27, and 0x28 that all unconditionally read skb->data[0]:
>
> drivers/nfc/s3fwrn5/nci.c:s3fwrn5_nci_prop_rsp() {
> __u8 status = skb->data[0]; // No length check
> nci_req_complete(ndev, status);
> return 0;
> }
>
> If hardware sends a malformed zero-length RSP packet with one of these
> proprietary OIDs, the validation would pass (since OID > 0x1F), then
> nci_rsp_packet() calls skb_pull(skb, NCI_CTRL_HDR_SIZE) leaving
> skb->len = 0, and s3fwrn5_nci_prop_rsp() accesses skb->data[0] on a
> zero-length buffer.
>
> The commit message justifies allowing zero-length for the NXP NTF case
> (OID 0x23), which has a handler that doesn't access skb data. But the
> implementation applies to ALL proprietary OIDs including RSP messages.
>
> Would it be safer to either:
> 1) Restrict the zero-length exception to notification packets only
> 2) Check that all proprietary OID handlers can safely handle zero-length
> 3) Add a length check before skb->data[0] access in s3fwrn5_nci_prop_rsp()
> --
> pw-bot: cr
next prev parent reply other threads:[~2026-02-23 7:26 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-20 11:25 [PATCH] nfc: nci: Fix zero-length proprietary OIDs Ian Ray
2026-02-20 21:34 ` Jakub Kicinski
2026-02-23 7:26 ` Ian Ray [this message]
2026-02-20 21:36 ` [PATCH] " Jakub Kicinski
2026-02-23 7:29 ` Ian Ray
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aZwBHFx7g7wbWOWJ@zeus \
--to=ian.ray@gehealthcare.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=jeremy@jcline.org \
--cc=krzk@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=ryasuoka@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox