Re: [PATCH net-next v2 4/4] net: phy: Introduce Airoha AN8801/R Gigabit Ethernet PHY driver

["Russell King (Oracle)" <linux@armlinux.org.uk>]

On Thu, Mar 26, 2026 at 04:24:23PM +0100, Andrew Lunn wrote:
> On Thu, Mar 26, 2026 at 03:13:19PM +0000, Russell King (Oracle) wrote:
> > On Thu, Mar 26, 2026 at 01:04:15PM +0100, Louis-Alexis Eyraud wrote:
> > > +static int an8801r_set_wol(struct phy_device *phydev,
> > > +			   struct ethtool_wolinfo *wol)
> > > +{
> > > +	struct net_device *attach_dev = phydev->attached_dev;
> > > +	const unsigned char *macaddr = attach_dev->dev_addr;
> > 
> > This isn't a criticism for this patch, but a discussion point for
> > phylib itself.
> > 
> > It occurs to me that there's a weakness in the phylib interface for WoL,
> > specifically when WoL is enabled at the PHY, but someone then changes
> > the interface's MAC address - there doesn't seem to be a way for the
> > address programmed into the PHY to be updated. Should there be?
> > 
> > Do we instead expect users to disable WoL before changing the MAC for
> > a network interface?
> 
> Program the MAC address during suspend? I assume userspace is no
> longer active at this point, so the address should be stable.

What is the timing requirements for a system going into suspend vs a WoL
packet being sent? Should a WoL packet abort entry into suspend? If yes,
then we need to program the MAC before the PHY is suspended, because
suspend could already be in progress.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!