Re: [PATCH 01/14] arm64: dts: qcom: kodiak: Add EL2 overlay

[Sumit Garg <sumit.garg@kernel.org>]

On Mon, Mar 09, 2026 at 01:30:49PM +0530, Mukesh Ojha wrote:
> On Fri, Mar 06, 2026 at 04:20:14PM +0530, Sumit Garg wrote:
> > From: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
> > 
> > All the existing variants Kodiak boards are using Gunyah hypervisor
> > which means that, so far, Linux-based OS could only boot in EL1 on those
> > devices.  However, it is possible for us to boot Linux at EL2 on these
> > devices [1].
> > 
> > When running under Gunyah, the remote processor firmware IOMMU
> > streams are controlled by Gunyah. However, without Gunyah, the IOMMU is
> > managed by the consumer of this DeviceTree. Therefore, describe the
> > firmware streams for each remote processor.
> > 
> > Add a EL2-specific DT overlay and apply it to Kodiak IOT variant
> > devices to create -el2.dtb for each of them alongside "normal" dtb.
> > 
> > [1]
> > https://docs.qualcomm.com/bundle/publicresource/topics/80-70020-4/boot-developer-touchpoints.html#uefi
> > 
> > Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
> > [SG: watchdog fixup]
> > Signed-off-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
> 
> Thanks for posting, I was about to add kodiak to the already existing
> list monaco, talos here
> https://lore.kernel.org/lkml/20260127-talos-el2-overlay-v2-0-b6a2266532c4@oss.qualcomm.com/
> 
> but did you really miss linux-kernel@vger.kernel.org or is it
> intentional ?

Ah I see, I missed that list. Will add in v2. BTW, this patch in the
series can be applied independently since it will work with existing
SCM interfaces provided by QTEE.

-Sumit

> 
> > ---
> >  arch/arm64/boot/dts/qcom/Makefile        |  2 ++
> >  arch/arm64/boot/dts/qcom/kodiak-el2.dtso | 35 ++++++++++++++++++++++++
> >  2 files changed, 37 insertions(+)
> >  create mode 100644 arch/arm64/boot/dts/qcom/kodiak-el2.dtso
> > 
> > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> > index f80b5d9cf1e8..09a7f943190e 100644
> > --- a/arch/arm64/boot/dts/qcom/Makefile
> > +++ b/arch/arm64/boot/dts/qcom/Makefile
> > @@ -139,6 +139,8 @@ dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
> >  dtb-$(CONFIG_ARCH_QCOM)	+= qcs615-ride.dtb
> >  dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-radxa-dragon-q6a.dtb
> >  dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2.dtb
> > +qcs6490-rb3gen2-el2-dtbs := qcs6490-rb3gen2.dtb kodiak-el2.dtbo
> > +dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2-el2.dtb
> >  
> >  qcs6490-rb3gen2-vision-mezzanine-dtbs := qcs6490-rb3gen2.dtb qcs6490-rb3gen2-vision-mezzanine.dtbo
> >  qcs6490-rb3gen2-industrial-mezzanine-dtbs := qcs6490-rb3gen2.dtb qcs6490-rb3gen2-industrial-mezzanine.dtbo
> > diff --git a/arch/arm64/boot/dts/qcom/kodiak-el2.dtso b/arch/arm64/boot/dts/qcom/kodiak-el2.dtso
> > new file mode 100644
> > index 000000000000..0b3a69a0d765
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/qcom/kodiak-el2.dtso
> > @@ -0,0 +1,35 @@
> > +// SPDX-License-Identifier: BSD-3-Clause
> > +/*
> > + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
> > + *
> > + * Kodiak specific modifications required to boot in EL2.
> > + */
> > +
> > +
> > +/dts-v1/;
> > +/plugin/;
> > +
> > +&gpu_zap_shader {
> > +	status = "disabled";
> > +};
> > +
> > +&remoteproc_adsp {
> > +	iommus = <&apps_smmu 0x1800 0x0>;
> > +};
> > +
> > +&remoteproc_cdsp {
> > +	iommus = <&apps_smmu 0x11a0 0x0400>;
> > +};
> > +
> > +&remoteproc_wpss {
> > +	iommus = <&apps_smmu 0x1c03 0x1>,
> > +		 <&apps_smmu 0x1c83 0x1>;
> > +};
> > +
> > +&venus {
> > +	status = "disabled";
> > +};
> > +
> > +&watchdog {
> > +	status = "okay";
> > +};
> > -- 
> > 2.51.0
> > 
> 
> -- 
> -Mukesh Ojha
>